TRIO Suction Cup Mounts (4 pack) for Mini Speedmount
Set of 4 suction cup mounts for use with the Mini Speedmounts. Specifications Diameter: 11.43cm Bolt Size: M6 female threads Holding Force: 30kg each With one-year manufacturer’s warranty for assured reliability and peace of mind. Suction Cup Mount Instructions: 1....
See full specifications ↓Available to order online
- OnlineIn stock
- In-storeOut of stock
Orders are dispatched from Victoria.
Call 1300 003 978 to check availability.
- Genuine products with manufacturer warranty
- Free shipping on orders over $99
- Expert support: 1300 003 978 · Mon–Fri 9am–6pm
- Secure checkout
Set of 4 suction cup mounts for use with the Mini Speedmounts.
Specifications
Diameter: 11.43cm
Bolt Size: M6 female threads
Holding Force: 30kg each
With one-year manufacturer’s warranty for assured reliability and peace of mind.
Suction Cup Mount Instructions:
1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount
2. Thread the screws into the landing pads and tighten using the allen key supplied.
3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.
4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE/BOAT ETC.
5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.
6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!
** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.
IMPORTANT NOTE: Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty: 1 year
General
| Brand | TRIO Flatmount |
|---|---|
| Model / SKU | MAS-TR-00015 |
| Category | Mounts |
Warranty
Every product we sell is genuine and covered by the manufacturer's warranty.
Faulty item or warranty claim? Call 1300 003 978 (Mon–Fri 9am–6pm) or email info@tekcart.com.au.
Delivery
- Free shipping on orders over $99
- Orders are dispatched from Victoria
- Professional installation available in VIC, NSW & ACT — request a quote
Payment
Pay securely at checkout with:
All prices are in Australian dollars and include GST.
Frequently asked questions
Are your products genuine?
Yes. Every product we sell is genuine and covered by the manufacturer's warranty.
Can you install this for me?
Yes. Our technicians supply and install CCTV, alarm and networking systems across Victoria, New South Wales and the ACT. Request a quote.
How much is shipping?
Shipping is free on orders over $99. Orders are dispatched from Victoria. See our delivery information.
This item shows out of stock. What can I do?
Call us on 1300 003 978 to check availability, or leave your email under "Notify me" and we'll tell you when it's back.
Can I get help choosing the right product?
Yes. Call 1300 003 978 (Mon–Fri 9am–6pm) or email info@tekcart.com.au.




Need it installed?
Our technicians supply and install security and networking systems across VIC, NSW & ACT.
Request a quote → 1300 003 978Other Customers also buy:
-
-
{"id":9724114796633,"title":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","handle":"trio-suction-cup-mounts-4-pack-for-mini-speedmount","description":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e","published_at":"2026-11-20T03:31:49+11:00","created_at":"2026-11-20T03:31:48+11:00","vendor":"TRIO Flatmount","type":"Mounts","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":45254,"price_min":45254,"price_max":45254,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908412227673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MAS-TR-00015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","public_title":null,"options":["Default Title"],"price":45254,"weight":400,"compare_at_price":null,"inventory_management":"shopify","barcode":"MAS-TR-00015","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","options":["Title"],"media":[{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666302553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","width":1200},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666335321,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666368089,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666400857,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $9.00 -
-
{"id":9724114796633,"title":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","handle":"trio-suction-cup-mounts-4-pack-for-mini-speedmount","description":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e","published_at":"2026-11-20T03:31:49+11:00","created_at":"2026-11-20T03:31:48+11:00","vendor":"TRIO Flatmount","type":"Mounts","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":45254,"price_min":45254,"price_max":45254,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908412227673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MAS-TR-00015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","public_title":null,"options":["Default Title"],"price":45254,"weight":400,"compare_at_price":null,"inventory_management":"shopify","barcode":"MAS-TR-00015","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","options":["Title"],"media":[{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666302553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","width":1200},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666335321,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666368089,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666400857,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $384.00 -
-
{"id":9724114796633,"title":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","handle":"trio-suction-cup-mounts-4-pack-for-mini-speedmount","description":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e","published_at":"2026-11-20T03:31:49+11:00","created_at":"2026-11-20T03:31:48+11:00","vendor":"TRIO Flatmount","type":"Mounts","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":45254,"price_min":45254,"price_max":45254,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908412227673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MAS-TR-00015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","public_title":null,"options":["Default Title"],"price":45254,"weight":400,"compare_at_price":null,"inventory_management":"shopify","barcode":"MAS-TR-00015","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","options":["Title"],"media":[{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666302553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","width":1200},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666335321,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666368089,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666400857,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $124.00 -
