Victron miniBMS / smallBMS with pre-alarm
The Victron miniBMS/smallBMS with pre-alarm is a cutting-edge battery management system designed to safeguard your Victron Smart LiFePo4 batteries with utmost precision and efficiency when not being used with a MultiPlus and Quattro inverter/charger systems due to no VE.Bus. Engineered...
See full specifications ↓Available to order online
- OnlineIn stock
- In-storeOut of stock
Orders are dispatched from Victoria.
Call 1300 003 978 to check availability.
- Genuine products with manufacturer warranty
- Free shipping on orders over $99
- Expert support: 1300 003 978 · Mon–Fri 9am–6pm
- Secure checkout
The Victron miniBMS/smallBMS with pre-alarm is a cutting-edge battery management system designed to safeguard your Victron Smart LiFePo4 batteries with utmost precision and efficiency when not being used with a MultiPlus and Quattro inverter/charger systems due to no VE.Bus. Engineered by Victron Energy, a leader in renewable energy solutions, this compact BMS is packed with advanced features to ensure the longevity and optimal performance of your Victron Lithium Battery Smart system.
Designed for seamless integration into your energy storage setup, the Victron miniBMS/smallBMS offers comprehensive protection against overcharging, over-discharging, and short circuits. The pre-alarm function provides an early warning system, alerting you to potential issues before they escalate, allowing you to take proactive measures to prevent damage to your batteries.
Equipped with intelligent balancing technology, this BMS ensures that each cell in the battery bank is maintained at the same voltage level, maximising the overall capacity and efficiency of the system. The user-friendly interface allows for easy monitoring of vital parameters such as voltage, current, and temperature, giving you full visibility and control over your battery system.
Features
- Load disconnect output: Can be used to control the remote on/off input of a BatteryProtect, Inverters, DC-DC converter or other loads that have remote on/off port functionality. Due to its maximum output current of 1A, it can even control a high-current relay or a contactor. Note that a non inverting or inverting on/off cable may be required, please consult the manual.
- Pre-alarm output: The pre-alarm output can be used to issue a visible or audible warning when the battery voltage is low and will trip with a minimum delay of 30 seconds before the Load disconnect output is disabled due to cell undervoltage.
- Charge disconnect output: Can be used to control the remote on/off port of a charger, such as the Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner or a BatteryProtect. The output is normally high and becomes free floating in case of imminent low cell voltage or high/low temperature. Note that the Charge disconnect output is not suitable to power an inductive load such as a relay coil. smallBMS Cyrix Combiners designed for use with the smallBMS and the VE.Bus BMS: Cyrix-Li-ct (120A or 230A) Is a battery combiner with a Li-ion adapted engage/disengage profile and a control terminal to connect to the Charge Disconnect of the BMS. Cyrix-Li-Charge (120A or 230A) Is a unidirectional combiner to insert in between a battery charger and the LFP battery. It will engage only when charge voltage from a battery charger is present on its charge-side terminal. A control terminal connects to the Charge Disconnect of the BMS.
- Remote on/off terminal: Both the Load and Charge disconnect output can be controlled remotely via the remote on/off terminal. When off, both outputs will be free floating so that loads and chargers are turned off.
- LED indicators: The smallBMS has two LED indicators, a blue LED indicating that the Load disconnect output is still high and the cell voltage is above the threshold set in the battery, and a red LED indicating that the Charge disconnect output is low due to high/low cell temperature or high cell voltage.
General
| Brand | Victron Energy |
|---|---|
| Model / SKU | ENG-VT-00161 |
| Category | Battery Management System (BMS) |
Warranty
Every product we sell is genuine and covered by the manufacturer's warranty.
Faulty item or warranty claim? Call 1300 003 978 (Mon–Fri 9am–6pm) or email info@tekcart.com.au.
Delivery
- Free shipping on orders over $99
- Orders are dispatched from Victoria
- Professional installation available in VIC, NSW & ACT — request a quote
Payment
Pay securely at checkout with:
All prices are in Australian dollars and include GST.
Frequently asked questions
Are your products genuine?
Yes. Every product we sell is genuine and covered by the manufacturer's warranty.
Can you install this for me?
Yes. Our technicians supply and install CCTV, alarm and networking systems across Victoria, New South Wales and the ACT. Request a quote.
How much is shipping?
