Security & CCTV
Professional CCTV cameras, NVRs, alarm systems and intercoms from Dahua, Hikvision, HiLook, TP-Link VIGI, Bosch, Hills Reliance and Ajax. Professional installation available in VIC & NSW →
- Housing material: Stainless Steel SUS201
- Inner-shell material: SGCC
- Working temperature: -30 degree to +70 degree
- Working humidity: 10% to 90%
- Dimension (L x W x H) 212 mm x 115 mm x80 mm
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
- Housing material: Stainless Steel SUS201
- Inner-shell material: SGCC
- Working temperature: -30 degree to +70 degree
- Working humidity: 10% to 90%
- Dimension (L x W x H) 212 mm x 115 mm x80 mm
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K2M060 Hikvision Secure Door Control Unit is the interlayer between the access control terminal and the lock, including the door magnetic, the lock, the exit button and so on. It can be applied to keep the door closed when the door is damaged.
Features
- Communicates with the access control terminal via RS-485 to execute the commands from the terminal including open door, close door, normally open and normally closed
- Collects the door magnetic signal, the exit button signal and the tamper-proof signal and send them to the access control terminal
- Supports tampering Alarm
- Supports RS-485 communication indicators to show the communication status
- 4-ch DIP switch supporting ID NO. configuration
- Supports a Wiegand interface to connect a Wiegand card reader to enter/exist access control terminal by swiping card
-
DS-K2M060 Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K2M060 Hikvision Secure Door Control Unit is the interlayer between the access control terminal and the lock, including the door magnetic, the lock, the exit button and so on. It can be applied to keep the door closed when the door is damaged.
Features
- Communicates with the access control terminal via RS-485 to execute the commands from the terminal including open door, close door, normally open and normally closed
- Collects the door magnetic signal, the exit button signal and the tamper-proof signal and send them to the access control terminal
- Supports tampering Alarm
- Supports RS-485 communication indicators to show the communication status
- 4-ch DIP switch supporting ID NO. configuration
- Supports a Wiegand interface to connect a Wiegand card reader to enter/exist access control terminal by swiping card
-
DS-K2M060 Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
HIKVISION, 4 Door TCP/IP Network access controller, Up to 10,000 users, 26, 34 Bit Wiegand input, 4x relay outputs, 4x Wiegand inputs, 50,000 User event log, works with iVMS-4200, 12V DC
Key Features
- 32-bit high-speed processor
- TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure information security
- Supports Wiegand interface for accessing card reader. Wiegand interface supports W26/ W34 and is seamlessly compatible with third-party card reader
- Massive storage with 10, 000 cards information and 50,000 card swiping records
- Supports first card function, super card and super password function, online upgrade function and online remote control of the doors
- Supports various card types such as normal/ disabled/blacklist/patrol/visitor/duress/ super card, etc.
- Supports tamper-proof alarm for card reader, unsecured door alarm, forced entry door alarm, alarm for door opening timeout, duress alarm, and alarm for invalid card swiping attempts alarm, case in alarm and restore, insufficient storage alarm for offline event, network break alarm
- The recognition and storage of card number with maximum 20 digits
- Supports online and offline operating mode
- Supports time synchronization via NTP, manual or automatic method
- Watchdog for device running status detection
- Data can be permanently saved when the access controller is powered off
- Client supports attendance function
- High/low temperature resistant design(-20°C to + 65°C)
Programmed and managed by either iVMS4200 Software or HikCentral
- DS-K2804 Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
HIKVISION, 4 Door TCP/IP Network access controller, Up to 10,000 users, 26, 34 Bit Wiegand input, 4x relay outputs, 4x Wiegand inputs, 50,000 User event log, works with iVMS-4200, 12V DC
Key Features
- 32-bit high-speed processor
- TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure information security
- Supports Wiegand interface for accessing card reader. Wiegand interface supports W26/ W34 and is seamlessly compatible with third-party card reader
- Massive storage with 10, 000 cards information and 50,000 card swiping records
- Supports first card function, super card and super password function, online upgrade function and online remote control of the doors
- Supports various card types such as normal/ disabled/blacklist/patrol/visitor/duress/ super card, etc.
- Supports tamper-proof alarm for card reader, unsecured door alarm, forced entry door alarm, alarm for door opening timeout, duress alarm, and alarm for invalid card swiping attempts alarm, case in alarm and restore, insufficient storage alarm for offline event, network break alarm
- The recognition and storage of card number with maximum 20 digits
- Supports online and offline operating mode
- Supports time synchronization via NTP, manual or automatic method
- Watchdog for device running status detection
- Data can be permanently saved when the access controller is powered off
- Client supports attendance function
- High/low temperature resistant design(-20°C to + 65°C)
Programmed and managed by either iVMS4200 Software or HikCentral
- DS-K2804 Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Access Controller
- Supports 8-door control. It is formed by 2 DS-K2M002X access modules, and one 4-doors access controller
- Access controller: downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Access Module: supports 8-ch RS-485 interface for card reader connecting
- Web configuration management. All configurations can be realized via web without software application
- Supports professional access control applications such as multi-door interlocking and anti-passback
- Supports backup battery access. Charging and discharging are available
- It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection
- Datasheet
System Parameters
Operating System
- Linux
Network
- Wired Network: 1, 10/100/1000 Mbps self-adaptive
Interface
- Network Interface: 1
-
Lock Control: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
-
Exit Button: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
-
Door Contact Input: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
-
Alarm Input: 16 (8 on access controller, 8 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
-
Alarm Output: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
- Tamper: 1
-
RS-485: 15 (7 on access controller, 8 on access modules)
-
Access Controller:
- 2 for card readers
- 5 for access modules (4 for communication, each interface can connect up to 16 access modules; 1 for redundancy)
-
Access Modules:
- 4 for card readers
- 4 for access controller
-
Access Controller:
-
Wiegand: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
- USB: 1 (USB 2.0)
- Fire Interface: 1
Capacity
- User Capacity: 100,000
- Fingerprint Capacity: 10,000
- Card Capacity: 200,000
- Event Capacity: 600,000
- Linked Door Capacity: 8 (4 on access controller, 4 on access modules)
-
Linked Card Reader Capacity:
- 16 RS-485 card readers (OSDP protocol):
- 8 on access controller
- 8 on access modules (4 for each)
- 8 Wiegand card readers:
- 4 on access controller
- 4 on access modules
- 16 RS-485 card readers (OSDP protocol):
Authentication
- Fingerprint Recognition Duration: ＜ 1 s
General
-
Indicator:
-
DS-K2704X(P): 12 indicators
- 1 for power status
- 1 for running status
- 1 for wired network status
- 5 for RS-485 status
- 4 for door status
-
DS-K2M002X: 6 indicators
- 1 for power status
- 1 for running status
- 2 for RS-485 status
- 2 for door status
-
DS-K2704X(P): 12 indicators
- Battery: Charge and discharge
- Power Supply: 100 VAC to 240 VAC
- Power Consumption: ≤ 200 W
- Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity: 0% to 90% (Non-condensing)
- Installation: Wall mounting
Language Support
- English, Thai, Traditional Chinese, Indonesian, Vietnamese, Arabic, Spanish (Europe), Spanish (South America), Italian, French, Dutch, Russian, Ukrainian, Portuguese (Europe), Portuguese (Brazil), Serbian, Croatian, Bulgarian, German, Greek, Romanian
Functionality
- Configuration via Web Browser: Supported
- Multi-Factor Authentication: Supported
- First Person In: Supported
- Anti-Passback: Supported (32 routes, 64 card readers each)
- Multi-Door Interlocking: Supported (32 groups, 32 doors each)
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Access Controller
- Supports 8-door control. It is formed by 2 DS-K2M002X access modules, and one 4-doors access controller
- Access controller: downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus. Access Module: supports 8-ch RS-485 interface for card reader connecting
- Web configuration management. All configurations can be realized via web without software application
- Supports professional access control applications such as multi-door interlocking and anti-passback
- Supports backup battery access. Charging and discharging are available
- It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection
- Datasheet
System Parameters
Operating System
- Linux
Network
- Wired Network: 1, 10/100/1000 Mbps self-adaptive
Interface
- Network Interface: 1
-
Lock Control: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
-
Exit Button: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
-
Door Contact Input: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
-
Alarm Input: 16 (8 on access controller, 8 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
-
Alarm Output: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
- Tamper: 1
-
RS-485: 15 (7 on access controller, 8 on access modules)
-
Access Controller:
- 2 for card readers
- 5 for access modules (4 for communication, each interface can connect up to 16 access modules; 1 for redundancy)
-
Access Modules:
- 4 for card readers
- 4 for access controller
-
Access Controller:
-
Wiegand: 8 (4 on access controller, 4 on access modules)
- Note: The cabinet contains 1 DS-K2704X(P) access controller and 2 DS-K2M002X access modules.
- USB: 1 (USB 2.0)
- Fire Interface: 1
Capacity
- User Capacity: 100,000
- Fingerprint Capacity: 10,000
- Card Capacity: 200,000
- Event Capacity: 600,000
- Linked Door Capacity: 8 (4 on access controller, 4 on access modules)
-
Linked Card Reader Capacity:
- 16 RS-485 card readers (OSDP protocol):
- 8 on access controller
- 8 on access modules (4 for each)
- 8 Wiegand card readers:
- 4 on access controller
- 4 on access modules
- 16 RS-485 card readers (OSDP protocol):
Authentication
- Fingerprint Recognition Duration: ＜ 1 s
General
-
Indicator:
-
DS-K2704X(P): 12 indicators
- 1 for power status
- 1 for running status
- 1 for wired network status
- 5 for RS-485 status
- 4 for door status
-
DS-K2M002X: 6 indicators
- 1 for power status
- 1 for running status
- 2 for RS-485 status
- 2 for door status
-
DS-K2704X(P): 12 indicators
- Battery: Charge and discharge
- Power Supply: 100 VAC to 240 VAC
- Power Consumption: ≤ 200 W
- Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity: 0% to 90% (Non-condensing)
- Installation: Wall mounting
Language Support
- English, Thai, Traditional Chinese, Indonesian, Vietnamese, Arabic, Spanish (Europe), Spanish (South America), Italian, French, Dutch, Russian, Ukrainian, Portuguese (Europe), Portuguese (Brazil), Serbian, Croatian, Bulgarian, German, Greek, Romanian
Functionality
- Configuration via Web Browser: Supported
- Multi-Factor Authentication: Supported
- First Person In: Supported
- Anti-Passback: Supported (32 routes, 64 card readers each)
- Multi-Door Interlocking: Supported (32 groups, 32 doors each)
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Access Controller
- Supports 4 door control. It can extend up to 62 DS-K2M002X access modules, and up to 128 doors can be controlled
- Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus.
