Products
The unit's integrated 23 dBi antenna provides high speed connectivity out to about 10 to 15 kilometres, although this is of course dependent on the required data rate and tolerated latency / jitter performance metrics.
The unit's integrated 23 dBi antenna provides high speed connectivity out to about 10 to 15 kilometres, although this is of course dependent on the required data rate and tolerated latency / jitter performance metrics.
The Cambium ePMP 3000 4x4 MU-MIMO Sector Antenna, 17 dBi, 90° is integrated into Cambium Networks LINKPlanner. The 3D model shows coverage at all elevations and across the azimuth giving it Predictable Performance.
The Cambium ePMP 3000 4x4 MU-MIMO Sector Antenna, 17 dBi, 90° is integrated into Cambium Networks LINKPlanner. The 3D model shows coverage at all elevations and across the azimuth giving it Predictable Performance.
Cambium's N009045D003A is a medium gain dual-slant polarised yagi antenna designed for use with the PMP and PTP 450 900 MHz radio series. The antenna provides a modest 12 dBi peak gain which meets the needs of most point-to-point and point-to-multipoint wireless links, while maintaining a reasonably compact size. The antenna is dual-slant polarised to provide effective 2x2 MIMO. Two short cable tails with RP-SMA Male connectors provide easy connectivity to the 450 900 MHz radio.
FEATURES:
- 12 dBi Peak Gain
- Covers full 900 to 930 MHz ISM frequency range
- Dual polarised 2x2 MIMO
- Included mounting bracket and cables for PTP/PMP 450 900 MHz radios.
With a 1.7:1 VSWR, minimal spatial separation, and lightweight aluminium construction, industrial deployments may benefit from talking to our team about creating a more optimised deployment.
Cambium's N009045D003A is a medium gain dual-slant polarised yagi antenna designed for use with the PMP and PTP 450 900 MHz radio series. The antenna provides a modest 12 dBi peak gain which meets the needs of most point-to-point and point-to-multipoint wireless links, while maintaining a reasonably compact size. The antenna is dual-slant polarised to provide effective 2x2 MIMO. Two short cable tails with RP-SMA Male connectors provide easy connectivity to the 450 900 MHz radio.
FEATURES:
- 12 dBi Peak Gain
- Covers full 900 to 930 MHz ISM frequency range
- Dual polarised 2x2 MIMO
- Included mounting bracket and cables for PTP/PMP 450 900 MHz radios.
With a 1.7:1 VSWR, minimal spatial separation, and lightweight aluminium construction, industrial deployments may benefit from talking to our team about creating a more optimised deployment.
Cambium Networks C050045B002B 5 GHz PTP 450i END, Integrated High Gain Antenna (ROW) FEATURES: An ultra-wide band radio supports 4900 MHz to 5925 MHz with dynamic interference filtering, improved transmit power,
Cambium Networks C050045B002B 5 GHz PTP 450i END, Integrated High Gain Antenna (ROW) FEATURES: An ultra-wide band radio supports 4900 MHz to 5925 MHz with dynamic interference filtering, improved transmit power,
Cambium's N000065L031A bracket is an upgraded heavy duty mounting bracket for the Cambium PTP 450i, 550, 650, and 670 series of wireless radios. It is suitable for the integrated radio form factor.
Cambium's N000065L031A bracket is an upgraded heavy duty mounting bracket for the Cambium PTP 450i, 550, 650, and 670 series of wireless radios. It is suitable for the integrated radio form factor.
