Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome
CEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models. The G41 operates on...
See full specifications ↓Available to order online
- OnlineIn stock
- In-storeOut of stock
Orders are dispatched from Victoria.
Call 1300 003 978 to check availability.
- Genuine products with manufacturer warranty
- Free shipping on orders over $99
- Expert support: 1300 003 978 · Mon–Fri 9am–6pm
- Secure checkout
CEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.
The G41 operates on more frequency bands and can be easily switched between Telstra, Optus and Vodafone-TPG (one carrier at a time) should you change service provider.
CEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.
Expanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.
Key Features:
- 700L/850/900/1800/2100/2600 MHz (700 band not supported on Vodafone)
- 3G, 4G, VoLTE, NB-IoT (G41 has 5G capabilities, but is currently not enabled or approved)
- Carrier Switching using WAVE App between Telstra, Optus or Vodafone - one carrier at a time
- Up to 3000 m2 coverage area
- Two bands simultaneous relay
- Total System Relay Bandwidth - Up to 40 MHz
- Remote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)
- Ethernet Port for connection to internet source for live monitoring
Superior Signal Amplification
Boasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.
Easy Installation and Management
Setting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.
Comprehensive Coverage
Ideal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.
High-Performance Components
The CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.
Warranty and Support
This product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.
Pack Includes:
- Nextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)
- Ceiling Dome 698-4000MHz Panel Antenna -150dBc PIM
- Wideband LPDA 698-4000MHz
- PTL-240 10m + 6m Coaxial Cable N male to SMA Male
- 1m Ethernet cable
- 240v Power Supply
Warranty: 2 years
General
| Brand | Nextivity |
|---|---|
| Model / SKU | RPR-CF-00801 |
| Category | Home & Office Repeaters |
Warranty
Every product we sell is genuine and covered by the manufacturer's warranty.
Faulty item or warranty claim? Call 1300 003 978 (Mon–Fri 9am–6pm) or email info@tekcart.com.au.
Delivery
- Free shipping on orders over $99
- Orders are dispatched from Victoria
- Professional installation available in VIC, NSW & ACT — request a quote
Payment
Pay securely at checkout with:
All prices are in Australian dollars and include GST.
Frequently asked questions
Are your products genuine?
Yes. Every product we sell is genuine and covered by the manufacturer's warranty.
Can you install this for me?
Yes. Our technicians supply and install CCTV, alarm and networking systems across Victoria, New South Wales and the ACT. Request a quote.
How much is shipping?
Shipping is free on orders over $99. Orders are dispatched from Victoria. See our delivery information.
This item shows out of stock. What can I do?
Call us on 1300 003 978 to check availability, or leave your email under "Notify me" and we'll tell you when it's back.
Can I get help choosing the right product?
Yes. Call 1300 003 978 (Mon–Fri 9am–6pm) or email info@tekcart.com.au.




Need it installed?
Our technicians supply and install security and networking systems across VIC, NSW & ACT.
