Quick Order
Please allow 4-6 weeks lead time. Omni-directional WiFi antenna.
FEATURES:
- IEEE 802.11 a/h, frequency band: 5.15 to 5.875 GHz
- Wireless LAN / Wi-Fi WLAN
- Indoor and outdoor applications - IP67
- Pole/mast and wall mount
The Huber+Suhner Sencity 6dBi Omni WiFi Antenna, 5GHz randome comes in a grey-white colour and is made of polypropylene PORTS
| Port 1 | |
| Connector | N, jack (female) |
| Polarization | vertical |
| DC grounded | Yes |
Please allow 4-6 weeks lead time. Omni-directional WiFi antenna.
FEATURES:
- IEEE 802.11 a/h, frequency band: 5.15 to 5.875 GHz
- Wireless LAN / Wi-Fi WLAN
- Indoor and outdoor applications - IP67
- Pole/mast and wall mount
The Huber+Suhner Sencity 6dBi Omni WiFi Antenna, 5GHz randome comes in a grey-white colour and is made of polypropylene PORTS
| Port 1 | |
| Connector | N, jack (female) |
| Polarization | vertical |
| DC grounded | Yes |
Please allow 4-6 weeks lead time. Omni-directional WiFi stick antenna.
FEATURES:
- IEEE 802.11 b/g, frequency band 2.4 - 2.5 GHz
- WiFi wireless LAN / WLAN
- Gain 6 dBi, vertically polarized antenna
- Ingress protection IP 67 (IEC 60529)
- For outdoor and indoor applications
- Pole or wall mount
The Huber+Suhner Sencity 6dBi Omni WiFi Antenna, 2.4GHz radome comes in a signal white colour and is made of glass fibre PORTS
| Port 1 | |
| Connector | N, jack (female) |
| Polarization | vertical |
| DC grounded | No |
Please allow 4-6 weeks lead time. Omni-directional WiFi stick antenna.
FEATURES:
- IEEE 802.11 b/g, frequency band 2.4 - 2.5 GHz
- WiFi wireless LAN / WLAN
- Gain 6 dBi, vertically polarized antenna
- Ingress protection IP 67 (IEC 60529)
- For outdoor and indoor applications
- Pole or wall mount
The Huber+Suhner Sencity 6dBi Omni WiFi Antenna, 2.4GHz radome comes in a signal white colour and is made of glass fibre PORTS
| Port 1 | |
| Connector | N, jack (female) |
| Polarization | vertical |
| DC grounded | No |
The GME AT4705BATP 4G Heavy Duty Multi-band Cellular Antenna Twin Pack is the newest addition to the GME AE4700 series of fiberglass radome antennas. This Heavy Duty Multi-Band Cellular Antenna Twin Pack is Australian designed and manufactured to meet the tough conditions of the Australian outback. The AT4704BA and AT4705BA are Multi-Band cellular antennas, designed to deliver optimal performance on the 4G LTE networks found around the fringes of rural areas. This antenna includes a combination of a shorter length whip with lower gain for mountainous terrain or built-up areas, and a longer length whip with higher gain for traveling on open roads or flat terrain. GME has a specialized design team with the ability to develop application-specific antenna products. With a purpose-built facility based in Sydney, GME continues ongoing commitment and dedication to local Australian manufacturing. Local manufacturing ensures GME is able to produce the highest quality communications equipment tailored to the harsh Australian landscape.