- Web configuration management. All configurations can be realized via web without software application
- Supports professional access control applications such as multi-door interlocking and anti-passback
- Supports backup battery access. Charging and discharging are available
- It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection
- Datasheet
System Parameters
Network
- Wired Network: 1, 10/100/1000 Mbps self-adaptive
Interface
- Network Interface: 1
- Lock Control: 4
- Exit Button: 4
- Door Contact Input: 4
- Alarm Input: 8
- Alarm Output: 4
- Tamper: 1
-
RS-485: 7
- 2 for card reader
- 5 for access modules (4 for communication, each interface can connect up to 16 access modules; 1 for redundancy)
- Wiegand: 4 (standard 26/34 input, supports custom Wiegand settings)
- USB: 1 (USB 2.0)
- Fire Interface: 1
Capacity
- User Capacity: 100,000
- Fingerprint Capacity: 10,000
- Card Capacity: 200,000
- Event Capacity: 600,000
-
Linked Door Capacity:
- Self: 4 doors
- Extended: Up to 128 doors (connected with 62 access modules)
-
Linked Card Reader Capacity:
- 8 RS-485 card readers (OSDP protocol)
- 4 Wiegand card readers
Authentication
- Fingerprint Recognition Duration: ＜ 1 s
General
-
Indicator: 12 indicators
- 1 for power status
- 1 for running status
- 1 for wired network status
- 5 for RS-485 status
- 4 for door status
- Battery: Charge and discharge
- Power Supply: 12 ± 15% VDC
- Power Consumption: ≤ 102 W
- Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity: 0% to 90% (Non-condensing)
- Installation: Installation with guide rail
Language Support
- English, Thai, Traditional Chinese, Indonesian, Vietnamese, Arabic, Spanish (Europe), Spanish (South America), Italian, French, Dutch, Russian, Ukrainian, Portuguese (Europe), Portuguese (Brazil), Serbian, Croatian, Bulgarian, German, Greek, Romanian
Functionality
- Configuration via Web Browser: Supported
- Multi-Factor Authentication: Supported
- First Person In: Supported
- Anti-Passback: Supported (32 routes, 64 card readers each)
- Multi-Door Interlocking: Supported (32 groups, 32 doors each)
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Access Controller
- Supports 4 door control. It can extend up to 62 DS-K2M002X access modules, and up to 128 doors can be controlled
- Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus.
- Web configuration management. All configurations can be realized via web without software application
- Supports professional access control applications such as multi-door interlocking and anti-passback
- Supports backup battery access. Charging and discharging are available
- It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection
- Datasheet
System Parameters
Network
- Wired Network: 1, 10/100/1000 Mbps self-adaptive
Interface
- Network Interface: 1
- Lock Control: 4
- Exit Button: 4
- Door Contact Input: 4
- Alarm Input: 8
- Alarm Output: 4
- Tamper: 1
-
RS-485: 7
- 2 for card reader
- 5 for access modules (4 for communication, each interface can connect up to 16 access modules; 1 for redundancy)
- Wiegand: 4 (standard 26/34 input, supports custom Wiegand settings)
- USB: 1 (USB 2.0)
- Fire Interface: 1
Capacity
- User Capacity: 100,000
- Fingerprint Capacity: 10,000
- Card Capacity: 200,000
- Event Capacity: 600,000
-
Linked Door Capacity:
- Self: 4 doors
- Extended: Up to 128 doors (connected with 62 access modules)
-
Linked Card Reader Capacity:
- 8 RS-485 card readers (OSDP protocol)
- 4 Wiegand card readers
Authentication
- Fingerprint Recognition Duration: ＜ 1 s
General
-
Indicator: 12 indicators
- 1 for power status
- 1 for running status
- 1 for wired network status
- 5 for RS-485 status
- 4 for door status
- Battery: Charge and discharge
- Power Supply: 12 ± 15% VDC
- Power Consumption: ≤ 102 W
- Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity: 0% to 90% (Non-condensing)
- Installation: Installation with guide rail
Language Support
- English, Thai, Traditional Chinese, Indonesian, Vietnamese, Arabic, Spanish (Europe), Spanish (South America), Italian, French, Dutch, Russian, Ukrainian, Portuguese (Europe), Portuguese (Brazil), Serbian, Croatian, Bulgarian, German, Greek, Romanian
Functionality
- Configuration via Web Browser: Supported
- Multi-Factor Authentication: Supported
- First Person In: Supported
- Anti-Passback: Supported (32 routes, 64 card readers each)
- Multi-Door Interlocking: Supported (32 groups, 32 doors each)
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Access Controller
- Supports 2 door control. It can extend up to 62 DS-K2M002X access modules, and up to 126 doors can be controlled
- Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus.
- Web configuration management. All configurations can be realized via web without software application
- Supports professional access control applications such as multi-door interlocking and anti-passback
- Supports backup battery access. Charging and discharging are available
- It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection
- Datasheet
System Parameters
Operating System
- Linux
Network
- Wired Network: 1, 10/100/1000 Mbps self-adaptive
Interface
- Network Interface: 1
- Lock Control: 2
- Exit Button: 2
- Door Contact Input: 2
- Alarm Input: 4
- Alarm Output: 4
- Tamper: 1
-
RS-485: 7
- 2 for card reader
- 5 for access modules (4 for communication, each interface can connect up to 16 access modules; 1 for redundancy)
- Wiegand: 4 (standard 26/34 input, supports custom Wiegand settings)
- USB: 1 (USB 2.0)
- Fire Interface: 1
Capacity
- User Capacity: 100,000
- Fingerprint Capacity: 10,000
- Card Capacity: 200,000
- Event Capacity: 600,000
-
Linked Door Capacity:
- Self: 2 doors
- Extended: Up to 126 doors (connected with 62 access modules)
-
Linked Card Reader Capacity:
- 4 RS-485 card readers (OSDP protocol)
- 4 Wiegand card readers
Authentication
- Fingerprint Recognition Duration: ＜ 1 s
General
-
Indicator: 10 indicators
- 1 for power status
- 1 for running status
- 1 for wired network status
- 5 for RS-485 status
- 2 for door status
- Power Supply: 100 VAC to 240 VAC
- Battery: Charge and discharge
- Power Consumption: ≤ 72 W
- Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity: 0% to 90% (Non-condensing)
- Installation: Wall mounting
Language Support
- English, Thai, Traditional Chinese, Indonesian, Vietnamese, Arabic, Spanish (Europe), Spanish (South America), Italian, French, Dutch, Russian, Ukrainian, Portuguese (Europe), Portuguese (Brazil), Serbian, Croatian, Bulgarian, German, Greek, Romanian
Functionality
- Configuration via Web Browser: Supported
- Multi-Factor Authentication: Supported
- First Person In: Supported
- Anti-Passback: Supported (32 routes, 64 card readers each)
- Multi-Door Interlocking: Supported (32 groups, 32 doors each)
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Access Controller
- Supports 2 door control. It can extend up to 62 DS-K2M002X access modules, and up to 126 doors can be controlled
- Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus.
- Web configuration management. All configurations can be realized via web without software application
- Supports professional access control applications such as multi-door interlocking and anti-passback
- Supports backup battery access. Charging and discharging are available
- It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection
- Datasheet
System Parameters
Operating System
- Linux
Network
- Wired Network: 1, 10/100/1000 Mbps self-adaptive
Interface
- Network Interface: 1
- Lock Control: 2
- Exit Button: 2
- Door Contact Input: 2
- Alarm Input: 4
- Alarm Output: 4
- Tamper: 1
-
RS-485: 7
- 2 for card reader
- 5 for access modules (4 for communication, each interface can connect up to 16 access modules; 1 for redundancy)
- Wiegand: 4 (standard 26/34 input, supports custom Wiegand settings)
- USB: 1 (USB 2.0)
- Fire Interface: 1
Capacity
- User Capacity: 100,000
- Fingerprint Capacity: 10,000
- Card Capacity: 200,000
- Event Capacity: 600,000
-
Linked Door Capacity:
- Self: 2 doors
- Extended: Up to 126 doors (connected with 62 access modules)
-
Linked Card Reader Capacity:
- 4 RS-485 card readers (OSDP protocol)
- 4 Wiegand card readers
Authentication
- Fingerprint Recognition Duration: ＜ 1 s
General
-
Indicator: 10 indicators
- 1 for power status
- 1 for running status
- 1 for wired network status
- 5 for RS-485 status
- 2 for door status
- Power Supply: 100 VAC to 240 VAC
- Battery: Charge and discharge
- Power Consumption: ≤ 72 W
- Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity: 0% to 90% (Non-condensing)
- Installation: Wall mounting
Language Support
- English, Thai, Traditional Chinese, Indonesian, Vietnamese, Arabic, Spanish (Europe), Spanish (South America), Italian, French, Dutch, Russian, Ukrainian, Portuguese (Europe), Portuguese (Brazil), Serbian, Croatian, Bulgarian, German, Greek, Romanian
Functionality
- Configuration via Web Browser: Supported
- Multi-Factor Authentication: Supported
- First Person In: Supported
- Anti-Passback: Supported (32 routes, 64 card readers each)
- Multi-Door Interlocking: Supported (32 groups, 32 doors each)
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Access Controller
- Supports 2 door control. It can extend up to 62 DS-K2M002X access modules, and up to 126 doors can be controlled
- Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus.
- Web configuration management. All configurations can be realized via web without software application
- Supports professional access control applications such as multi-door interlocking and anti-passback
- Supports backup battery access. Charging and discharging are available
- It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection
- Datasheet
System Parameters
Operating System
- Linux
Network
- Wired Network: 1, 10/100/1000 Mbps self-adaptive
Interface
- Network Interface: 1
- Lock Control: 2
- Exit Button: 2
- Door Contact Input: 2
- Alarm Input: 4
- Alarm Output: 4
- Tamper: 1
-
RS-485: 7
- 2 for card reader
- 5 for access modules (4 for communication, each interface can connect up to 16 access modules; 1 for redundancy)
- Wiegand: 4 (standard 26/34 input, supports custom Wiegand settings)
- USB: 1 (USB 2.0)
- Fire Interface: 1
Capacity
- User Capacity: 100,000
- Fingerprint Capacity: 10,000
- Card Capacity: 200,000
- Event Capacity: 600,000
-
Linked Door Capacity:
- Self: 2 doors
- Extended: Up to 126 doors (connected with 62 access modules)
-
Linked Card Reader Capacity:
- 4 RS-485 card readers (OSDP protocol)
- 4 Wiegand card readers
Authentication
- Fingerprint Recognition Duration: ＜ 1 s
General
-
Indicator: 10 indicators
- 1 for power status
- 1 for running status
- 1 for wired network status
- 5 for RS-485 status
- 2 for door status
- Power Supply: 100 VAC to 240 VAC
- Battery: Charge and discharge
- Power Consumption: ≤ 72 W
- Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity: 0% to 90% (Non-condensing)
- Installation: Wall mounting
Language Support
- English, Thai, Traditional Chinese, Indonesian, Vietnamese, Arabic, Spanish (Europe), Spanish (South America), Italian, French, Dutch, Russian, Ukrainian, Portuguese (Europe), Portuguese (Brazil), Serbian, Croatian, Bulgarian, German, Greek, Romanian
Functionality
- Configuration via Web Browser: Supported
- Multi-Factor Authentication: Supported
- First Person In: Supported
- Anti-Passback: Supported (32 routes, 64 card readers each)
- Multi-Door Interlocking: Supported (32 groups, 32 doors each)
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Access Controller
- Supports 2 door control. It can extend up to 62 DS-K2M002X access modules, and up to 126 doors can be controlled
- Downstream RS-485 redundancy wiring design to ensure communication stability. 5-ch downlink RS-485 interface supports two applications: 1. When 4-ch RS-485 communication, the 5th RS-485 can be used as a redundant application; 2. 4-ch RS-485 forms 2 groups of dual-bus loops with physical isolation. It is recommended that you do not have more than 16 access modules attached to each loop bus.
- Web configuration management. All configurations can be realized via web without software application
- Supports professional access control applications such as multi-door interlocking and anti-passback
- Supports backup battery access. Charging and discharging are available
- It has status indicators such as power supply, communication and operation, which is convenient for equipment health detection
- Datasheet
System Parameters
Operating System
- Linux
Network
- Wired Network: 1, 10/100/1000 Mbps self-adaptive
Interface
- Network Interface: 1
- Lock Control: 2
- Exit Button: 2
- Door Contact Input: 2
- Alarm Input: 4
- Alarm Output: 4
- Tamper: 1
-
RS-485: 7
- 2 for card reader
- 5 for access modules (4 for communication, each interface can connect up to 16 access modules; 1 for redundancy)
- Wiegand: 4 (standard 26/34 input, supports custom Wiegand settings)
- USB: 1 (USB 2.0)
- Fire Interface: 1
Capacity
- User Capacity: 100,000
- Fingerprint Capacity: 10,000
- Card Capacity: 200,000
- Event Capacity: 600,000
-
Linked Door Capacity:
- Self: 2 doors
- Extended: Up to 126 doors (connected with 62 access modules)
-
Linked Card Reader Capacity:
- 4 RS-485 card readers (OSDP protocol)
- 4 Wiegand card readers
Authentication
- Fingerprint Recognition Duration: ＜ 1 s
General
-
Indicator: 10 indicators
- 1 for power status
- 1 for running status
- 1 for wired network status
- 5 for RS-485 status
- 2 for door status
- Power Supply: 100 VAC to 240 VAC
- Battery: Charge and discharge
- Power Consumption: ≤ 72 W
- Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity: 0% to 90% (Non-condensing)
- Installation: Wall mounting
Language Support
- English, Thai, Traditional Chinese, Indonesian, Vietnamese, Arabic, Spanish (Europe), Spanish (South America), Italian, French, Dutch, Russian, Ukrainian, Portuguese (Europe), Portuguese (Brazil), Serbian, Croatian, Bulgarian, German, Greek, Romanian
Functionality
- Configuration via Web Browser: Supported
- Multi-Factor Authentication: Supported
- First Person In: Supported
- Anti-Passback: Supported (32 routes, 64 card readers each)
- Multi-Door Interlocking: Supported (32 groups, 32 doors each)
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K2600 series access controller is designed with latest structure with TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of system. The controller also supports offline operation and is supplied in a locakable tampered housing complete with 6 Amp Power supply. battery not included.
Supports both 4 x Wiegand Card Readers (26 and 34 Bit) as well as 4 x RS485 encrypted Card Readers.
- 32-bit high-speed processor
- TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure information security
- The recognition and storage of card number with maximum 20 digits
- Massive storage with 100,000 cards information and 300,000
- Supports multi-door interlocking function (DS-K2604-G), anti-passback function, multi-card function, first card function, super card and super password function
- Online upgrade function and online remote control of the doors
- Supports alarm event upload (including tamper-proof alarm, unsecured door alarm, forced entry alarm, delayed door alarm,duress card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm)
- Short circuit attempts alarm and open circuit attempts alarm
- Supports zone alarm input
- Supports RS485 interface and Wiegand interface for accessing card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-party card reader with Wiegand interface
- Supports various card types such as normal/ disabled/ blacklist/ patrol/ guest/ duress/ super card, etc.
- Various indicators to show different device status
- Supports time synchronization via NTP, manual or automatic method
- Supports standby battery
Programmed and managed by either iVMS4200 Software or HikCentral
- DS-K2604-G Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K2600 series access controller is designed with latest structure with TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of system. The controller also supports offline operation and is supplied in a locakable tampered housing complete with 6 Amp Power supply. battery not included.
Supports both 4 x Wiegand Card Readers (26 and 34 Bit) as well as 4 x RS485 encrypted Card Readers.
- 32-bit high-speed processor
- TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure information security
- The recognition and storage of card number with maximum 20 digits
- Massive storage with 100,000 cards information and 300,000
- Supports multi-door interlocking function (DS-K2604-G), anti-passback function, multi-card function, first card function, super card and super password function
- Online upgrade function and online remote control of the doors
- Supports alarm event upload (including tamper-proof alarm, unsecured door alarm, forced entry alarm, delayed door alarm,duress card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm)
- Short circuit attempts alarm and open circuit attempts alarm
- Supports zone alarm input
- Supports RS485 interface and Wiegand interface for accessing card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-party card reader with Wiegand interface
- Supports various card types such as normal/ disabled/ blacklist/ patrol/ guest/ duress/ super card, etc.
- Various indicators to show different device status
- Supports time synchronization via NTP, manual or automatic method
- Supports standby battery
Programmed and managed by either iVMS4200 Software or HikCentral
- DS-K2604-G Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K2600 series access controller is designed with latest structure with TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of system. The controller also supports offline operation and is supplied in a locakable tampered housing complete with 6 Amp Power supply. battery not included.
Supports both 4 x Wiegand Card Readers (26 and 34 Bit) as well as 4 x RS485 encrypted Card Readers.
- 32-bit high-speed processor
- TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure information security
- The recognition and storage of card number with maximum 20 digits
- Massive storage with 100,000 cards information and 300,000
- Supports multi-door interlocking function (DS-K2602-G), anti-passback function, multi-card function, first card function, super card and super password function
- Online upgrade function and online remote control of the doors
- Supports alarm event upload (including tamper-proof alarm, unsecured door alarm, forced entry alarm, delayed door alarm,duress card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm)
- Short circuit attempts alarm and open circuit attempts alarm
- Supports zone alarm input
- Supports RS485 interface and Wiegand interface for accessing card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-party card reader with Wiegand interface
- Supports various card types such as normal/ disabled/ blacklist/ patrol/ guest/ duress/ super card, etc.
- Various indicators to show different device status
- Supports time synchronization via NTP, manual or automatic method
- Supports standby battery
Programmed and managed by either iVMS4200 Software or HikCentral
- DS-K2602-G Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K2600 series access controller is designed with latest structure with TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of system. The controller also supports offline operation and is supplied in a locakable tampered housing complete with 6 Amp Power supply. battery not included.
Supports both 4 x Wiegand Card Readers (26 and 34 Bit) as well as 4 x RS485 encrypted Card Readers.
- 32-bit high-speed processor
- TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure information security
- The recognition and storage of card number with maximum 20 digits
- Massive storage with 100,000 cards information and 300,000
- Supports multi-door interlocking function (DS-K2602-G), anti-passback function, multi-card function, first card function, super card and super password function
- Online upgrade function and online remote control of the doors
- Supports alarm event upload (including tamper-proof alarm, unsecured door alarm, forced entry alarm, delayed door alarm,duress card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm)
- Short circuit attempts alarm and open circuit attempts alarm
- Supports zone alarm input
- Supports RS485 interface and Wiegand interface for accessing card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-party card reader with Wiegand interface
- Supports various card types such as normal/ disabled/ blacklist/ patrol/ guest/ duress/ super card, etc.
- Various indicators to show different device status
- Supports time synchronization via NTP, manual or automatic method
- Supports standby battery
Programmed and managed by either iVMS4200 Software or HikCentral
- DS-K2602-G Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K1T804MF HIKVISION Single Door Stand Alone Access Control Terminal with Fingerprint Reader
Features
- Integrated management of access control and the attendance
- 2.4-inch LCD screen to display the time, the date and swiping/fingerprint authentication results
- Supports registering fingerprints from the terminal to software remotely
- Max. 3000 users, Max. 3000 fingerprints and Max. 100,000 event records
- Two attendance authentication modes: authentication by person, authentication by device
- Stand-alone operation: locally add person, card and fingerprint information
- Exports the swiping card data and the attendance report to the USB
- Up to 32 normal shifts and up to 32 man-hour shifts can be configured
- Up to 32 attendance holiday schedules and up to 128 access control holiday schedules can be configured
- Generates the attendance report automatically and view the attendance data easily
- The doorbell can connect the third party bell
- Tamper alarm and duress alarm function
- It is available to connect the external secure door control unit via RS-485 to avoid the door opening when the terminal is destroyed
- Intelligent English input
- Supports the third party alarm input.
-
DS-K1T804MF Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K1T804MF HIKVISION Single Door Stand Alone Access Control Terminal with Fingerprint Reader
Features
- Integrated management of access control and the attendance
- 2.4-inch LCD screen to display the time, the date and swiping/fingerprint authentication results
- Supports registering fingerprints from the terminal to software remotely
- Max. 3000 users, Max. 3000 fingerprints and Max. 100,000 event records
- Two attendance authentication modes: authentication by person, authentication by device
- Stand-alone operation: locally add person, card and fingerprint information
- Exports the swiping card data and the attendance report to the USB
- Up to 32 normal shifts and up to 32 man-hour shifts can be configured
- Up to 32 attendance holiday schedules and up to 128 access control holiday schedules can be configured
- Generates the attendance report automatically and view the attendance data easily
- The doorbell can connect the third party bell
- Tamper alarm and duress alarm function
- It is available to connect the external secure door control unit via RS-485 to avoid the door opening when the terminal is destroyed
- Intelligent English input
- Supports the third party alarm input.