Request a quote → 1300 003 978Other Customers also buy:
-
-
{"id":9724101361753,"title":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","handle":"nextivity-cel-fi-go-g41-building-wideband-lpda-inc-ceiling-dome","description":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e","published_at":"2026-11-20T03:28:53+11:00","created_at":"2026-11-20T03:28:52+11:00","vendor":"Nextivity","type":"Home \u0026 Office Repeaters","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":261012,"price_min":261012,"price_max":261012,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908396564569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RPR-CF-00801","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","public_title":null,"options":["Default Title"],"price":261012,"weight":6000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","options":["Title"],"media":[{"alt":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","id":41844637663321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1150,"width":1150,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"},"aspect_ratio":1.0,"height":1150,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","width":1150}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $2,209.80 -
-
{"id":9724101361753,"title":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","handle":"nextivity-cel-fi-go-g41-building-wideband-lpda-inc-ceiling-dome","description":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e","published_at":"2026-11-20T03:28:53+11:00","created_at":"2026-11-20T03:28:52+11:00","vendor":"Nextivity","type":"Home \u0026 Office Repeaters","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":261012,"price_min":261012,"price_max":261012,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908396564569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RPR-CF-00801","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","public_title":null,"options":["Default Title"],"price":261012,"weight":6000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","options":["Title"],"media":[{"alt":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","id":41844637663321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1150,"width":1150,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"},"aspect_ratio":1.0,"height":1150,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","width":1150}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $1,931.16 -
-
{"id":9724101361753,"title":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","handle":"nextivity-cel-fi-go-g41-building-wideband-lpda-inc-ceiling-dome","description":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e","published_at":"2026-11-20T03:28:53+11:00","created_at":"2026-11-20T03:28:52+11:00","vendor":"Nextivity","type":"Home \u0026 Office Repeaters","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":261012,"price_min":261012,"price_max":261012,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908396564569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RPR-CF-00801","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","public_title":null,"options":["Default Title"],"price":261012,"weight":6000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","options":["Title"],"media":[{"alt":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","id":41844637663321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1150,"width":1150,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"},"aspect_ratio":1.0,"height":1150,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","width":1150}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $1,237.50 -
-
{"id":9724101361753,"title":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","handle":"nextivity-cel-fi-go-g41-building-wideband-lpda-inc-ceiling-dome","description":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e","published_at":"2026-11-20T03:28:53+11:00","created_at":"2026-11-20T03:28:52+11:00","vendor":"Nextivity","type":"Home \u0026 Office Repeaters","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":261012,"price_min":261012,"price_max":261012,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908396564569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RPR-CF-00801","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","public_title":null,"options":["Default Title"],"price":261012,"weight":6000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","options":["Title"],"media":[{"alt":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","id":41844637663321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1150,"width":1150,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"},"aspect_ratio":1.0,"height":1150,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","width":1150}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $1,373.63 -
-
{"id":9724101361753,"title":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","handle":"nextivity-cel-fi-go-g41-building-wideband-lpda-inc-ceiling-dome","description":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e","published_at":"2026-11-20T03:28:53+11:00","created_at":"2026-11-20T03:28:52+11:00","vendor":"Nextivity","type":"Home \u0026 Office Repeaters","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":261012,"price_min":261012,"price_max":261012,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908396564569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RPR-CF-00801","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","public_title":null,"options":["Default Title"],"price":261012,"weight":6000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","options":["Title"],"media":[{"alt":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","id":41844637663321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1150,"width":1150,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"},"aspect_ratio":1.0,"height":1150,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","width":1150}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $1,373.63 -