GME AT4705BATP 4G Heavy Duty Multi-band Cellular Antenna Twin Pack
FEATURES:
- Interchangeable whips
- Black Fibreglass Radome
- Heavy Duty Spring Base
- Detachable whip
- Ground independent design
- Pre-terminated SMA connection
- Covers 700, 850. 900 & 1800-2100MHz cellular bands
- AW4704BCEL - 2.5dBi (700-900MHz)
- AW4705BCEL - 7dBi (700-900MHz)
INCLUDED IN THE BOX:
- Antenna Whip (AW4704BCEL)
- Antenna Whip (AW4705BCEL)
- Heavy Duty Spring Base & Lead Assembly - SMA Connector (AS004B5CEL)
The GME AT4705BATP 4G Heavy Duty Multi-band Cellular Antenna Twin Pack is the newest addition to the GME AE4700 series of fiberglass radome antennas. This Heavy Duty Multi-Band Cellular Antenna Twin Pack is Australian designed and manufactured to meet the tough conditions of the Australian outback. The AT4704BA and AT4705BA are Multi-Band cellular antennas, designed to deliver optimal performance on the 4G LTE networks found around the fringes of rural areas. This antenna includes a combination of a shorter length whip with lower gain for mountainous terrain or built-up areas, and a longer length whip with higher gain for traveling on open roads or flat terrain. GME has a specialized design team with the ability to develop application-specific antenna products. With a purpose-built facility based in Sydney, GME continues ongoing commitment and dedication to local Australian manufacturing. Local manufacturing ensures GME is able to produce the highest quality communications equipment tailored to the harsh Australian landscape.
GME AT4705BATP 4G Heavy Duty Multi-band Cellular Antenna Twin Pack
FEATURES:
- Interchangeable whips
- Black Fibreglass Radome
- Heavy Duty Spring Base
- Detachable whip
- Ground independent design
- Pre-terminated SMA connection
- Covers 700, 850. 900 & 1800-2100MHz cellular bands
- AW4704BCEL - 2.5dBi (700-900MHz)
- AW4705BCEL - 7dBi (700-900MHz)
INCLUDED IN THE BOX:
- Antenna Whip (AW4704BCEL)
- Antenna Whip (AW4705BCEL)
- Heavy Duty Spring Base & Lead Assembly - SMA Connector (AS004B5CEL)
The GME AE4705B UHF 1200mm Heavy Duty Fibreglass Radome Antenna is the ultimate choice for your UHF CB communication needs. Designed for resilience and performance, this antenna system comes with a range of spring bases and user-interchangeable whips to cater to your specific requirements.
Featuring a sleek and durable black Fibreglass Radome, the AE4705B is not only aesthetically pleasing but also built to withstand tough conditions. The heavy-duty spring base ensures stability and longevity, making it suitable for both on and off-road adventures.
AE4705B Key Features:
- Black Fibreglass Radome
- Heavy Duty Spring Base
- Interchangeable Whip
- Ground Independent Design
- Pre-terminated FME Connector
- 6.6dBi Gain
- Length: 1200mm
One of the standout features of this antenna system is its interchangeability, allowing you to easily customize the whip to achieve the desired performance. The ground-independent design further enhances signal strength and transmission quality, ensuring clear communication at all times.
Equipped with a pre-terminated FME connector for convenient installation, the AE4705B boasts an impressive 6.6dBi gain, guaranteeing reliable long-distance communication. With a length of 1200mm, this antenna provides optimal coverage to meet your communication needs efficiently.
Unboxing the AE4705B reveals essential components such as the 6.6dBi antenna whip, heavy-duty spring base, 4.5m lead assembly, and an FME -> PL259 adaptor, making it a comprehensive and user-friendly UHF antenna solution.
Whether you're exploring the great outdoors or navigating urban landscapes, the GME AE4705B UHF Antenna is a reliable companion for seamless communication. Experience the power of superior signal quality and robust construction with this exceptional antenna system.
The GME AE4705B UHF 1200mm Heavy Duty Fibreglass Radome Antenna is the ultimate choice for your UHF CB communication needs. Designed for resilience and performance, this antenna system comes with a range of spring bases and user-interchangeable whips to cater to your specific requirements.
Featuring a sleek and durable black Fibreglass Radome, the AE4705B is not only aesthetically pleasing but also built to withstand tough conditions. The heavy-duty spring base ensures stability and longevity, making it suitable for both on and off-road adventures.
AE4705B Key Features:
- Black Fibreglass Radome
- Heavy Duty Spring Base
- Interchangeable Whip
- Ground Independent Design
- Pre-terminated FME Connector
- 6.6dBi Gain
- Length: 1200mm
One of the standout features of this antenna system is its interchangeability, allowing you to easily customize the whip to achieve the desired performance. The ground-independent design further enhances signal strength and transmission quality, ensuring clear communication at all times.