Cambium Networks N000045L002A Tilt Bracket Assembly has a low profile bracket that provides elevation adjustment with the PMP/PTP 450i integrated ODUs of +10º to -5º or +5º to -10º . A larger adjustment range is available using the standard integrat…
Cambium Networks N000045L002A Tilt Bracket Assembly has a low profile bracket that provides elevation adjustment with the PMP/PTP 450i integrated ODUs of +10º to -5º or +5º to -10º . A larger adjustment range is available using the standard integrat…
Andrew VHLP2-80 Single-Pol mmWave Antenna, 0.6 m 2 ft Dish, 71 to 86 GHz FEATURES Single polarised 0.6 metre diameter parabolic dish 50 dBi nominal gain R740 UG-387 waveguide flange interface
Andrew VHLP2-80 Single-Pol mmWave Antenna, 0.6 m 2 ft Dish, 71 to 86 GHz FEATURES Single polarised 0.6 metre diameter parabolic dish 50 dBi nominal gain R740 UG-387 waveguide flange interface
Cambium Networks N800082L004A PTP 820E Flat Antenna Mounting kit
Cambium Networks N800082L004A PTP 820E Flat Antenna Mounting kit
Cambium Networks PTP 820 3' ANT, SP,18GHz, RFU-C TYPE & Std UBR220 - Andrew
Cambium Networks PTP 820 3' ANT, SP,18GHz, RFU-C TYPE & Std UBR220 - Andrew
Experience high-performance connectivity with the Cambium PTP 820 1' ANT,SP,80GHz, RFU-E TYPE & UG387 by Cambium Networks. Reliable, fast, and efficient for your networking needs.
Experience high-performance connectivity with the Cambium PTP 820 1' ANT,SP,80GHz, RFU-E TYPE & UG387 by Cambium Networks. Reliable, fast, and efficient for your networking needs.
Cambium Networks' Cambium PTP 820 2' ANT SP 11GHz Andrew offers reliable and high-performance connectivity. Enhance your network with this advanced solution.
Cambium Networks' Cambium PTP 820 2' ANT SP 11GHz Andrew offers reliable and high-performance connectivity. Enhance your network with this advanced solution.
High-performance Cambium RDH4503C 2-FT Dual-Pol Dish Antenna, N Female connector. Covers 4.9 to 6 GHz. From trusted brand Cambium Networks for reliable wireless connectivity.
High-performance Cambium RDH4503C 2-FT Dual-Pol Dish Antenna, N Female connector. Covers 4.9 to 6 GHz. From trusted brand Cambium Networks for reliable wireless connectivity.
- Category 6A
- Unshielded
- 28awg BC
- Slim Type
- Category 6A
- Unshielded
- 28awg BC
- Slim Type
Features:
- 100% copper wires and a Category 6 compliant RJ connector with a T568A configuration are installed.
- Improved performance with impedance-matched wire and connections
- Outer jacket that is strong and flexible
- Strain-relief boot that is fully moulded
- Reduced plug/socket damage thanks to snag avoidance design
- Compliant with Category 6 of ISO/IEC 11801 and TIA/EIA-568-C.2
Features:
- 100% copper wires and a Category 6 compliant RJ connector with a T568A configuration are installed.
- Improved performance with impedance-matched wire and connections
- Outer jacket that is strong and flexible
- Strain-relief boot that is fully moulded
- Reduced plug/socket damage thanks to snag avoidance design
- Compliant with Category 6 of ISO/IEC 11801 and TIA/EIA-568-C.2
Features:
- Stranded Core
- Gigabit Ethernet Compliant
- ACA Compliant
- 8-pin RJ45 connections on both ends
- 100% Performance tested Utilizable as CAT5 or CAT5e
Features:
- Stranded Core
- Gigabit Ethernet Compliant
- ACA Compliant
- 8-pin RJ45 connections on both ends
- 100% Performance tested Utilizable as CAT5 or CAT5e
Features:
-
- 100% pure copper conductors, Category 6 compliant RJ plug, and T568A configuration.
- For optimum performance, use wire and connections that are impedance matched.
- Flexible and strong outerwear.
- Completely moulded strain-relieving boot.
- Plug/socket damage is reduced by a snag-prevention design.
- Compliant with TIA/EIA-568-C.2 Category 6 and ISO/IEC 11801.
Features:
-
- 100% pure copper conductors, Category 6 compliant RJ plug, and T568A configuration.
- For optimum performance, use wire and connections that are impedance matched.
- Flexible and strong outerwear.
- Completely moulded strain-relieving boot.
- Plug/socket damage is reduced by a snag-prevention design.
- Compliant with TIA/EIA-568-C.2 Category 6 and ISO/IEC 11801.