Shipping is free on orders over $99. Orders are dispatched from Victoria. See our delivery information.
This item shows out of stock. What can I do?
Call us on 1300 003 978 to check availability, or leave your email under "Notify me" and we'll tell you when it's back.
Can I get help choosing the right product?
Yes. Call 1300 003 978 (Mon–Fri 9am–6pm) or email info@tekcart.com.au.




Need it installed?
Our technicians supply and install security and networking systems across VIC, NSW & ACT.
Request a quote → 1300 003 978Other Customers also buy:
-
-
{"id":9724088057945,"title":"Victron miniBMS \/ smallBMS with pre-alarm","handle":"victron-minibms-smallbms-with-pre-alarm","description":"\u003cp\u003eThe Victron miniBMS\/smallBMS with pre-alarm is a cutting-edge battery management system designed to safeguard your \u003cspan\u003eVictron Smart LiFePo4\u003c\/span\u003e batteries with utmost precision and efficiency when not being used with a \u003cspan\u003eMultiPlus and Quattro inverter\/charger systems due to no VE.Bus\u003c\/span\u003e. Engineered by Victron Energy, a leader in renewable energy solutions, this compact BMS is packed with advanced features to ensure the longevity and optimal performance of your Victron Lithium Battery Smart system.\u003cbr\u003e\u003cbr\u003eDesigned for seamless integration into your energy storage setup, the Victron miniBMS\/smallBMS offers comprehensive protection against overcharging, over-discharging, and short circuits. The pre-alarm function provides an early warning system, alerting you to potential issues before they escalate, allowing you to take proactive measures to prevent damage to your batteries.\u003cbr\u003e\u003cbr\u003eEquipped with intelligent balancing technology, this BMS ensures that each cell in the battery bank is maintained at the same voltage level, maximising the overall capacity and efficiency of the system. The user-friendly interface allows for easy monitoring of vital parameters such as voltage, current, and temperature, giving you full visibility and control over your battery system.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off input of a BatteryProtect, Inverters, DC-DC converter or other loads that have remote on\/off port functionality. Due to its maximum output current of 1A, it can even control a high-current relay or a contactor. Note that a non inverting or inverting on\/off cable may be required, please consult the manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-alarm output:\u003c\/strong\u003e The pre-alarm output can be used to issue a visible or audible warning when the battery voltage is low and will trip with a minimum delay of 30 seconds before the Load disconnect output is disabled due to cell undervoltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off port of a charger, such as the Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner or a BatteryProtect. The output is normally high and becomes free floating in case of imminent low cell voltage or high\/low temperature. Note that the Charge disconnect output is not suitable to power an inductive load such as a relay coil. smallBMS Cyrix Combiners designed for use with the smallBMS and the VE.Bus BMS: Cyrix-Li-ct (120A or 230A) Is a battery combiner with a Li-ion adapted engage\/disengage profile and a control terminal to connect to the Charge Disconnect of the BMS. Cyrix-Li-Charge (120A or 230A) Is a unidirectional combiner to insert in between a battery charger and the LFP battery. It will engage only when charge voltage from a battery charger is present on its charge-side terminal. A control terminal connects to the Charge Disconnect of the BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote on\/off terminal:\u003c\/strong\u003e Both the Load and Charge disconnect output can be controlled remotely via the remote on\/off terminal. When off, both outputs will be free floating so that loads and chargers are turned off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e The smallBMS has two LED indicators, a blue LED indicating that the Load disconnect output is still high and the cell voltage is above the threshold set in the battery, and a red LED indicating that the Charge disconnect output is low due to high\/low cell temperature or high cell voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com.au\/upload\/documents\/Datasheet-smallBMS-with-pre-alarm-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","published_at":"2026-11-20T03:25:55+11:00","created_at":"2026-11-20T03:25:54+11:00","vendor":"Victron Energy","type":"Battery Management System (BMS)","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":9269,"price_min":9269,"price_max":9269,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908382605401,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ENG-VT-00161","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Victron miniBMS \/ smallBMS with pre-alarm","public_title":null,"options":["Default Title"],"price":9269,"weight":90,"compare_at_price":null,"inventory_management":"shopify","barcode":"8719076043485","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","options":["Title"],"media":[{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613677145,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613709913,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613742681,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613775449,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613808217,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613840985,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Victron miniBMS\/smallBMS with pre-alarm is a cutting-edge battery management system designed to safeguard your \u003cspan\u003eVictron Smart LiFePo4\u003c\/span\u003e batteries with utmost precision and efficiency when not being used with a \u003cspan\u003eMultiPlus and Quattro inverter\/charger systems due to no VE.Bus\u003c\/span\u003e. Engineered by Victron Energy, a leader in renewable energy solutions, this compact BMS is packed with advanced features to ensure the longevity and optimal performance of your Victron Lithium Battery Smart system.