Equipped with a pre-terminated FME connector for convenient installation, the AE4705B boasts an impressive 6.6dBi gain, guaranteeing reliable long-distance communication. With a length of 1200mm, this antenna provides optimal coverage to meet your communication needs efficiently.
Unboxing the AE4705B reveals essential components such as the 6.6dBi antenna whip, heavy-duty spring base, 4.5m lead assembly, and an FME -> PL259 adaptor, making it a comprehensive and user-friendly UHF antenna solution.
Whether you're exploring the great outdoors or navigating urban landscapes, the GME AE4705B UHF Antenna is a reliable companion for seamless communication. Experience the power of superior signal quality and robust construction with this exceptional antenna system.
Using the time-tested, rugged, mechanical design of the AE4700 series of UHF antennas in conjunction with an innovative PCB electrical circuit, the AT4705B sets a new benchmark for multiband cellular antennas in the Australian market. This high performance and extremely durable 4G antenna provides long range connectivity across all mobile networks, Australia and abroad. It is designed as an identical twin to the highly popular AE4700 UHF bullbar antenna.
GME AT4705B Features:
- 7 dBi gain across 698 to 960 MHz
- 2.5 dBi gain across 1695 to 2200 MHz
- Uses the proven and rugged mechanical design of GME’s AE4700 Series UHF antennas
- Extra heavy-duty spring, ideal for bull bar mount
- Included is 4.8m of low-loss coaxial cable with SMA/M connector
- Ground Independent Design
- Antenna Length: 120 cm
Covering the 700MHz, 850MHz, 900Mhz and 1800-2100MHz bands, the AT4705B is a true Multi-band cellular antenna. The AT4705B delivers excellent LTE coverage across existing mobile phone networks. This ensures that you always remain connected, even in areas with limited or poor cellular network coverage. This antenna provides consistent 7 dBi gain across its long range band. This is the ideal peak gain figure for moving vehicles and machinery. For short range high speed data applications the antenna has an upper 1695 to 2200 MHz band in support of LTE-Advanced carrier aggregation.
Using the time-tested, rugged, mechanical design of the AE4700 series of UHF antennas in conjunction with an innovative PCB electrical circuit, the AT4705B sets a new benchmark for multiband cellular antennas in the Australian market. This high performance and extremely durable 4G antenna provides long range connectivity across all mobile networks, Australia and abroad. It is designed as an identical twin to the highly popular AE4700 UHF bullbar antenna.
GME AT4705B Features:
- 7 dBi gain across 698 to 960 MHz
- 2.5 dBi gain across 1695 to 2200 MHz
- Uses the proven and rugged mechanical design of GME’s AE4700 Series UHF antennas
- Extra heavy-duty spring, ideal for bull bar mount
- Included is 4.8m of low-loss coaxial cable with SMA/M connector
- Ground Independent Design
- Antenna Length: 120 cm
Covering the 700MHz, 850MHz, 900Mhz and 1800-2100MHz bands, the AT4705B is a true Multi-band cellular antenna. The AT4705B delivers excellent LTE coverage across existing mobile phone networks. This ensures that you always remain connected, even in areas with limited or poor cellular network coverage. This antenna provides consistent 7 dBi gain across its long range band. This is the ideal peak gain figure for moving vehicles and machinery. For short range high speed data applications the antenna has an upper 1695 to 2200 MHz band in support of LTE-Advanced carrier aggregation.
The GME AT4704BA 4G Spring-Mount Bullbar Antenna is a reliable and rugged antenna designed to provide exceptional multi-band cellular coverage in the Australian market. With a focus on innovation and performance, this antenna utilizes a combination of a durable mechanical design borrowed from the AE4700 series and an advanced PCB electrical circuit.
Covering an extensive range of frequencies from 700MHz to 2200MHz, including crucial bands like 700MHz, 850MHz, 900MHz, and 1800-2100MHz, the AT4704BA stands out as a true multi-band cellular antenna. This means that you can enjoy seamless LTE coverage across various mobile phone networks, ensuring reliable connectivity even in areas with challenging network conditions.