Features:
- 0.5m CAT6 Ethernet Cable | CAT6 Patch Lead
- Unshielded Twisted Pair (UTP)
- Pre-terminated with male RJ45 8P8C plugs
- Locking spring-pin for rigid connections
- Also known as: CAT6, RJ45 Cable, Ethernet Cable, LAN Cable, Network Cable
- 24AWG Standard Bare Copper (7/0.20)
- ANSI/TIA-568-C.2 Category 6 Performance
- RCM CA/AS 2008:2010 Compliant
- Telstra Network fully compliant
- Wired to the T568A standard
- For Gigabit network connections via switch, router or modem
- This length is available in Six Colours; Black, Blue, Red, Green, Yellow & White
- Colour: Blue
Features:
- 0.5m CAT6 Ethernet Cable | CAT6 Patch Lead
- Unshielded Twisted Pair (UTP)
- Pre-terminated with male RJ45 8P8C plugs
- Locking spring-pin for rigid connections
- Also known as: CAT6, RJ45 Cable, Ethernet Cable, LAN Cable, Network Cable
- 24AWG Standard Bare Copper (7/0.20)
- ANSI/TIA-568-C.2 Category 6 Performance
- RCM CA/AS 2008:2010 Compliant
- Telstra Network fully compliant
- Wired to the T568A standard
- For Gigabit network connections via switch, router or modem
- This length is available in Six Colours; Black, Blue, Red, Green, Yellow & White
- Colour: Blue
Features:
- Connector:(2) RJ45
- Cable Type: Cat6
- Max Data Rate: 1Gbps
- Insulation: UTP
- Cable Length: 1 m
- Conductor: Copper Clad Aluminium
- Color: Black
- Environment: Indoor
Features:
- Connector:(2) RJ45
- Cable Type: Cat6
- Max Data Rate: 1Gbps
- Insulation: UTP
- Cable Length: 1 m
- Conductor: Copper Clad Aluminium
- Color: Black
- Environment: Indoor
Features:
- The RJ45 connectors of the Tekcart 2m CAT6 Cable are equipped with internal load bars and 50-micron gold-plated connectors for clear signal reception
- Built from Unshielded Twisted Pair (UTP) wires, this cable meets the CAT6 standard and supports Ethernet speeds of up to 1 gigabit per second
- The Tekcart CAT6 Patch Cable's wires are housed in a PVC outer jacket. It also features a design, helping prevent breaking and cracking over extensive use
- To help reduce crosstalk and electromagnetic interference, this Ethernet Patch Cable comes with 4 UTP 24 AWG (American Wire Gauge) stranded copper wires
Specifications:
| Type | Patch cable - CAT 6 |
| Technology | Shielded foiled twisted pair (SFTP) |
| Shielding Material | Copper |
| Features | Molded, snagless |
| Length | 2 m |
| Connector | RJ-45 - male |
| Connector (Second End) | RJ-45 - male |
| Color | Blue |
| Fiber Connector Size | / 50 micron |
| Network Cable Type | Patch cable - CAT 6 |
| Plated Connector | Gold |
| Compliant Standards | EMI |
Features:
- The RJ45 connectors of the Tekcart 2m CAT6 Cable are equipped with internal load bars and 50-micron gold-plated connectors for clear signal reception
- Built from Unshielded Twisted Pair (UTP) wires, this cable meets the CAT6 standard and supports Ethernet speeds of up to 1 gigabit per second
- The Tekcart CAT6 Patch Cable's wires are housed in a PVC outer jacket. It also features a design, helping prevent breaking and cracking over extensive use
- To help reduce crosstalk and electromagnetic interference, this Ethernet Patch Cable comes with 4 UTP 24 AWG (American Wire Gauge) stranded copper wires
Specifications:
| Type | Patch cable - CAT 6 |
| Technology | Shielded foiled twisted pair (SFTP) |
| Shielding Material | Copper |
| Features | Molded, snagless |
| Length | 2 m |
| Connector | RJ-45 - male |
| Connector (Second End) | RJ-45 - male |
| Color | Blue |
| Fiber Connector Size | / 50 micron |
| Network Cable Type | Patch cable - CAT 6 |
| Plated Connector | Gold |
| Compliant Standards | EMI |
Features:
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
Features:
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant