Alloy POE200SC.20 10/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km
Alloy POE200SC.20 PoE PSE Fast Ethernet Media Converter The POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices...
See full specifications ↓Available to order online
- OnlineLow stock
- In-storeOut of stock
Orders are dispatched from Victoria.
Call 1300 003 978 to check availability.
- Genuine products with manufacturer warranty
- Fast delivery – dispatched from VIC
- Expert support: 1300 003 978 · Mon–Fri 9am–6pm
- Secure checkout
Alloy POE200SC.20 PoE PSE Fast Ethernet Media Converter
The POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.
The PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable / disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.
Features
Power PoE PD devices such as IP Phones, IP Cameras over UTP data cable
IEEE 802.3af PoE (Power over Ethernet) PSE compliant
Comprehensive PoE functions: PD Signature Sensing, power monitoring and current protection
Supports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion
10/100Mbps auto-negotiation on RJ-45 copper port
Maximum fibre link ranges: 40kms
LC, SC and ST fibre port connector models
Far-End-Fault and
Warranty: 36 months
General
| Brand | Alloy |
|---|---|
| Model / SKU | NHA-POE200SC.20 |
| Category | Media Converters |
Warranty
Every product we sell is genuine and covered by the manufacturer's warranty.
Faulty item or warranty claim? Call 1300 003 978 (Mon–Fri 9am–6pm) or email info@tekcart.com.au.
Delivery
- Fast delivery Australia-wide
- Orders are dispatched from Victoria
- Professional installation available in VIC, NSW & ACT — request a quote
Payment
Pay securely at checkout with:
All prices are in Australian dollars and include GST.
Frequently asked questions
Are your products genuine?
Yes. Every product we sell is genuine and covered by the manufacturer's warranty.
Can you install this for me?
Yes. Our certified installation partners supply and install CCTV, alarm and networking systems across Victoria, New South Wales and the ACT. Request a quote.
How much is shipping?
Shipping is calculated at checkout. Orders are dispatched quickly from Victoria. See our delivery information.
This item shows out of stock. What can I do?
Call us on 1300 003 978 to check availability, or leave your email under "Notify me" and we'll tell you when it's back.
Can I get help choosing the right product?
Yes. Call 1300 003 978 (Mon–Fri 9am–6pm) or email info@tekcart.com.au.




Need it installed?
Our technicians supply and install security and networking systems across VIC, NSW & ACT.
Request a quote → 1300 003 978Other Customers also buy:
-
-
{"id":9724186001497,"title":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","handle":"alloy-poe200sc-20-10-100base-tx-to-100base-fx-single-mode-fibre-sc-converter-provides-poe-power-rj-45-20km","description":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e","published_at":"2026-11-20T03:47:31+11:00","created_at":"2026-11-20T03:47:30+11:00","vendor":"Alloy","type":"Media Converters","tags":["Leader","tk-sync","tk-sync-leader"],"price":48400,"price_min":48400,"price_max":48400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908496080985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NHA-POE200SC.20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","public_title":null,"options":["Default Title"],"price":48400,"weight":1240,"compare_at_price":null,"inventory_management":"shopify","barcode":"NHA-POE200SC.20","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","options":["Title"],"media":[{"alt":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","id":41844775714905,"position":1,"preview_image":{"aspect_ratio":1.795,"height":557,"width":1000,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"},"aspect_ratio":1.795,"height":557,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $782.89 -
Translation missing: en.products.product.regular_price $166.32 Sold Out
-
-
{"id":9724186001497,"title":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","handle":"alloy-poe200sc-20-10-100base-tx-to-100base-fx-single-mode-fibre-sc-converter-provides-poe-power-rj-45-20km","description":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e","published_at":"2026-11-20T03:47:31+11:00","created_at":"2026-11-20T03:47:30+11:00","vendor":"Alloy","type":"Media Converters","tags":["Leader","tk-sync","tk-sync-leader"],"price":48400,"price_min":48400,"price_max":48400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908496080985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NHA-POE200SC.20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","public_title":null,"options":["Default Title"],"price":48400,"weight":1240,"compare_at_price":null,"inventory_management":"shopify","barcode":"NHA-POE200SC.20","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","options":["Title"],"media":[{"alt":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","id":41844775714905,"position":1,"preview_image":{"aspect_ratio":1.795,"height":557,"width":1000,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"},"aspect_ratio":1.795,"height":557,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $45.00 -