GME AT4704BA Key Features:
- Black Fibreglass Radome
- Heavy Duty Spring Base
- Ground Independent Design
- Pre-terminated SMA Connector
- Covers 700, 850, 900, 1800-2100MHz
- 2.5 - 5 dBi Gain
- Length: 580mm
The features of the GME AT4704BA antenna make it a standout choice for those seeking a robust and high-performance solution. With a heavy-duty spring base for stability and durability, a ground-independent design for optimal signal reception, and a pre-terminated SMA connector for easy installation, this antenna is built for excellence.
Additionally, the antenna offers a gain ranging from 2.5 to 5 dBi, ensuring strong signal strength, and comes with a length of 580mm, housed in a sleek black fibreglass radome for added protection.
In the box, you will find the multi-band cellular antenna whip, along with the heavy-duty spring base and lead assembly featuring an SMA connector, providing you with everything you need to set up and start enjoying enhanced cellular coverage with the GME AT4704BA 4G Spring-Mount Bullbar Antenna.
The GME AT4704BA 4G Spring-Mount Bullbar Antenna is a reliable and rugged antenna designed to provide exceptional multi-band cellular coverage in the Australian market. With a focus on innovation and performance, this antenna utilizes a combination of a durable mechanical design borrowed from the AE4700 series and an advanced PCB electrical circuit.
Covering an extensive range of frequencies from 700MHz to 2200MHz, including crucial bands like 700MHz, 850MHz, 900MHz, and 1800-2100MHz, the AT4704BA stands out as a true multi-band cellular antenna. This means that you can enjoy seamless LTE coverage across various mobile phone networks, ensuring reliable connectivity even in areas with challenging network conditions.
GME AT4704BA Key Features:
- Black Fibreglass Radome
- Heavy Duty Spring Base
- Ground Independent Design
- Pre-terminated SMA Connector
- Covers 700, 850, 900, 1800-2100MHz
- 2.5 - 5 dBi Gain
- Length: 580mm
The features of the GME AT4704BA antenna make it a standout choice for those seeking a robust and high-performance solution. With a heavy-duty spring base for stability and durability, a ground-independent design for optimal signal reception, and a pre-terminated SMA connector for easy installation, this antenna is built for excellence.
Additionally, the antenna offers a gain ranging from 2.5 to 5 dBi, ensuring strong signal strength, and comes with a length of 580mm, housed in a sleek black fibreglass radome for added protection.
In the box, you will find the multi-band cellular antenna whip, along with the heavy-duty spring base and lead assembly featuring an SMA connector, providing you with everything you need to set up and start enjoying enhanced cellular coverage with the GME AT4704BA 4G Spring-Mount Bullbar Antenna.
Stock dispatch times range from 3 to 5 business days (depending on availability and order volumes)
The AE4707B is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips.
FEATURES:
- Black Fibreglass Radome
- Medium Duty Spring Base
- Interchangeable Whip
- Ground Independent Design
- Pre-terminated FME Connector
- 2.1dBi Gain
- Length: 595mm
IN THE BOX
- 2.1dBi Antenna Whip
- Medium Duty Spring Base
- 4.5m Lead Assembly
- FME -> PL259 Adaptor
Stock dispatch times range from 3 to 5 business days (depending on availability and order volumes)
The AE4707B is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips.
FEATURES:
- Black Fibreglass Radome
- Medium Duty Spring Base
- Interchangeable Whip
- Ground Independent Design
- Pre-terminated FME Connector
- 2.1dBi Gain
- Length: 595mm
IN THE BOX
- 2.1dBi Antenna Whip
- Medium Duty Spring Base
- 4.5m Lead Assembly
- FME -> PL259 Adaptor
Stock dispatch times range from 3 to 5 business days (depending on availability and order volumes)
GME’s range of elevated-feed UHF CB radio antennas provide a gain of 6.6 dBi for a great all-round performing antenna. The elevated feed-design helps raise the radiating element above the vehicle roof or other obstructions to provide a strong, omni-directional pattern and high performance when mounted on a vehicle gutter, fender or bull bar. These antennas are a popular choice for 4WDs and fleet vehicles.