-
DS-K1T804MF Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K1T671MF HIKVISION Face Recognition Terminal with Fingerprint Reader
Features
- 7-inch LCD touch screen
- 2 MP wide-angle dual-lens
- Adjusts supplement light brightness manually
- Face recognition in dark environment
- Face recognition distance: 0.3 to 3 m
- Suggested height for face recognition: between 1.4 m and 1.9 m
- Deep learning algorithm
- 5,000 face capacity, 5,000 fingerprint capacity, and 50,000 event capacity
- Multiple authentication modes
- Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
- Imports card and user data to the device via TCP/IP communication
- Stand-alone operation
- Transmits data to the client software via TCP/IP communication and saves the data on the client software
- Capture linkage and captured pictures saving
- Imports data to the device from the client software
- Manage, search and set device data after logging in the device locall
- Connects to one external card reader or access controller via RS-485 protocol
- Connects to external access controller or Wiegand card reader via Wiegand protocol
- Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
- Two-way audio with client software, indoor station, and master station
- Remote live view via RTSP protocol; encoding mode: H.264
- NTP, manually time synchronization, and auto synchronization
- Audio prompt
- Watchdog design and tamper function
- Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
- DS-K1T671MF Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K1T671MF HIKVISION Face Recognition Terminal with Fingerprint Reader
Features
- 7-inch LCD touch screen
- 2 MP wide-angle dual-lens
- Adjusts supplement light brightness manually
- Face recognition in dark environment
- Face recognition distance: 0.3 to 3 m
- Suggested height for face recognition: between 1.4 m and 1.9 m
- Deep learning algorithm
- 5,000 face capacity, 5,000 fingerprint capacity, and 50,000 event capacity
- Multiple authentication modes
- Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
- Imports card and user data to the device via TCP/IP communication
- Stand-alone operation
- Transmits data to the client software via TCP/IP communication and saves the data on the client software
- Capture linkage and captured pictures saving
- Imports data to the device from the client software
- Manage, search and set device data after logging in the device locall
- Connects to one external card reader or access controller via RS-485 protocol
- Connects to external access controller or Wiegand card reader via Wiegand protocol
- Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
- Two-way audio with client software, indoor station, and master station
- Remote live view via RTSP protocol; encoding mode: H.264
- NTP, manually time synchronization, and auto synchronization
- Audio prompt
- Watchdog design and tamper function
- Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
- DS-K1T671MF Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Hikvision Intercom, Apartment Door Station, Compact with Camera, CSN Card Reader
- Camera resolution: 2 MP
- Network connectivity: Ethernet and Wi-Fi
- Output: 1x Relay & 1x Wiegand
- Weather rating: IP65
- Anti-vandal rating: IK09
- Power source: 12-24V DC
- Power consumption: 12W
- Card reader: CSN (Mifare)
- Dimensions: 177 H x 81 W x 24 D (mm)
-
DS-K1T502DBWX-C specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
Hikvision Intercom, Apartment Door Station, Compact with Camera, CSN Card Reader
- Camera resolution: 2 MP
- Network connectivity: Ethernet and Wi-Fi
- Output: 1x Relay & 1x Wiegand
- Weather rating: IP65
- Anti-vandal rating: IK09
- Power source: 12-24V DC
- Power consumption: 12W
- Card reader: CSN (Mifare)
- Dimensions: 177 H x 81 W x 24 D (mm)
-
DS-K1T502DBWX-C specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K1107MK HIKVISION Proximity Card Reader with Keypad (Selectable Wiegand or RS485 O/P)
Features
- Equipped with the 32-bit high-speed processor
- RS-485 and Wiegand (W26/W34) protocol
- Build-in EM card reading module (Frequency:125KHz). Supports reading ID card No. (DS-K1107E/DS-K1107EK)
- Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A. Supports reading Mifare card No (DS-K1107M/DS-K1107MK)
- Supports tampering alarm
- Built-in buzzer for identifying the reading status
- Online upgrade function
- Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader
-
DS-K1107MK Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K1107MK HIKVISION Proximity Card Reader with Keypad (Selectable Wiegand or RS485 O/P)
Features
- Equipped with the 32-bit high-speed processor
- RS-485 and Wiegand (W26/W34) protocol
- Build-in EM card reading module (Frequency:125KHz). Supports reading ID card No. (DS-K1107E/DS-K1107EK)
- Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A. Supports reading Mifare card No (DS-K1107M/DS-K1107MK)
- Supports tampering alarm
- Built-in buzzer for identifying the reading status
- Online upgrade function
- Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader
-
DS-K1107MK Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K1107M HIKVISION Proximity Card Reader (Selectable Wiegand or RS485 O/P)
Features
- Equipped with the 32-bit high-speed processor
- RS-485 and Wiegand (W26/W34) protocol
- Build-in EM card reading module (Frequency:125KHz). Supports reading ID card No. (DS-K1107E/DS-K1107EK)
- Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A. Supports reading Mifare card No (DS-K1107M/DS-K1107MK)
- Supports tampering alarm
- Built-in buzzer for identifying the reading status
- Online upgrade function
- Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader
-
DS-K1107M Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-K1107M HIKVISION Proximity Card Reader (Selectable Wiegand or RS485 O/P)
Features
- Equipped with the 32-bit high-speed processor
- RS-485 and Wiegand (W26/W34) protocol
- Build-in EM card reading module (Frequency:125KHz). Supports reading ID card No. (DS-K1107E/DS-K1107EK)
- Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A. Supports reading Mifare card No (DS-K1107M/DS-K1107MK)
- Supports tampering alarm
- Built-in buzzer for identifying the reading status
- Online upgrade function
- Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader
-
DS-K1107M Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-D5022FN-C HIKVISION 21.5 inch FHD Monitor
- LED backlit technology with full HD 1920 x 1080
- Wide view angle: 178°(H)/178°(V)
- Multiply inputs: HDMI, VGA
- 3D comb filter, 3D De-interlace
- 3D noise reduction
- VESA stand bracket
- High reliability and stability, 24/7 operation
- DS-D5022FN-C Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
DS-D5022FN-C HIKVISION 21.5 inch FHD Monitor
- LED backlit technology with full HD 1920 x 1080
- Wide view angle: 178°(H)/178°(V)
- Multiply inputs: HDMI, VGA
- 3D comb filter, 3D De-interlace
- 3D noise reduction
- VESA stand bracket
- High reliability and stability, 24/7 operation
- DS-D5022FN-C Specification
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
- Third-party network cameras supported
- Up to 12MP resolution recording
- Video outputs at up to 4K (4096x2160) resolution
- Supports decoding up to 20 channels at 1080p resolution
- Up to 128/256 IP cameras can be connected with 512M/768M incoming bandwidth
- Up to 24 SATA interfaces
- Supports H.264+,H.264,MPEG4,H.265,MJPEG video format
- Support redundant power supply to improve the system stability
- Support HDD hot swap with RAID0,1,5,6,10 storage scheme configurable
- Support various VCA detection alarm and VCA search
Up to 12 Megapixels resolution recording, 768Mbps incoming/512Mbps outgoing bandwidth, HDMI up to 4K(3840x2160) resolution, ONVIF Supported, Ethernet interface 4x10/100/1000Mbps self-adaptive, Hik-connect, H.265/H.264/H.264+ video, No HDD Installed.
Spec of DS-96128NI-I8 
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
- Third-party network cameras supported
- Up to 12MP resolution recording
- Video outputs at up to 4K (4096x2160) resolution
- Supports decoding up to 20 channels at 1080p resolution
- Up to 128/256 IP cameras can be connected with 512M/768M incoming bandwidth
- Up to 24 SATA interfaces
- Supports H.264+,H.264,MPEG4,H.265,MJPEG video format
- Support redundant power supply to improve the system stability
- Support HDD hot swap with RAID0,1,5,6,10 storage scheme configurable
- Support various VCA detection alarm and VCA search
Up to 12 Megapixels resolution recording, 768Mbps incoming/512Mbps outgoing bandwidth, HDMI up to 4K(3840x2160) resolution, ONVIF Supported, Ethernet interface 4x10/100/1000Mbps self-adaptive, Hik-connect, H.265/H.264/H.264+ video, No HDD Installed.
Spec of DS-96128NI-I8
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
- 16ch plug and play independent PoE interfaces
- Supports up to 32 channels
- 320Mbps incoming bandwidth
- Up to 32 megapixels resolution recording
- Supports H.265+ to reduce storage space by up to 75 percent
- HDMI output to 8K
- VGA output at up to 1080P resolution
- 2 SATA interface with up to 16TB storage
- Dual stream recording
- Video content analytics (VCA)
Spec of DS-7732NI-M4-16P
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
- 16ch plug and play independent PoE interfaces
- Supports up to 32 channels
- 320Mbps incoming bandwidth
- Up to 32 megapixels resolution recording
- Supports H.265+ to reduce storage space by up to 75 percent
- HDMI output to 8K
- VGA output at up to 1080P resolution
- 2 SATA interface with up to 16TB storage
- Dual stream recording
- Video content analytics (VCA)
Spec of DS-7732NI-M4-16P
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
16-ch 1U 16 PoE 8K NVR
- H.265+/H.265/H.264+/H.264 video formats
- Up to 16-ch IP camera inputs
- Up to 16-ch@4MP decoding capacity
- Up to 256 Mbps incoming bandwidth
- Up to 8-ch IP speakers can be connected
- Datasheet
Video & Audio
IP Video Input
-
Channels: 16-ch
-
Maximum Resolution: Up to 32 MP
Note: After Ultra HD Resolution Mode is enabled, the NVR supports up to 8-ch 32 MP / 24 MP IP video inputs.
Bandwidth
-
Incoming: 256 Mbps
-
Outgoing: 256 Mbps
Video Outputs
-
HDMI Output:
-
8K (7680 × 4320) @ 30 Hz
-
4K (3840 × 2160) @ 60 Hz / 30 Hz
-
2K (2560 × 1440) @ 60 Hz
-
1920 × 1080 @ 60 Hz
-
-
VGA Output: 1920 × 1080 @ 60 Hz
-
Video Output Mode: HDMI / VGA independent output
-
CVBS Output:
-
1-ch BNC (1.0 Vp-p, 75 Ω)
-
PAL: 704 × 576
-
NTSC: 704 × 480
-
Audio
-
Audio Output: 1-ch RCA (Linear, 1 kΩ)
-
Two-Way Audio: 1-ch RCA (2.0 Vp-p, 1 kΩ, via audio input)
-
Audio Compression: G.711uLaw, G.711aLaw, G.722, G.726, AAC, MP2L2
Decoding & Recording
Decoding Format
-
H.265+, H.265, H.264+, H.264
Recording Resolution
-
32 MP / 24 MP / 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP
-
1080p / UXGA / 720p / VGA
-
4CIF / DCIF / 2CIF / CIF / QCIF
Note: After Ultra HD Resolution Mode is enabled, the NVR supports up to 8-ch 32 MP / 24 MP IP video inputs.
Playback & Performance
-
Synchronous Playback: 16-ch
-
Decoding Capability:
-
2-ch @ 32 MP (30 fps) + 2-ch @ 8 MP (30 fps)
-
10-ch @ 8 MP (30 fps)
-
20-ch @ 4 MP (30 fps)
-
40-ch @ 1080p (30 fps)
-
-
Dual-Stream Recording: Supported
-
Stream Type: Video / Video & Audio
Network
-
Remote Connections: Up to 128
-
Network Interface:
-
1 × RJ-45 10/100/1000 Mbps self-adaptive Ethernet
-
-
Network Protocols:
TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP,
NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS, ONVIF (v2.2), OTAP -
Camera Access Protocol: ONVIF (v2.5), RTSP
PoE
-
PoE Ports: 16 × RJ-45 10/100 Mbps self-adaptive
-
PoE Standard: IEEE 802.3af / 802.3at
-
PoE Power Budget: ≤ 200 W
Interfaces & Storage
-
SATA: 2 × SATA interfaces
-
HDD Capacity: Up to 16 TB per disk
-
Alarm I/O: 4 In / 1 Out
-
USB Ports:
-
Front: 1 × USB 2.0
-
Rear: 1 × USB 3.0
-
General
-
Power Supply: 100–240 VAC, 50–60 Hz
-
Power Consumption: ≤ 15 W (without HDD, PoE off)
-
Operating Temperature: −10 °C to 55 °C (14 °F to 131 °F)
-
Operating Humidity: 10% to 90%
-
Dimensions (W × D × H): 385 × 315 × 52 mm
(15.2" × 12.4" × 2.0") -
Weight: ≤ 3 kg (without HDD)
Certifications
-
FCC: Part 15 Subpart B, ANSI C63.4-2014
-
CE:
-
EN 55032:2015 + A1:2020
-
EN IEC 61000-3-2:2019 + A1:2021
-
EN 61000-3-3:2013 + A1:2019
-
EN 50130-4:2011 + A1:2014
-
EN 55035:2017 + A11:2020
-
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
16-ch 1U 16 PoE 8K NVR
- H.265+/H.265/H.264+/H.264 video formats
- Up to 16-ch IP camera inputs
- Up to 16-ch@4MP decoding capacity
- Up to 256 Mbps incoming bandwidth
- Up to 8-ch IP speakers can be connected
- Datasheet
Video & Audio
IP Video Input
-
Channels: 16-ch
-
Maximum Resolution: Up to 32 MP
Note: After Ultra HD Resolution Mode is enabled, the NVR supports up to 8-ch 32 MP / 24 MP IP video inputs.