-
{"id":9724186001497,"title":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","handle":"alloy-poe200sc-20-10-100base-tx-to-100base-fx-single-mode-fibre-sc-converter-provides-poe-power-rj-45-20km","description":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e","published_at":"2026-11-20T03:47:31+11:00","created_at":"2026-11-20T03:47:30+11:00","vendor":"Alloy","type":"Media Converters","tags":["Leader","tk-sync","tk-sync-leader"],"price":48400,"price_min":48400,"price_max":48400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908496080985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NHA-POE200SC.20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","public_title":null,"options":["Default Title"],"price":48400,"weight":1240,"compare_at_price":null,"inventory_management":"shopify","barcode":"NHA-POE200SC.20","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","options":["Title"],"media":[{"alt":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","id":41844775714905,"position":1,"preview_image":{"aspect_ratio":1.795,"height":557,"width":1000,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"},"aspect_ratio":1.795,"height":557,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $129.00 -
-
{"id":9724186001497,"title":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","handle":"alloy-poe200sc-20-10-100base-tx-to-100base-fx-single-mode-fibre-sc-converter-provides-poe-power-rj-45-20km","description":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e","published_at":"2026-11-20T03:47:31+11:00","created_at":"2026-11-20T03:47:30+11:00","vendor":"Alloy","type":"Media Converters","tags":["Leader","tk-sync","tk-sync-leader"],"price":48400,"price_min":48400,"price_max":48400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908496080985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NHA-POE200SC.20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","public_title":null,"options":["Default Title"],"price":48400,"weight":1240,"compare_at_price":null,"inventory_management":"shopify","barcode":"NHA-POE200SC.20","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","options":["Title"],"media":[{"alt":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","id":41844775714905,"position":1,"preview_image":{"aspect_ratio":1.795,"height":557,"width":1000,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"},"aspect_ratio":1.795,"height":557,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $219.00 -
-
{"id":9724186001497,"title":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","handle":"alloy-poe200sc-20-10-100base-tx-to-100base-fx-single-mode-fibre-sc-converter-provides-poe-power-rj-45-20km","description":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e","published_at":"2026-11-20T03:47:31+11:00","created_at":"2026-11-20T03:47:30+11:00","vendor":"Alloy","type":"Media Converters","tags":["Leader","tk-sync","tk-sync-leader"],"price":48400,"price_min":48400,"price_max":48400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908496080985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NHA-POE200SC.20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","public_title":null,"options":["Default Title"],"price":48400,"weight":1240,"compare_at_price":null,"inventory_management":"shopify","barcode":"NHA-POE200SC.20","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","options":["Title"],"media":[{"alt":"Alloy POE200SC.20 10\/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, provides PoE power (RJ-45). 20km","id":41844775714905,"position":1,"preview_image":{"aspect_ratio":1.795,"height":557,"width":1000,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852"},"aspect_ratio":1.795,"height":557,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/NHA-POE200SC.20.jpg?v=1795106852","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAlloy POE200SC.20 PoE PSE Fast Ethernet Media Converter\u003c\/p\u003e\u003cp\u003eThe POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10\/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.\u003c\/p\u003e\u003cp\u003eThe PoE capability of POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable \/ disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults. POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.\u003c\/p\u003e\u003cp\u003eFeatures\u003cbr\u003ePower PoE PD devices such as IP Phones, IP Cameras over UTP data cable\u003cbr\u003eIEEE 802.3af PoE (Power over Ethernet) PSE compliant\u003cbr\u003eComprehensive PoE functions: PD Signature Sensing, power monitoring and current protection\u003cbr\u003eSupports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion\u003cbr\u003e10\/100Mbps auto-negotiation on RJ-45 copper port\u003cbr\u003eMaximum fibre link ranges: 40kms\u003cbr\u003eLC, SC and ST fibre port connector models\u003cbr\u003eFar-End-Fault and\u003c\/p\u003e\n\u003cp\u003eWarranty: 36 months\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price $772.20