FEATURES:
- Elevated-Feed Base
- Fibreglass Whip with Black Heat Shrink
- Barrel Style Stainless Steel Spring (Black)
- Heavy Duty Braid Copper Element
- Ground Independent Design
- Pre-terminated FME Connector
- 6.6dBi Gain
- Length: 970mm
IN THE BOX
- 6.6dBi Antenna Whip
- Elevated-Feed Base & Lead Assembly
- Medium Duty Spring
- FME -> PL259 Adaptor
Stock dispatch times range from 3 to 5 business days (depending on availability and order volumes)
GME’s range of elevated-feed UHF CB radio antennas provide a gain of 6.6 dBi for a great all-round performing antenna. The elevated feed-design helps raise the radiating element above the vehicle roof or other obstructions to provide a strong, omni-directional pattern and high performance when mounted on a vehicle gutter, fender or bull bar. These antennas are a popular choice for 4WDs and fleet vehicles.
FEATURES:
- Elevated-Feed Base
- Fibreglass Whip with Black Heat Shrink
- Barrel Style Stainless Steel Spring (Black)
- Heavy Duty Braid Copper Element
- Ground Independent Design
- Pre-terminated FME Connector
- 6.6dBi Gain
- Length: 970mm
IN THE BOX
- 6.6dBi Antenna Whip
- Elevated-Feed Base & Lead Assembly
- Medium Duty Spring
- FME -> PL259 Adaptor
Meticulously designed for 4WD, agriculture, and heavy vehicles. Its ground-independent, 915mm lightweight construction offers versatile mounting on brackets or bull bars. With a potent 6.6dBi gain, it excels in all-round performance. Convenience is further enhanced by a 4.5m pre-terminated coax cable with an FME connection, facilitating swift installation and seamless connection to UHF CB radios. Developed by GME's design team, it underscores their commitment to local Australian manufacturing for top-tier communications in the harsh Australian landscape.
Introducing the AE3700B UHF CB antenna, tailored for various users like 4WD, agriculture, and heavy vehicles. Here's why it's a top choice:
-
Versatile Design:
Ground-independent, lightweight, and a 915mm length suitable for bracket or bull bar mounting. -
Optimal Performance:
Boasting a 6.6dBi gain, ensuring exceptional all-round performance. -
Easy Installation:
Fitted with a 4.5-metre pre-terminated coax cable featuring an FME connection, facilitating quick setup with your UHF CB radio.
GME's exceptional features:
-
Local Commitment:
GME's design team ensures application-specific products for the Australian market. -
Quality Manufacturing:
GME's local production guarantees top-tier communications equipment suited to the rugged Australian landscape.
Key Features:
- Made in Australia
- 16mm Parallel Black Fibreglass Radome
- Medium Duty Spring Base
- Ground Independent Design
- Pre-terminated FME Connection
- Nominal Gain - 6.6 dBi
- Length: 915mm
Meticulously designed for 4WD, agriculture, and heavy vehicles. Its ground-independent, 915mm lightweight construction offers versatile mounting on brackets or bull bars. With a potent 6.6dBi gain, it excels in all-round performance. Convenience is further enhanced by a 4.5m pre-terminated coax cable with an FME connection, facilitating swift installation and seamless connection to UHF CB radios. Developed by GME's design team, it underscores their commitment to local Australian manufacturing for top-tier communications in the harsh Australian landscape.
Introducing the AE3700B UHF CB antenna, tailored for various users like 4WD, agriculture, and heavy vehicles. Here's why it's a top choice:
-
Versatile Design:
Ground-independent, lightweight, and a 915mm length suitable for bracket or bull bar mounting. -
Optimal Performance:
Boasting a 6.6dBi gain, ensuring exceptional all-round performance. -
Easy Installation:
Fitted with a 4.5-metre pre-terminated coax cable featuring an FME connection, facilitating quick setup with your UHF CB radio.
GME's exceptional features:
-
Local Commitment:
GME's design team ensures application-specific products for the Australian market. -
Quality Manufacturing:
GME's local production guarantees top-tier communications equipment suited to the rugged Australian landscape.
Key Features:
- Made in Australia
- 16mm Parallel Black Fibreglass Radome
- Medium Duty Spring Base
- Ground Independent Design
- Pre-terminated FME Connection
- Nominal Gain - 6.6 dBi
- Length: 915mm