Bandwidth
-
Incoming: 256 Mbps
-
Outgoing: 256 Mbps
Video Outputs
-
HDMI Output:
-
8K (7680 × 4320) @ 30 Hz
-
4K (3840 × 2160) @ 60 Hz / 30 Hz
-
2K (2560 × 1440) @ 60 Hz
-
1920 × 1080 @ 60 Hz
-
-
VGA Output: 1920 × 1080 @ 60 Hz
-
Video Output Mode: HDMI / VGA independent output
-
CVBS Output:
-
1-ch BNC (1.0 Vp-p, 75 Ω)
-
PAL: 704 × 576
-
NTSC: 704 × 480
-
Audio
-
Audio Output: 1-ch RCA (Linear, 1 kΩ)
-
Two-Way Audio: 1-ch RCA (2.0 Vp-p, 1 kΩ, via audio input)
-
Audio Compression: G.711uLaw, G.711aLaw, G.722, G.726, AAC, MP2L2
Decoding & Recording
Decoding Format
-
H.265+, H.265, H.264+, H.264
Recording Resolution
-
32 MP / 24 MP / 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP
-
1080p / UXGA / 720p / VGA
-
4CIF / DCIF / 2CIF / CIF / QCIF
Note: After Ultra HD Resolution Mode is enabled, the NVR supports up to 8-ch 32 MP / 24 MP IP video inputs.
Playback & Performance
-
Synchronous Playback: 16-ch
-
Decoding Capability:
-
2-ch @ 32 MP (30 fps) + 2-ch @ 8 MP (30 fps)
-
10-ch @ 8 MP (30 fps)
-
20-ch @ 4 MP (30 fps)
-
40-ch @ 1080p (30 fps)
-
-
Dual-Stream Recording: Supported
-
Stream Type: Video / Video & Audio
Network
-
Remote Connections: Up to 128
-
Network Interface:
-
1 × RJ-45 10/100/1000 Mbps self-adaptive Ethernet
-
-
Network Protocols:
TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP,
NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS, ONVIF (v2.2), OTAP -
Camera Access Protocol: ONVIF (v2.5), RTSP
PoE
-
PoE Ports: 16 × RJ-45 10/100 Mbps self-adaptive
-
PoE Standard: IEEE 802.3af / 802.3at
-
PoE Power Budget: ≤ 200 W
Interfaces & Storage
-
SATA: 2 × SATA interfaces
-
HDD Capacity: Up to 16 TB per disk
-
Alarm I/O: 4 In / 1 Out
-
USB Ports:
-
Front: 1 × USB 2.0
-
Rear: 1 × USB 3.0
-
General
-
Power Supply: 100–240 VAC, 50–60 Hz
-
Power Consumption: ≤ 15 W (without HDD, PoE off)
-
Operating Temperature: −10 °C to 55 °C (14 °F to 131 °F)
-
Operating Humidity: 10% to 90%
-
Dimensions (W × D × H): 385 × 315 × 52 mm
(15.2" × 12.4" × 2.0") -
Weight: ≤ 3 kg (without HDD)
Certifications
-
FCC: Part 15 Subpart B, ANSI C63.4-2014
-
CE:
-
EN 55032:2015 + A1:2020
-
EN IEC 61000-3-2:2019 + A1:2021
-
EN 61000-3-3:2013 + A1:2019
-
EN 50130-4:2011 + A1:2014
-
EN 55035:2017 + A11:2020
-
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
16-ch 1U 16 PoE 8K NVR
- H.265+/H.265/H.264+/H.264 video formats
- Up to 16-ch IP camera inputs
- Up to 16-ch@4MP decoding capacity
- Up to 256 Mbps incoming bandwidth
- Up to 8-ch IP speakers can be connected
- Datasheet
Video & Audio
IP Video Input
-
Channels: 16-ch
-
Maximum Resolution: Up to 32 MP
Note: After Ultra HD Resolution Mode is enabled, the NVR supports up to 8-ch 32 MP / 24 MP IP video inputs.
Bandwidth
-
Incoming: 256 Mbps
-
Outgoing: 256 Mbps
Video Outputs
-
HDMI Output:
-
8K (7680 × 4320) @ 30 Hz
-
4K (3840 × 2160) @ 60 Hz / 30 Hz
-
2K (2560 × 1440) @ 60 Hz
-
1920 × 1080 @ 60 Hz
-
-
VGA Output: 1920 × 1080 @ 60 Hz
-
Video Output Mode: HDMI / VGA independent output
-
CVBS Output:
-
1-ch BNC (1.0 Vp-p, 75 Ω)
-
PAL: 704 × 576
-
NTSC: 704 × 480
-
Audio
-
Audio Output: 1-ch RCA (Linear, 1 kΩ)
-
Two-Way Audio: 1-ch RCA (2.0 Vp-p, 1 kΩ, via audio input)
-
Audio Compression: G.711uLaw, G.711aLaw, G.722, G.726, AAC, MP2L2
Decoding & Recording
Decoding Format
-
H.265+, H.265, H.264+, H.264
Recording Resolution
-
32 MP / 24 MP / 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP
-
1080p / UXGA / 720p / VGA
-
4CIF / DCIF / 2CIF / CIF / QCIF
Note: After Ultra HD Resolution Mode is enabled, the NVR supports up to 8-ch 32 MP / 24 MP IP video inputs.
Playback & Performance
-
Synchronous Playback: 16-ch
-
Decoding Capability:
-
2-ch @ 32 MP (30 fps) + 2-ch @ 8 MP (30 fps)
-
10-ch @ 8 MP (30 fps)
-
20-ch @ 4 MP (30 fps)
-
40-ch @ 1080p (30 fps)
-
-
Dual-Stream Recording: Supported
-
Stream Type: Video / Video & Audio
Network
-
Remote Connections: Up to 128
-
Network Interface:
-
1 × RJ-45 10/100/1000 Mbps self-adaptive Ethernet
-
-
Network Protocols:
TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP,
NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS, ONVIF (v2.2), OTAP -
Camera Access Protocol: ONVIF (v2.5), RTSP
PoE
-
PoE Ports: 16 × RJ-45 10/100 Mbps self-adaptive
-
PoE Standard: IEEE 802.3af / 802.3at
-
PoE Power Budget: ≤ 200 W
Interfaces & Storage
-
SATA: 2 × SATA interfaces
-
HDD Capacity: Up to 16 TB per disk
-
Alarm I/O: 4 In / 1 Out
-
USB Ports:
-
Front: 1 × USB 2.0
-
Rear: 1 × USB 3.0
-
General
-
Power Supply: 100–240 VAC, 50–60 Hz
-
Power Consumption: ≤ 15 W (without HDD, PoE off)
-
Operating Temperature: −10 °C to 55 °C (14 °F to 131 °F)
-
Operating Humidity: 10% to 90%
-
Dimensions (W × D × H): 385 × 315 × 52 mm
(15.2" × 12.4" × 2.0") -
Weight: ≤ 3 kg (without HDD)
Certifications
-
FCC: Part 15 Subpart B, ANSI C63.4-2014
-
CE:
-
EN 55032:2015 + A1:2020
-
EN IEC 61000-3-2:2019 + A1:2021
-
EN 61000-3-3:2013 + A1:2019
-
EN 50130-4:2011 + A1:2014
-
EN 55035:2017 + A11:2020
-
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
16-ch 1U 16 PoE 8K NVR
- H.265+/H.265/H.264+/H.264 video formats
- Up to 16-ch IP camera inputs
- Up to 16-ch@4MP decoding capacity
- Up to 256 Mbps incoming bandwidth
- Up to 8-ch IP speakers can be connected
- Datasheet
Video & Audio
IP Video Input
-
Channels: 16-ch
-
Maximum Resolution: Up to 32 MP
Note: After Ultra HD Resolution Mode is enabled, the NVR supports up to 8-ch 32 MP / 24 MP IP video inputs.
Bandwidth
-
Incoming: 256 Mbps
-
Outgoing: 256 Mbps
Video Outputs
-
HDMI Output:
-
8K (7680 × 4320) @ 30 Hz
-
4K (3840 × 2160) @ 60 Hz / 30 Hz
-
2K (2560 × 1440) @ 60 Hz
-
1920 × 1080 @ 60 Hz
-
-
VGA Output: 1920 × 1080 @ 60 Hz
-
Video Output Mode: HDMI / VGA independent output
-
CVBS Output:
-
1-ch BNC (1.0 Vp-p, 75 Ω)
-
PAL: 704 × 576
-
NTSC: 704 × 480
-
Audio
-
Audio Output: 1-ch RCA (Linear, 1 kΩ)
-
Two-Way Audio: 1-ch RCA (2.0 Vp-p, 1 kΩ, via audio input)
-
Audio Compression: G.711uLaw, G.711aLaw, G.722, G.726, AAC, MP2L2
Decoding & Recording
Decoding Format
-
H.265+, H.265, H.264+, H.264
Recording Resolution
-
32 MP / 24 MP / 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP
-
1080p / UXGA / 720p / VGA
-
4CIF / DCIF / 2CIF / CIF / QCIF
Note: After Ultra HD Resolution Mode is enabled, the NVR supports up to 8-ch 32 MP / 24 MP IP video inputs.