\u003cbr\u003e\u003cbr\u003eDesigned for seamless integration into your energy storage setup, the Victron miniBMS\/smallBMS offers comprehensive protection against overcharging, over-discharging, and short circuits. The pre-alarm function provides an early warning system, alerting you to potential issues before they escalate, allowing you to take proactive measures to prevent damage to your batteries.\u003cbr\u003e\u003cbr\u003eEquipped with intelligent balancing technology, this BMS ensures that each cell in the battery bank is maintained at the same voltage level, maximising the overall capacity and efficiency of the system. The user-friendly interface allows for easy monitoring of vital parameters such as voltage, current, and temperature, giving you full visibility and control over your battery system.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off input of a BatteryProtect, Inverters, DC-DC converter or other loads that have remote on\/off port functionality. Due to its maximum output current of 1A, it can even control a high-current relay or a contactor. Note that a non inverting or inverting on\/off cable may be required, please consult the manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-alarm output:\u003c\/strong\u003e The pre-alarm output can be used to issue a visible or audible warning when the battery voltage is low and will trip with a minimum delay of 30 seconds before the Load disconnect output is disabled due to cell undervoltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off port of a charger, such as the Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner or a BatteryProtect. The output is normally high and becomes free floating in case of imminent low cell voltage or high\/low temperature. Note that the Charge disconnect output is not suitable to power an inductive load such as a relay coil. smallBMS Cyrix Combiners designed for use with the smallBMS and the VE.Bus BMS: Cyrix-Li-ct (120A or 230A) Is a battery combiner with a Li-ion adapted engage\/disengage profile and a control terminal to connect to the Charge Disconnect of the BMS. Cyrix-Li-Charge (120A or 230A) Is a unidirectional combiner to insert in between a battery charger and the LFP battery. It will engage only when charge voltage from a battery charger is present on its charge-side terminal. A control terminal connects to the Charge Disconnect of the BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote on\/off terminal:\u003c\/strong\u003e Both the Load and Charge disconnect output can be controlled remotely via the remote on\/off terminal. When off, both outputs will be free floating so that loads and chargers are turned off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e The smallBMS has two LED indicators, a blue LED indicating that the Load disconnect output is still high and the cell voltage is above the threshold set in the battery, and a red LED indicating that the Charge disconnect output is low due to high\/low cell temperature or high cell voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com.au\/upload\/documents\/Datasheet-smallBMS-with-pre-alarm-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $125.72 -
Translation missing: en.products.product.regular_price $119.00 Sold Out
-
Translation missing: en.products.product.regular_price $198.00 Sold Out
-
Translation missing: en.products.product.regular_price $61.00 Sold Out
-
-
{"id":9724088057945,"title":"Victron miniBMS \/ smallBMS with pre-alarm","handle":"victron-minibms-smallbms-with-pre-alarm","description":"\u003cp\u003eThe Victron miniBMS\/smallBMS with pre-alarm is a cutting-edge battery management system designed to safeguard your \u003cspan\u003eVictron Smart LiFePo4\u003c\/span\u003e batteries with utmost precision and efficiency when not being used with a \u003cspan\u003eMultiPlus and Quattro inverter\/charger systems due to no VE.Bus\u003c\/span\u003e. Engineered by Victron Energy, a leader in renewable energy solutions, this compact BMS is packed with advanced features to ensure the longevity and optimal performance of your Victron Lithium Battery Smart system.\u003cbr\u003e\u003cbr\u003eDesigned for seamless integration into your energy storage setup, the Victron miniBMS\/smallBMS offers comprehensive protection against overcharging, over-discharging, and short circuits. The pre-alarm function provides an early warning system, alerting you to potential issues before they escalate, allowing you to take proactive measures to prevent damage to your batteries.\u003cbr\u003e\u003cbr\u003eEquipped with intelligent balancing technology, this BMS ensures that each cell in the battery bank is maintained at the same voltage level, maximising the overall capacity and efficiency of the system. The user-friendly interface allows for easy monitoring of vital parameters such as voltage, current, and temperature, giving you full visibility and control over your battery system.