-
{"id":9724114796633,"title":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","handle":"trio-suction-cup-mounts-4-pack-for-mini-speedmount","description":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e","published_at":"2026-11-20T03:31:49+11:00","created_at":"2026-11-20T03:31:48+11:00","vendor":"TRIO Flatmount","type":"Mounts","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":45254,"price_min":45254,"price_max":45254,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908412227673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MAS-TR-00015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","public_title":null,"options":["Default Title"],"price":45254,"weight":400,"compare_at_price":null,"inventory_management":"shopify","barcode":"MAS-TR-00015","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","options":["Title"],"media":[{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666302553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","width":1200},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666335321,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666368089,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666400857,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $7.13 -
-
{"id":9724114796633,"title":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","handle":"trio-suction-cup-mounts-4-pack-for-mini-speedmount","description":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e","published_at":"2026-11-20T03:31:49+11:00","created_at":"2026-11-20T03:31:48+11:00","vendor":"TRIO Flatmount","type":"Mounts","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":45254,"price_min":45254,"price_max":45254,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908412227673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MAS-TR-00015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","public_title":null,"options":["Default Title"],"price":45254,"weight":400,"compare_at_price":null,"inventory_management":"shopify","barcode":"MAS-TR-00015","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","options":["Title"],"media":[{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666302553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","width":1200},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666335321,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666368089,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666400857,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $153.25 -
-
{"id":9724114796633,"title":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","handle":"trio-suction-cup-mounts-4-pack-for-mini-speedmount","description":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e","published_at":"2026-11-20T03:31:49+11:00","created_at":"2026-11-20T03:31:48+11:00","vendor":"TRIO Flatmount","type":"Mounts","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":45254,"price_min":45254,"price_max":45254,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908412227673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MAS-TR-00015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","public_title":null,"options":["Default Title"],"price":45254,"weight":400,"compare_at_price":null,"inventory_management":"shopify","barcode":"MAS-TR-00015","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","options":["Title"],"media":[{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666302553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/trio-suction-cups__57869.1726709578.png?v=1795105910","width":1200},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666335321,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H0d17ca17623e4c289c0fb9a432a28609A__04231.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666368089,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H8f20f990a79e47f4985533521e04c39fy__31312.1726709578.jpg?v=1795105909","width":800},{"alt":"TRIO Suction Cup Mounts (4 pack) for Mini Speedmount","id":41844666400857,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/H4050aeacded846d5af7470fc73dea6e8c__11999.1726709578.jpg?v=1795105909","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"\"\u003eSet of 4 suction cup mounts for use with the Mini Speedmounts.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDiameter: 11.43cm\u003cbr\u003eBolt Size: M6 female threads\u003cbr\u003eHolding Force: 30kg each\u003c\/p\u003e\n\u003cp class=\"\"\u003eWith one-year manufacturer’s warranty for assured reliability and peace of mind.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eSuction Cup Mount Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Mini Speedmount\u003c\/p\u003e\n\u003cp class=\"\"\u003e2. Thread the screws into the landing pads and tighten using the allen key supplied.\u003c\/p\u003e\n\u003cp class=\"\"\u003e3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.\u003c\/p\u003e\n\u003cp class=\"\"\u003e4. Place the TRIO Mini Speedmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE\/BOAT ETC.\u003c\/p\u003e\n\u003cp class=\"\"\u003e5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.\u003c\/p\u003e\n\u003cp class=\"\"\u003e6. Click the Starlink into the TRIO Speedmount and make sure it is secure… and enjoy your internet!\u003c\/p\u003e\n\u003cp class=\"\"\u003e** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $457.00