-
{"id":9724101361753,"title":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","handle":"nextivity-cel-fi-go-g41-building-wideband-lpda-inc-ceiling-dome","description":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e","published_at":"2026-11-20T03:28:53+11:00","created_at":"2026-11-20T03:28:52+11:00","vendor":"Nextivity","type":"Home \u0026 Office Repeaters","tags":["PowerTec","tk-sync","tk-sync-powertec"],"price":261012,"price_min":261012,"price_max":261012,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908396564569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RPR-CF-00801","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","public_title":null,"options":["Default Title"],"price":261012,"weight":6000,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","options":["Title"],"media":[{"alt":"Nextivity CEL-FI GO G41 Building Wideband LPDA inc. Ceiling Dome","id":41844637663321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1150,"width":1150,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734"},"aspect_ratio":1.0,"height":1150,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/RPR-CF-00801__88576.1725939169.jpg?v=1795105734","width":1150}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.\u003c\/p\u003e\n\u003cp\u003eThe G41 operates on more frequency bands and can be easily switched between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e and \u003cstrong\u003eVodafone-TPG\u003c\/strong\u003e (one carrier at a time) should you change service provider.\u003c\/p\u003e\n\u003cp\u003eCEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.\u003c\/p\u003e\n\u003cp\u003eExpanding on G32's dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e700L\/850\/900\/1800\/2100\/2600 MHz \u003cem\u003e(700 band not supported on Vodafone)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3G, 4G, VoLTE, NB-IoT \u003cem\u003e(G41 has 5G capabilities, but is currently not enabled or approved)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarrier Switching using WAVE App between \u003cstrong\u003eTelstra, Optus\u003c\/strong\u003e or\u003cstrong\u003e Vodafone \u003c\/strong\u003e- one carrier at a time\u003c\/li\u003e\n\u003cli\u003eUp to 3000 m2 coverage area\u003c\/li\u003e\n\u003cli\u003eTwo bands simultaneous relay\u003c\/li\u003e\n\u003cli\u003eTotal System Relay Bandwidth - Up to 40 MHz\u003c\/li\u003e\n\u003cli\u003eRemote Monitoring, Control and Alert Capabilities via WAVE Portal (for approved installers)\u003c\/li\u003e\n\u003cli\u003eEthernet Port for connection to internet source for live monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuperior Signal Amplification\u003c\/h3\u003e\n\u003cp\u003eBoasting up to 100 dB of signal gain, the CEL-FI GO G41 stands out with its impressive performance across a broad spectrum of frequencies. It supports an extensive range of bands including 1, 3, 5, 7, 8, 20, 28L, and 28U, ensuring compatibility with various network operators. The repeater’s capability to handle up to 40 MHz of relay bandwidth enhances signal strength and clarity, eliminating dead zones and providing consistent coverage even in large buildings.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Management\u003c\/h3\u003e\n\u003cp\u003eSetting up the CEL-FI GO G41 is straightforward thanks to its user-friendly design. The package includes a high-performance wideband LPDA antenna and ceiling dome, ensuring reliable signal reception and distribution. Additionally, the repeater comes with an RJ45 Ethernet port, facilitating remote monitoring and management via the Nextivity WAVE App and WAVE Portal. This feature allows users and approved installers to track performance and make adjustments from anywhere.\u003c\/p\u003e\n\u003ch3\u003eComprehensive Coverage\u003c\/h3\u003e\n\u003cp\u003eIdeal for use in diverse environments, the CEL-FI GO G41 covers up to 3000 square metres, making it suitable for large homes, offices, and commercial spaces. It supports two bands simultaneously, ensuring flexible and efficient signal relay. The inclusion of a ceiling dome antenna helps optimise indoor signal distribution, further enhancing the overall coverage and reliability of the network.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Components\u003c\/h3\u003e\n\u003cp\u003eThe CEL-FI GO G41 package includes all essential components for effective signal boosting. This includes the Nextivity CEL-FI GO G41 unit, a wideband LPDA antenna, a ceiling dome antenna, and necessary cables and power supply. Each component is selected to maximise performance, ensuring that you receive the best possible signal enhancement and coverage.\u003c\/p\u003e\n\u003ch3\u003eWarranty and Support\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a 24-month manufacturer’s warranty, providing peace of mind and support in case of any issues. Nextivity’s commitment to quality and customer service ensures that you can rely on the CEL-FI GO G41 for continuous and dependable performance, backed by expert support if needed.\u003c\/p\u003e\n\u003ch3\u003ePack Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNextivity CEL-FI GO G41-JE - Switchable between Telstra, Optus and Vodafone-TPG (one carrier at a time)\u003c\/li\u003e\n\u003cli\u003eCeiling Dome 698-4000MHz Panel Antenna -150dBc PIM\u003c\/li\u003e\n\u003cli\u003eWideband LPDA 698-4000MHz\u003c\/li\u003e\n\u003cli\u003ePTL-240 10m + 6m Coaxial Cable N male to SMA Male\u003c\/li\u003e\n\u003cli\u003e1m Ethernet cable\u003c\/li\u003e\n\u003cli\u003e240v Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/nextivityinc.com\/wp-content\/uploads\/2021\/06\/GOG41_datasheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 years\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $1,373.63