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off input of a BatteryProtect, Inverters, DC-DC converter or other loads that have remote on\/off port functionality. Due to its maximum output current of 1A, it can even control a high-current relay or a contactor. Note that a non inverting or inverting on\/off cable may be required, please consult the manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-alarm output:\u003c\/strong\u003e The pre-alarm output can be used to issue a visible or audible warning when the battery voltage is low and will trip with a minimum delay of 30 seconds before the Load disconnect output is disabled due to cell undervoltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off port of a charger, such as the Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner or a BatteryProtect. The output is normally high and becomes free floating in case of imminent low cell voltage or high\/low temperature. Note that the Charge disconnect output is not suitable to power an inductive load such as a relay coil. smallBMS Cyrix Combiners designed for use with the smallBMS and the VE.Bus BMS: Cyrix-Li-ct (120A or 230A) Is a battery combiner with a Li-ion adapted engage\/disengage profile and a control terminal to connect to the Charge Disconnect of the BMS. Cyrix-Li-Charge (120A or 230A) Is a unidirectional combiner to insert in between a battery charger and the LFP battery. It will engage only when charge voltage from a battery charger is present on its charge-side terminal. A control terminal connects to the Charge Disconnect of the BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote on\/off terminal:\u003c\/strong\u003e Both the Load and Charge disconnect output can be controlled remotely via the remote on\/off terminal. When off, both outputs will be free floating so that loads and chargers are turned off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e The smallBMS has two LED indicators, a blue LED indicating that the Load disconnect output is still high and the cell voltage is above the threshold set in the battery, and a red LED indicating that the Charge disconnect output is low due to high\/low cell temperature or high cell voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com.au\/upload\/documents\/Datasheet-smallBMS-with-pre-alarm-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","published_at":"2026-11-20T03:25:55+11:00","created_at":"2026-11-20T03:25:54+11:00","vendor":"Victron Energy","type":"Battery Management System (BMS)","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":9269,"price_min":9269,"price_max":9269,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908382605401,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ENG-VT-00161","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Victron miniBMS \/ smallBMS with pre-alarm","public_title":null,"options":["Default Title"],"price":9269,"weight":90,"compare_at_price":null,"inventory_management":"shopify","barcode":"8719076043485","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","options":["Title"],"media":[{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613677145,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613709913,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613742681,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613775449,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613808217,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613840985,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Victron miniBMS\/smallBMS with pre-alarm is a cutting-edge battery management system designed to safeguard your \u003cspan\u003eVictron Smart LiFePo4\u003c\/span\u003e batteries with utmost precision and efficiency when not being used with a \u003cspan\u003eMultiPlus and Quattro inverter\/charger systems due to no VE.Bus\u003c\/span\u003e. Engineered by Victron Energy, a leader in renewable energy solutions, this compact BMS is packed with advanced features to ensure the longevity and optimal performance of your Victron Lithium Battery Smart system.\u003cbr\u003e\u003cbr\u003eDesigned for seamless integration into your energy storage setup, the Victron miniBMS\/smallBMS offers comprehensive protection against overcharging, over-discharging, and short circuits. The pre-alarm function provides an early warning system, alerting you to potential issues before they escalate, allowing you to take proactive measures to prevent damage to your batteries.\u003cbr\u003e\u003cbr\u003eEquipped with intelligent balancing technology, this BMS ensures that each cell in the battery bank is maintained at the same voltage level, maximising the overall capacity and efficiency of the system. The user-friendly interface allows for easy monitoring of vital parameters such as voltage, current, and temperature, giving you full visibility and control over your battery system.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off input of a BatteryProtect, Inverters, DC-DC converter or other loads that have remote on\/off port functionality. Due to its maximum output current of 1A, it can even control a high-current relay or a contactor. Note that a non inverting or inverting on\/off cable may be required, please consult the manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-alarm output:\u003c\/strong\u003e The pre-alarm output can be used to issue a visible or audible warning when the battery voltage is low and will trip with a minimum delay of 30 seconds before the Load disconnect output is disabled due to cell undervoltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off port of a charger, such as the Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner or a BatteryProtect. The output is normally high and becomes free floating in case of imminent low cell voltage or high\/low temperature. Note that the Charge disconnect output is not suitable to power an inductive load such as a relay coil. smallBMS Cyrix Combiners designed for use with the smallBMS and the VE.Bus BMS: Cyrix-Li-ct (120A or 230A) Is a battery combiner with a Li-ion adapted engage\/disengage profile and a control terminal to connect to the Charge Disconnect of the BMS. Cyrix-Li-Charge (120A or 230A) Is a unidirectional combiner to insert in between a battery charger and the LFP battery. It will engage only when charge voltage from a battery charger is present on its charge-side terminal. A control terminal connects to the Charge Disconnect of the BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote on\/off terminal:\u003c\/strong\u003e Both the Load and Charge disconnect output can be controlled remotely via the remote on\/off terminal. When off, both outputs will be free floating so that loads and chargers are turned off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e The smallBMS has two LED indicators, a blue LED indicating that the Load disconnect output is still high and the cell voltage is above the threshold set in the battery, and a red LED indicating that the Charge disconnect output is low due to high\/low cell temperature or high cell voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com.au\/upload\/documents\/Datasheet-smallBMS-with-pre-alarm-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $216.85 -
-
{"id":9724088057945,"title":"Victron miniBMS \/ smallBMS with pre-alarm","handle":"victron-minibms-smallbms-with-pre-alarm","description":"\u003cp\u003eThe Victron miniBMS\/smallBMS with pre-alarm is a cutting-edge battery management system designed to safeguard your \u003cspan\u003eVictron Smart LiFePo4\u003c\/span\u003e batteries with utmost precision and efficiency when not being used with a \u003cspan\u003eMultiPlus and Quattro inverter\/charger systems due to no VE.Bus\u003c\/span\u003e. Engineered by Victron Energy, a leader in renewable energy solutions, this compact BMS is packed with advanced features to ensure the longevity and optimal performance of your Victron Lithium Battery Smart system.\u003cbr\u003e\u003cbr\u003eDesigned for seamless integration into your energy storage setup, the Victron miniBMS\/smallBMS offers comprehensive protection against overcharging, over-discharging, and short circuits. The pre-alarm function provides an early warning system, alerting you to potential issues before they escalate, allowing you to take proactive measures to prevent damage to your batteries.\u003cbr\u003e\u003cbr\u003eEquipped with intelligent balancing technology, this BMS ensures that each cell in the battery bank is maintained at the same voltage level, maximising the overall capacity and efficiency of the system. The user-friendly interface allows for easy monitoring of vital parameters such as voltage, current, and temperature, giving you full visibility and control over your battery system.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off input of a BatteryProtect, Inverters, DC-DC converter or other loads that have remote on\/off port functionality. Due to its maximum output current of 1A, it can even control a high-current relay or a contactor. Note that a non inverting or inverting on\/off cable may be required, please consult the manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-alarm output:\u003c\/strong\u003e The pre-alarm output can be used to issue a visible or audible warning when the battery voltage is low and will trip with a minimum delay of 30 seconds before the Load disconnect output is disabled due to cell undervoltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off port of a charger, such as the Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner or a BatteryProtect. The output is normally high and becomes free floating in case of imminent low cell voltage or high\/low temperature. Note that the Charge disconnect output is not suitable to power an inductive load such as a relay coil. smallBMS Cyrix Combiners designed for use with the smallBMS and the VE.Bus BMS: Cyrix-Li-ct (120A or 230A) Is a battery combiner with a Li-ion adapted engage\/disengage profile and a control terminal to connect to the Charge Disconnect of the BMS. Cyrix-Li-Charge (120A or 230A) Is a unidirectional combiner to insert in between a battery charger and the LFP battery. It will engage only when charge voltage from a battery charger is present on its charge-side terminal. A control terminal connects to the Charge Disconnect of the BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote on\/off terminal:\u003c\/strong\u003e Both the Load and Charge disconnect output can be controlled remotely via the remote on\/off terminal. When off, both outputs will be free floating so that loads and chargers are turned off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e The smallBMS has two LED indicators, a blue LED indicating that the Load disconnect output is still high and the cell voltage is above the threshold set in the battery, and a red LED indicating that the Charge disconnect output is low due to high\/low cell temperature or high cell voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com.au\/upload\/documents\/Datasheet-smallBMS-with-pre-alarm-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","published_at":"2026-11-20T03:25:55+11:00","created_at":"2026-11-20T03:25:54+11:00","vendor":"Victron