Playback & Performance
-
Synchronous Playback: 16-ch
-
Decoding Capability:
-
2-ch @ 32 MP (30 fps) + 2-ch @ 8 MP (30 fps)
-
10-ch @ 8 MP (30 fps)
-
20-ch @ 4 MP (30 fps)
-
40-ch @ 1080p (30 fps)
-
-
Dual-Stream Recording: Supported
-
Stream Type: Video / Video & Audio
Network
-
Remote Connections: Up to 128
-
Network Interface:
-
1 × RJ-45 10/100/1000 Mbps self-adaptive Ethernet
-
-
Network Protocols:
TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP,
NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS, ONVIF (v2.2), OTAP -
Camera Access Protocol: ONVIF (v2.5), RTSP
PoE
-
PoE Ports: 16 × RJ-45 10/100 Mbps self-adaptive
-
PoE Standard: IEEE 802.3af / 802.3at
-
PoE Power Budget: ≤ 200 W
Interfaces & Storage
-
SATA: 2 × SATA interfaces
-
HDD Capacity: Up to 16 TB per disk
-
Alarm I/O: 4 In / 1 Out
-
USB Ports:
-
Front: 1 × USB 2.0
-
Rear: 1 × USB 3.0
-
General
-
Power Supply: 100–240 VAC, 50–60 Hz
-
Power Consumption: ≤ 15 W (without HDD, PoE off)
-
Operating Temperature: −10 °C to 55 °C (14 °F to 131 °F)
-
Operating Humidity: 10% to 90%
-
Dimensions (W × D × H): 385 × 315 × 52 mm
(15.2" × 12.4" × 2.0") -
Weight: ≤ 3 kg (without HDD)
Certifications
-
FCC: Part 15 Subpart B, ANSI C63.4-2014
-
CE:
-
EN 55032:2015 + A1:2020
-
EN IEC 61000-3-2:2019 + A1:2021
-
EN 61000-3-3:2013 + A1:2019
-
EN 50130-4:2011 + A1:2014
-
EN 55035:2017 + A11:2020
-
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
8-ch PoE 1U K Series AcuSense 4K NVR
- Up to 8-ch IP camera inputs, plug & play with 8 power-over-Ethernet (PoE) interfaces
- H.265+/H.265/H.264+/H.264 video formats
- Up to 1-ch@12 MP or 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity
- Up to 80 Mbps incoming bandwidth
- Adopt Hikvision Acusense technology to minimize manual effort and security costs
- 4TB Hard Drive
- Datasheet
Intelligent Analytics
-
AI by Device:
- Facial recognition
- Perimeter protection
- Motion detection 2.0
-
AI by Camera:
- Facial recognition
- Perimeter protection
- Throwing objects from building
- Motion detection 2.0
- ANPR
- VCA
Facial Recognition
-
Facial Detection and Analytics:
- Face picture comparison
- Human face capture
- Face picture search
-
Face Picture Library:
- Up to 16 face picture libraries
- Total of up to 20,000 face pictures (each picture ≤ 4 MB, total capacity ≤ 1 GB)
Facial Detection and Analytics Performance
- 1-ch, 8 MP
-
Face Picture Comparison
- 4-ch
Motion Detection 2.0
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
- 4-ch, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
- All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Perimeter Protection
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Throwing Objects from Building
-
By Camera:
- All channels
Video and Audio
-
IP Video Input:
- 8-ch
-
Incoming Bandwidth:
- 80 Mbps
-
Outgoing Bandwidth:
- 80 Mbps
-
HDMI Output:
- 1-ch, 4K (3840 × 2160)/30 Hz
- 2K (2560 × 1440)/60 Hz
- 1920 × 1080/60 Hz
- 1600 × 1200/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
VGA Output:
- 1-ch, 1920 × 1080/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
Video Output Mode:
- HDMI/VGA simultaneous output
- HDMI/VGA independent output
-
CVBS Output:
- N/A
-
Audio Output:
- 1-ch, RCA (Linear, 1 KΩ)
-
Two-Way Audio:
- 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
-
Decoding Format:
- H.265/H.265+/H.264+/H.264
-
Recording Resolution:
- 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
-
Synchronous Playback:
- 8-ch
-
Decoding Capability:
- AI on: 1-ch@12 MP (30 fps) / 1-ch@8 MP (30 fps) / 3-ch@4 MP (30 fps) / 6-ch@1080p (30 fps)
- AI off: 1-ch@12 MP (30 fps) / 2-ch@8 MP (30 fps) / 4-ch@4 MP (30 fps) / 8-ch@1080p (30 fps)
-
Stream Type:
- Video
- Video & Audio
-
Audio Compression:
- G.711ulaw / G.711alaw / G.722 / G.726 / AAC
Network
-
Remote Connection:
- 128
-
API:
- ONVIF (profile S/G)
- SDK
- ISAPI
-
Compatible Browser:
- IE11, Chrome V57, Firefox V52, Safari V12, Edge V89, or above version
-
Network Protocol:
- TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
-
Network Interface:
- 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
- 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface
-
PoE Interface:
- 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface
Power
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
Auxiliary Interface
-
SATA:
- 1 SATA interface
-
Capacity:
- Up to 10 TB capacity for each HDD
-
USB Interface:
- Front panel: 1 × USB 2.0
- Rear panel: 1 × USB 2.0
-
Alarm In/Out:
- 4/1; N/A; N/A; N/A (4/1 is optional)
General
-
GUI Language:
- English, Russian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Turkish, Japanese, Danish, Swedish, Norwegian, Finnish, Korean, Traditional Chinese, Thai, Estonian, Vietnamese, Croatian, Slovenian, Serbian, Latvian, Lithuanian, Uzbek, Kazakh, Arabic, Ukrainian, Kyrgyz, Brazilian Portuguese, Indonesian
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
-
Working Temperature:
- -10 °C to 55 °C (14 °F to 131 °F)
-
Working Humidity:
- 10% to 90%
-
Dimension (W × D × H):
- 320 mm × 240 mm × 48 mm (12.6" × 9.4" × 1.9")
-
Weight:
- ≤ 1 kg (without HDD, 2.2 lb.)
Certification
-
FCC:
- Part 15 Subpart B, ANSI C63.4-2014
-
CE:
- EN 55032: 2015
- EN 61000-3-2
- EN 61000-3-3
- EN 50130-4
- EN 55035: 2017
-
Obtained Certification:
- CE, FCC, IC, CB, KC, UL, RoHS, REACH, WEEE, RCM, UKCA, LOA, BIS
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
8-ch PoE 1U K Series AcuSense 4K NVR
- Up to 8-ch IP camera inputs, plug & play with 8 power-over-Ethernet (PoE) interfaces
- H.265+/H.265/H.264+/H.264 video formats
- Up to 1-ch@12 MP or 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity
- Up to 80 Mbps incoming bandwidth
- Adopt Hikvision Acusense technology to minimize manual effort and security costs
- 4TB Hard Drive
- Datasheet
Intelligent Analytics
-
AI by Device:
- Facial recognition
- Perimeter protection
- Motion detection 2.0
-
AI by Camera:
- Facial recognition
- Perimeter protection
- Throwing objects from building
- Motion detection 2.0
- ANPR
- VCA
Facial Recognition
-
Facial Detection and Analytics:
- Face picture comparison
- Human face capture
- Face picture search
-
Face Picture Library:
- Up to 16 face picture libraries
- Total of up to 20,000 face pictures (each picture ≤ 4 MB, total capacity ≤ 1 GB)
Facial Detection and Analytics Performance
- 1-ch, 8 MP
-
Face Picture Comparison
- 4-ch
Motion Detection 2.0
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
- 4-ch, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
- All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Perimeter Protection
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Throwing Objects from Building
-
By Camera:
- All channels
Video and Audio
-
IP Video Input:
- 8-ch
-
Incoming Bandwidth:
- 80 Mbps
-
Outgoing Bandwidth:
- 80 Mbps
-
HDMI Output:
- 1-ch, 4K (3840 × 2160)/30 Hz
- 2K (2560 × 1440)/60 Hz
- 1920 × 1080/60 Hz
- 1600 × 1200/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
VGA Output:
- 1-ch, 1920 × 1080/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
Video Output Mode:
- HDMI/VGA simultaneous output
- HDMI/VGA independent output
-
CVBS Output:
- N/A
-
Audio Output:
- 1-ch, RCA (Linear, 1 KΩ)
-
Two-Way Audio:
- 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
-
Decoding Format:
- H.265/H.265+/H.264+/H.264
-
Recording Resolution:
- 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
-
Synchronous Playback:
- 8-ch
-
Decoding Capability:
- AI on: 1-ch@12 MP (30 fps) / 1-ch@8 MP (30 fps) / 3-ch@4 MP (30 fps) / 6-ch@1080p (30 fps)
- AI off: 1-ch@12 MP (30 fps) / 2-ch@8 MP (30 fps) / 4-ch@4 MP (30 fps) / 8-ch@1080p (30 fps)
-
Stream Type:
- Video
- Video & Audio
-
Audio Compression:
- G.711ulaw / G.711alaw / G.722 / G.726 / AAC
Network
-
Remote Connection:
- 128
-
API:
- ONVIF (profile S/G)
- SDK
- ISAPI
-
Compatible Browser:
- IE11, Chrome V57, Firefox V52, Safari V12, Edge V89, or above version
-
Network Protocol:
- TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
-
Network Interface:
- 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
- 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface
-
PoE Interface:
- 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface
Power
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
Auxiliary Interface
-
SATA:
- 1 SATA interface
-
Capacity:
- Up to 10 TB capacity for each HDD
-
USB Interface:
- Front panel: 1 × USB 2.0
- Rear panel: 1 × USB 2.0
-
Alarm In/Out:
- 4/1; N/A; N/A; N/A (4/1 is optional)
General
-
GUI Language:
- English, Russian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Turkish, Japanese, Danish, Swedish, Norwegian, Finnish, Korean, Traditional Chinese, Thai, Estonian, Vietnamese, Croatian, Slovenian, Serbian, Latvian, Lithuanian, Uzbek, Kazakh, Arabic, Ukrainian, Kyrgyz, Brazilian Portuguese, Indonesian
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
-
Working Temperature:
- -10 °C to 55 °C (14 °F to 131 °F)
-
Working Humidity:
- 10% to 90%
-
Dimension (W × D × H):
- 320 mm × 240 mm × 48 mm (12.6" × 9.4" × 1.9")
-
Weight:
- ≤ 1 kg (without HDD, 2.2 lb.)
Certification
-
FCC:
- Part 15 Subpart B, ANSI C63.4-2014
-
CE:
- EN 55032: 2015
- EN 61000-3-2
- EN 61000-3-3
- EN 50130-4
- EN 55035: 2017
-
Obtained Certification:
- CE, FCC, IC, CB, KC, UL, RoHS, REACH, WEEE, RCM, UKCA, LOA, BIS
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
8-ch PoE 1U K Series AcuSense 4K NVR
- Up to 8-ch IP camera inputs, plug & play with 8 power-over-Ethernet (PoE) interfaces
- H.265+/H.265/H.264+/H.264 video formats
- Up to 1-ch@12 MP or 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity
- Up to 80 Mbps incoming bandwidth
- Adopt Hikvision Acusense technology to minimize manual effort and security costs
- 3TB Hard Drive
- Datasheet
Intelligent Analytics
-
AI by Device:
- Facial recognition
- Perimeter protection
- Motion detection 2.0
-
AI by Camera:
- Facial recognition
- Perimeter protection
- Throwing objects from building
- Motion detection 2.0
- ANPR
- VCA
Facial Recognition
-
Facial Detection and Analytics:
- Face picture comparison
- Human face capture
- Face picture search
-
Face Picture Library:
- Up to 16 face picture libraries
- Total of up to 20,000 face pictures (each picture ≤ 4 MB, total capacity ≤ 1 GB)
Facial Detection and Analytics Performance
- 1-ch, 8 MP
-
Face Picture Comparison
- 4-ch
Motion Detection 2.0
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
- 4-ch, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
- All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Perimeter Protection
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Throwing Objects from Building
-
By Camera:
- All channels
Video and Audio
-
IP Video Input:
- 8-ch
-
Incoming Bandwidth:
- 80 Mbps
-
Outgoing Bandwidth:
- 80 Mbps
-
HDMI Output:
- 1-ch, 4K (3840 × 2160)/30 Hz
- 2K (2560 × 1440)/60 Hz
- 1920 × 1080/60 Hz
- 1600 × 1200/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
VGA Output:
- 1-ch, 1920 × 1080/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
Video Output Mode:
- HDMI/VGA simultaneous output
- HDMI/VGA independent output
-
CVBS Output:
- N/A
-
Audio Output:
- 1-ch, RCA (Linear, 1 KΩ)
-
Two-Way Audio:
- 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
-
Decoding Format:
- H.265/H.265+/H.264+/H.264
-
Recording Resolution:
- 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
-
Synchronous Playback:
- 8-ch
-
Decoding Capability:
- AI on: 1-ch@12 MP (30 fps) / 1-ch@8 MP (30 fps) / 3-ch@4 MP (30 fps) / 6-ch@1080p (30 fps)
- AI off: 1-ch@12 MP (30 fps) / 2-ch@8 MP (30 fps) / 4-ch@4 MP (30 fps) / 8-ch@1080p (30 fps)
-
Stream Type:
- Video
- Video & Audio
-
Audio Compression:
- G.711ulaw / G.711alaw / G.722 / G.726 / AAC
Network
-
Remote Connection:
- 128
-
API:
- ONVIF (profile S/G)
- SDK
- ISAPI
-
Compatible Browser:
- IE11, Chrome V57, Firefox V52, Safari V12, Edge V89, or above version
-
Network Protocol:
- TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
-
Network Interface:
- 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
- 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface
-
PoE Interface:
- 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface
Power
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
Auxiliary Interface
-
SATA:
- 1 SATA interface
-
Capacity:
- Up to 10 TB capacity for each HDD
-
USB Interface:
- Front panel: 1 × USB 2.0
- Rear panel: 1 × USB 2.0
-
Alarm In/Out:
- 4/1; N/A; N/A; N/A (4/1 is optional)
General
-
GUI Language:
- English, Russian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Turkish, Japanese, Danish, Swedish, Norwegian, Finnish, Korean, Traditional Chinese, Thai, Estonian, Vietnamese, Croatian, Slovenian, Serbian, Latvian, Lithuanian, Uzbek, Kazakh, Arabic, Ukrainian, Kyrgyz, Brazilian Portuguese, Indonesian
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
-
Working Temperature:
- -10 °C to 55 °C (14 °F to 131 °F)
-
Working Humidity:
- 10% to 90%
-
Dimension (W × D × H):
- 320 mm × 240 mm × 48 mm (12.6" × 9.4" × 1.9")
-
Weight:
- ≤ 1 kg (without HDD, 2.2 lb.)
Certification
-
FCC:
- Part 15 Subpart B, ANSI C63.4-2014
-
CE:
- EN 55032: 2015
- EN 61000-3-2
- EN 61000-3-3
- EN 50130-4
- EN 55035: 2017
-
Obtained Certification:
- CE, FCC, IC, CB, KC, UL, RoHS, REACH, WEEE, RCM, UKCA, LOA, BIS
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
8-ch PoE 1U K Series AcuSense 4K NVR
- Up to 8-ch IP camera inputs, plug & play with 8 power-over-Ethernet (PoE) interfaces
- H.265+/H.265/H.264+/H.264 video formats
- Up to 1-ch@12 MP or 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity
- Up to 80 Mbps incoming bandwidth
- Adopt Hikvision Acusense technology to minimize manual effort and security costs
- 3TB Hard Drive
- Datasheet
Intelligent Analytics
-
AI by Device:
- Facial recognition
- Perimeter protection
- Motion detection 2.0
-
AI by Camera:
- Facial recognition
- Perimeter protection
- Throwing objects from building
- Motion detection 2.0
- ANPR
- VCA
Facial Recognition
-
Facial Detection and Analytics:
- Face picture comparison
- Human face capture
- Face picture search
-
Face Picture Library:
- Up to 16 face picture libraries
- Total of up to 20,000 face pictures (each picture ≤ 4 MB, total capacity ≤ 1 GB)
Facial Detection and Analytics Performance
- 1-ch, 8 MP
-
Face Picture Comparison
- 4-ch
Motion Detection 2.0
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
- 4-ch, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
- All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Perimeter Protection
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Throwing Objects from Building
-
By Camera:
- All channels
Video and Audio
-
IP Video Input:
- 8-ch
-
Incoming Bandwidth:
- 80 Mbps
-
Outgoing Bandwidth:
- 80 Mbps
-
HDMI Output:
- 1-ch, 4K (3840 × 2160)/30 Hz
- 2K (2560 × 1440)/60 Hz
- 1920 × 1080/60 Hz
- 1600 × 1200/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
VGA Output:
- 1-ch, 1920 × 1080/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
Video Output Mode:
- HDMI/VGA simultaneous output
- HDMI/VGA independent output
-
CVBS Output:
- N/A
-
Audio Output:
- 1-ch, RCA (Linear, 1 KΩ)
-
Two-Way Audio:
- 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
-
Decoding Format:
- H.265/H.265+/H.264+/H.264
-
Recording Resolution:
- 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
-
Synchronous Playback:
- 8-ch
-
Decoding Capability:
- AI on: 1-ch@12 MP (30 fps) / 1-ch@8 MP (30 fps) / 3-ch@4 MP (30 fps) / 6-ch@1080p (30 fps)
- AI off: 1-ch@12 MP (30 fps) / 2-ch@8 MP (30 fps) / 4-ch@4 MP (30 fps) / 8-ch@1080p (30 fps)
-
Stream Type:
- Video
- Video & Audio
-
Audio Compression:
- G.711ulaw / G.711alaw / G.722 / G.726 / AAC
Network
-
Remote Connection:
- 128
-
API:
- ONVIF (profile S/G)
- SDK
- ISAPI
-
Compatible Browser:
- IE11, Chrome V57, Firefox V52, Safari V12, Edge V89, or above version
-
Network Protocol:
- TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
-
Network Interface:
- 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
- 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface
-
PoE Interface:
- 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface
Power
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
Auxiliary Interface
-
SATA:
- 1 SATA interface
-
Capacity:
- Up to 10 TB capacity for each HDD
-
USB Interface:
- Front panel: 1 × USB 2.0
- Rear panel: 1 × USB 2.0
-
Alarm In/Out:
- 4/1; N/A; N/A; N/A (4/1 is optional)
General
-
GUI Language:
- English, Russian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Turkish, Japanese, Danish, Swedish, Norwegian, Finnish, Korean, Traditional Chinese, Thai, Estonian, Vietnamese, Croatian, Slovenian, Serbian, Latvian, Lithuanian, Uzbek, Kazakh, Arabic, Ukrainian, Kyrgyz, Brazilian Portuguese, Indonesian
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
-
Working Temperature:
- -10 °C to 55 °C (14 °F to 131 °F)
-
Working Humidity:
- 10% to 90%
-
Dimension (W × D × H):
- 320 mm × 240 mm × 48 mm (12.6" × 9.4" × 1.9")
-
Weight:
- ≤ 1 kg (without HDD, 2.2 lb.)
Certification
-
FCC:
- Part 15 Subpart B, ANSI C63.4-2014
-
CE:
- EN 55032: 2015
- EN 61000-3-2
- EN 61000-3-3
- EN 50130-4
- EN 55035: 2017
-
Obtained Certification:
- CE, FCC, IC, CB, KC, UL, RoHS, REACH, WEEE, RCM, UKCA, LOA, BIS
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
8-ch PoE 1U K Series AcuSense 4K NVR
- Up to 8-ch IP camera inputs, plug & play with 8 power-over-Ethernet (PoE) interfaces
- H.265+/H.265/H.264+/H.264 video formats
- Up to 1-ch@12 MP or 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity
- Up to 80 Mbps incoming bandwidth
- Adopt Hikvision Acusense technology to minimize manual effort and security costs
- 2TB Hard Drive
- Datasheet
Intelligent Analytics
-
AI by Device:
- Facial recognition
- Perimeter protection
- Motion detection 2.0
-
AI by Camera:
- Facial recognition
- Perimeter protection
- Throwing objects from building
- Motion detection 2.0
- ANPR
- VCA
Facial Recognition
-
Facial Detection and Analytics:
- Face picture comparison
- Human face capture
- Face picture search
-
Face Picture Library:
- Up to 16 face picture libraries
- Total of up to 20,000 face pictures (each picture ≤ 4 MB, total capacity ≤ 1 GB)
Facial Detection and Analytics Performance
- 1-ch, 8 MP
-
Face Picture Comparison
- 4-ch
Motion Detection 2.0
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
- 4-ch, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
- All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Perimeter Protection
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Throwing Objects from Building
-
By Camera:
- All channels
Video and Audio
-
IP Video Input:
- 8-ch
-
Incoming Bandwidth:
- 80 Mbps
-
Outgoing Bandwidth:
- 80 Mbps
-
HDMI Output:
- 1-ch, 4K (3840 × 2160)/30 Hz
- 2K (2560 × 1440)/60 Hz
- 1920 × 1080/60 Hz
- 1600 × 1200/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
VGA Output:
- 1-ch, 1920 × 1080/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
Video Output Mode:
- HDMI/VGA simultaneous output
- HDMI/VGA independent output
-
CVBS Output:
- N/A
-
Audio Output:
- 1-ch, RCA (Linear, 1 KΩ)
-
Two-Way Audio:
- 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
-
Decoding Format:
- H.265/H.265+/H.264+/H.264
-
Recording Resolution:
- 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
-
Synchronous Playback:
- 8-ch
-
Decoding Capability:
- AI on: 1-ch@12 MP (30 fps) / 1-ch@8 MP (30 fps) / 3-ch@4 MP (30 fps) / 6-ch@1080p (30 fps)
- AI off: 1-ch@12 MP (30 fps) / 2-ch@8 MP (30 fps) / 4-ch@4 MP (30 fps) / 8-ch@1080p (30 fps)
-
Stream Type:
- Video
- Video & Audio
-
Audio Compression:
- G.711ulaw / G.711alaw / G.722 / G.726 / AAC
Network
-
Remote Connection:
- 128
-
API:
- ONVIF (profile S/G)
- SDK
- ISAPI
-
Compatible Browser:
- IE11, Chrome V57, Firefox V52, Safari V12, Edge V89, or above version
-
Network Protocol:
- TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
-
Network Interface:
- 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
- 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface
-
PoE Interface:
- 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface
Power
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
Auxiliary Interface
-
SATA:
- 1 SATA interface
-
Capacity:
- Up to 10 TB capacity for each HDD
-
USB Interface:
- Front panel: 1 × USB 2.0
- Rear panel: 1 × USB 2.0
-
Alarm In/Out:
- 4/1; N/A; N/A; N/A (4/1 is optional)
General
-
GUI Language:
- English, Russian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Turkish, Japanese, Danish, Swedish, Norwegian, Finnish, Korean, Traditional Chinese, Thai, Estonian, Vietnamese, Croatian, Slovenian, Serbian, Latvian, Lithuanian, Uzbek, Kazakh, Arabic, Ukrainian, Kyrgyz, Brazilian Portuguese, Indonesian
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
-
Working Temperature:
- -10 °C to 55 °C (14 °F to 131 °F)
-
Working Humidity:
- 10% to 90%
-
Dimension (W × D × H):
- 320 mm × 240 mm × 48 mm (12.6" × 9.4" × 1.9")
-
Weight:
- ≤ 1 kg (without HDD, 2.2 lb.)
Certification
-
FCC:
- Part 15 Subpart B, ANSI C63.4-2014
-
CE:
- EN 55032: 2015
- EN 61000-3-2
- EN 61000-3-3
- EN 50130-4
- EN 55035: 2017
-
Obtained Certification:
- CE, FCC, IC, CB, KC, UL, RoHS, REACH, WEEE, RCM, UKCA, LOA, BIS
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
8-ch PoE 1U K Series AcuSense 4K NVR
- Up to 8-ch IP camera inputs, plug & play with 8 power-over-Ethernet (PoE) interfaces
- H.265+/H.265/H.264+/H.264 video formats
- Up to 1-ch@12 MP or 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity
- Up to 80 Mbps incoming bandwidth
- Adopt Hikvision Acusense technology to minimize manual effort and security costs
- 2TB Hard Drive
- Datasheet
Intelligent Analytics
-
AI by Device:
- Facial recognition
- Perimeter protection
- Motion detection 2.0
-
AI by Camera:
- Facial recognition
- Perimeter protection
- Throwing objects from building
- Motion detection 2.0
- ANPR
- VCA
Facial Recognition
-
Facial Detection and Analytics:
- Face picture comparison
- Human face capture
- Face picture search
-
Face Picture Library:
- Up to 16 face picture libraries
- Total of up to 20,000 face pictures (each picture ≤ 4 MB, total capacity ≤ 1 GB)
Facial Detection and Analytics Performance
- 1-ch, 8 MP
-
Face Picture Comparison
- 4-ch
Motion Detection 2.0
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
- 4-ch, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
- All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Perimeter Protection
-
By Device:
- 1-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarms
-
By Camera:
- All channels
Throwing Objects from Building
-
By Camera:
- All channels
Video and Audio
-
IP Video Input:
- 8-ch
-
Incoming Bandwidth:
- 80 Mbps
-
Outgoing Bandwidth:
- 80 Mbps
-
HDMI Output:
- 1-ch, 4K (3840 × 2160)/30 Hz
- 2K (2560 × 1440)/60 Hz
- 1920 × 1080/60 Hz
- 1600 × 1200/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
VGA Output:
- 1-ch, 1920 × 1080/60 Hz
- 1280 × 1024/60 Hz
- 1280 × 720/60 Hz
-
Video Output Mode:
- HDMI/VGA simultaneous output
- HDMI/VGA independent output
-
CVBS Output:
- N/A
-
Audio Output:
- 1-ch, RCA (Linear, 1 KΩ)
-
Two-Way Audio:
- 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
-
Decoding Format:
- H.265/H.265+/H.264+/H.264
-
Recording Resolution:
- 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
-
Synchronous Playback:
- 8-ch
-
Decoding Capability:
- AI on: 1-ch@12 MP (30 fps) / 1-ch@8 MP (30 fps) / 3-ch@4 MP (30 fps) / 6-ch@1080p (30 fps)
- AI off: 1-ch@12 MP (30 fps) / 2-ch@8 MP (30 fps) / 4-ch@4 MP (30 fps) / 8-ch@1080p (30 fps)
-
Stream Type:
- Video
- Video & Audio
-
Audio Compression:
- G.711ulaw / G.711alaw / G.722 / G.726 / AAC
Network
-
Remote Connection:
- 128
-
API:
- ONVIF (profile S/G)
- SDK
- ISAPI
-
Compatible Browser:
- IE11, Chrome V57, Firefox V52, Safari V12, Edge V89, or above version
-
Network Protocol:
- TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
-
Network Interface:
- 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
- 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface
-
PoE Interface:
- 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface
Power
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
Auxiliary Interface
-
SATA:
- 1 SATA interface
-
Capacity:
- Up to 10 TB capacity for each HDD
-
USB Interface:
- Front panel: 1 × USB 2.0
- Rear panel: 1 × USB 2.0
-
Alarm In/Out:
- 4/1; N/A; N/A; N/A (4/1 is optional)
General
-
GUI Language:
- English, Russian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Turkish, Japanese, Danish, Swedish, Norwegian, Finnish, Korean, Traditional Chinese, Thai, Estonian, Vietnamese, Croatian, Slovenian, Serbian, Latvian, Lithuanian, Uzbek, Kazakh, Arabic, Ukrainian, Kyrgyz, Brazilian Portuguese, Indonesian
-
Power Supply:
- 48 VDC, 1.875 A
-
Consumption:
- ≤ 10 W (without HDD, and PoE off)
-
Working Temperature:
- -10 °C to 55 °C (14 °F to 131 °F)
-
Working Humidity:
- 10% to 90%
-
Dimension (W × D × H):
- 320 mm × 240 mm × 48 mm (12.6" × 9.4" × 1.9")
-
Weight:
- ≤ 1 kg (without HDD, 2.2 lb.)
Certification
-
FCC:
- Part 15 Subpart B, ANSI C63.4-2014
-
CE:
- EN 55032: 2015
- EN 61000-3-2
- EN 61000-3-3
- EN 50130-4
- EN 55035: 2017
-
Obtained Certification:
- CE, FCC, IC, CB, KC, UL, RoHS, REACH, WEEE, RCM, UKCA, LOA, BIS
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
4-ch 1U 4K NVR
- H.265+/H.265/H.264+/H.264 video formats
- Up to 4-ch IP camera inputs
- Up to 4-ch@8 MP decoding capacity
- Up to 40 Mbps incoming bandwidth
- With 4TB Hard Drive
- Datasheet
Video and Audio
IP Video Input: 4 channels, Up to 32 MP resolution
Incoming Bandwidth: 40 Mbps
Outgoing Bandwidth: 80 Mbps
HDMI Output:
- 8K (7680 × 4320)/30Hz
- 4K (3840 × 2160)/30Hz
- 2K (2560 × 1440)/60Hz
- 1920 × 1080/60 Hz
VGA Output: 1920 × 1080/60 Hz
Video Output Mode: HDMI/VGA independent output
CVBS Output: Not Applicable (NA)
Audio Output: 1 channel, RCA (Linear, 1 KΩ)
Two-Way Audio: 1 channel, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
- Dual-Stream Recording: Supported
- Decoding Format: H.265+/H.265/H.264+/H.264
-
Decoding Capability:
- 4 channels at 8 MP (30 fps)
- 8 channels at 4 MP (30 fps)
- 16 channels at 1080p (30 fps)
- Synchronous Playback: 4 channels
-
Recording Resolution:
- 32 MP / 24 MP / 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP
- 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
- Stream Type: Video, Video & Audio
- Audio Compression: G.711ulaw / G.711alaw / G.722 / G.726 / AAC / MP2L2
Network
- Remote Connection: 128
- Network Protocol: TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
- Network Interface: 1 × RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
PoE
- Interface: 4 × RJ-45 10/100 Mbps self-adaptive Ethernet interface
- Power: ≤ 60 W
- Standard: IEEE 802.3 af/at
Auxiliary Interface
- SATA: 1 SATA interface
- Capacity: Up to 16 TB per HDD
- Alarm In/Out: 4/1
-
USB Interface:
- Front panel: 1 × USB 2.0
- Rear panel: 1 × USB 2.0
General
- Power Supply: 48 VDC, 1.875 A
- Consumption: ≤ 15 W (without HDD and PoE off)
- Working Temperature: -10 °C to 50 °C (14 °F to 122 °F)
- Working Humidity: 10% to 90%
- Dimensions (W × D × H): 320 × 240 × 48 mm (12.4" × 9.4" × 1.9")
- Weight: ≤ 1.2 kg (without HDD, 2.6 lb.)
Certification
-
CE
- EN 55032:2015 + A1:2020
- EN IEC61000-3-2:2019 + A1:2021
- EN 61000-3-3:2013 + A1:2021
- EN 50130-4:2011 + A1:2014
- EN 55035:2017 + A11:2020
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
4-ch 1U 4K NVR
- H.265+/H.265/H.264+/H.264 video formats
- Up to 4-ch IP camera inputs
- Up to 4-ch@8 MP decoding capacity
- Up to 40 Mbps incoming bandwidth
- With 4TB Hard Drive
- Datasheet
Video and Audio
IP Video Input: 4 channels, Up to 32 MP resolution
Incoming Bandwidth: 40 Mbps
Outgoing Bandwidth: 80 Mbps
HDMI Output:
- 8K (7680 × 4320)/30Hz
- 4K (3840 × 2160)/30Hz
- 2K (2560 × 1440)/60Hz
- 1920 × 1080/60 Hz
VGA Output: 1920 × 1080/60 Hz
Video Output Mode: HDMI/VGA independent output
CVBS Output: Not Applicable (NA)
Audio Output: 1 channel, RCA (Linear, 1 KΩ)
Two-Way Audio: 1 channel, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
- Dual-Stream Recording: Supported
- Decoding Format: H.265+/H.265/H.264+/H.264
-
Decoding Capability:
- 4 channels at 8 MP (30 fps)
- 8 channels at 4 MP (30 fps)
- 16 channels at 1080p (30 fps)
- Synchronous Playback: 4 channels
-
Recording Resolution:
- 32 MP / 24 MP / 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP
- 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
- Stream Type: Video, Video & Audio
- Audio Compression: G.711ulaw / G.711alaw / G.722 / G.726 / AAC / MP2L2
Network
- Remote Connection: 128
- Network Protocol: TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
- Network Interface: 1 × RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
PoE
- Interface: 4 × RJ-45 10/100 Mbps self-adaptive Ethernet interface
- Power: ≤ 60 W
- Standard: IEEE 802.3 af/at
Auxiliary Interface
- SATA: 1 SATA interface
- Capacity: Up to 16 TB per HDD
- Alarm In/Out: 4/1
-
USB Interface:
- Front panel: 1 × USB 2.0
- Rear panel: 1 × USB 2.0
General
- Power Supply: 48 VDC, 1.875 A
- Consumption: ≤ 15 W (without HDD and PoE off)
- Working Temperature: -10 °C to 50 °C (14 °F to 122 °F)
- Working Humidity: 10% to 90%
- Dimensions (W × D × H): 320 × 240 × 48 mm (12.4" × 9.4" × 1.9")
- Weight: ≤ 1.2 kg (without HDD, 2.6 lb.)
Certification
-
CE
- EN 55032:2015 + A1:2020
- EN IEC61000-3-2:2019 + A1:2021
- EN 61000-3-3:2013 + A1:2021
- EN 50130-4:2011 + A1:2014
- EN 55035:2017 + A11:2020
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
- Up to 12 MP resolution recording
- 4 x plug & play independent PoE interfaces
- 40Mbps throughput
- H.264, H.264+, H.265, H.265+, MPEG4 compression
- 1 SATA interface - up to 8TB storage
- Supports AcuSense, ColorVu, ANPR, people counting, thermal and heatmap cameras
- Human and vehicle search
- Hik-Connect P2P - quick remote access setup
- HDMI, VGA and CVBS video output
- Alarm I/O
Hikvision's HIK-7604NI-I1-4P is a 4-channel PoE network video recorder. This
NVR houses a powerful chipset and can run the same version 4 graphical user
interface (GUI) as the K-series. This brings this 4-channel NVR in line with the
rest of the I-series range of network video recorders. In addition to the new v4
GUI, this new 4ch I-Series NVR now fully supports AcuSense, ColorVu, ANPR,
people counting, thermal and heatmap cameras. installation,includes 1x3TB
HDD'
Spec of DS-7604NI-I1-4P
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty
- Up to 12 MP resolution recording
- 4 x plug & play independent PoE interfaces
- 40Mbps throughput
- H.264, H.264+, H.265, H.265+, MPEG4 compression
- 1 SATA interface - up to 8TB storage
- Supports AcuSense, ColorVu, ANPR, people counting, thermal and heatmap cameras
- Human and vehicle search
- Hik-Connect P2P - quick remote access setup
- HDMI, VGA and CVBS video output
- Alarm I/O
Hikvision's HIK-7604NI-I1-4P is a 4-channel PoE network video recorder. This
NVR houses a powerful chipset and can run the same version 4 graphical user
interface (GUI) as the K-series. This brings this 4-channel NVR in line with the
rest of the I-series range of network video recorders. In addition to the new v4
GUI, this new 4ch I-Series NVR now fully supports AcuSense, ColorVu, ANPR,
people counting, thermal and heatmap cameras. installation,includes 1x3TB
HDD'
Spec of DS-7604NI-I1-4P
Warranty: 3 Year Hikvision ANZ Manufacturer Warranty