Energy","type":"Battery Management System (BMS)","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":9269,"price_min":9269,"price_max":9269,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908382605401,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ENG-VT-00161","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Victron miniBMS \/ smallBMS with pre-alarm","public_title":null,"options":["Default Title"],"price":9269,"weight":90,"compare_at_price":null,"inventory_management":"shopify","barcode":"8719076043485","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556","\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","options":["Title"],"media":[{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613677145,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_top_-_2__01934.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613709913,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_front_-_2__92373.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613742681,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_left_-_2__64125.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613775449,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_right_-_2__11839.1718060068.jpg?v=1795105557","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613808217,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_connections_-_2__62407.1718060068.jpg?v=1795105556","width":1280},{"alt":"Victron miniBMS \/ smallBMS with pre-alarm","id":41844613840985,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/smallBMS_molex_-_2__30686.1718060068.jpg?v=1795105556","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Victron miniBMS\/smallBMS with pre-alarm is a cutting-edge battery management system designed to safeguard your \u003cspan\u003eVictron Smart LiFePo4\u003c\/span\u003e batteries with utmost precision and efficiency when not being used with a \u003cspan\u003eMultiPlus and Quattro inverter\/charger systems due to no VE.Bus\u003c\/span\u003e. Engineered by Victron Energy, a leader in renewable energy solutions, this compact BMS is packed with advanced features to ensure the longevity and optimal performance of your Victron Lithium Battery Smart system.\u003cbr\u003e\u003cbr\u003eDesigned for seamless integration into your energy storage setup, the Victron miniBMS\/smallBMS offers comprehensive protection against overcharging, over-discharging, and short circuits. The pre-alarm function provides an early warning system, alerting you to potential issues before they escalate, allowing you to take proactive measures to prevent damage to your batteries.\u003cbr\u003e\u003cbr\u003eEquipped with intelligent balancing technology, this BMS ensures that each cell in the battery bank is maintained at the same voltage level, maximising the overall capacity and efficiency of the system. The user-friendly interface allows for easy monitoring of vital parameters such as voltage, current, and temperature, giving you full visibility and control over your battery system.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off input of a BatteryProtect, Inverters, DC-DC converter or other loads that have remote on\/off port functionality. Due to its maximum output current of 1A, it can even control a high-current relay or a contactor. Note that a non inverting or inverting on\/off cable may be required, please consult the manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-alarm output:\u003c\/strong\u003e The pre-alarm output can be used to issue a visible or audible warning when the battery voltage is low and will trip with a minimum delay of 30 seconds before the Load disconnect output is disabled due to cell undervoltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge disconnect output:\u003c\/strong\u003e Can be used to control the remote on\/off port of a charger, such as the Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner or a BatteryProtect. The output is normally high and becomes free floating in case of imminent low cell voltage or high\/low temperature. Note that the Charge disconnect output is not suitable to power an inductive load such as a relay coil. smallBMS Cyrix Combiners designed for use with the smallBMS and the VE.Bus BMS: Cyrix-Li-ct (120A or 230A) Is a battery combiner with a Li-ion adapted engage\/disengage profile and a control terminal to connect to the Charge Disconnect of the BMS. Cyrix-Li-Charge (120A or 230A) Is a unidirectional combiner to insert in between a battery charger and the LFP battery. It will engage only when charge voltage from a battery charger is present on its charge-side terminal. A control terminal connects to the Charge Disconnect of the BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote on\/off terminal:\u003c\/strong\u003e Both the Load and Charge disconnect output can be controlled remotely via the remote on\/off terminal. When off, both outputs will be free floating so that loads and chargers are turned off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e The smallBMS has two LED indicators, a blue LED indicating that the Load disconnect output is still high and the cell voltage is above the threshold set in the battery, and a red LED indicating that the Charge disconnect output is low due to high\/low cell temperature or high cell voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com.au\/upload\/documents\/Datasheet-smallBMS-with-pre-alarm-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e"}





