4G & 5G Routers
Stay connected anywhere with a 4G or 5G router from Tekcart. Our cellular routers insert a SIM card and deliver reliable broadband connectivity — ideal for remote sites, temporary offices, vehicles, caravans, and as a fixed NBN alternative.
We stock Teltonika, Peplink, and TP-Link 4G/5G routers with enterprise features including dual-SIM failover, VPN, remote management, and rugged builds for outdoor deployments. Supports all Australian carriers.
The Blackhawk Omni Trucker Edge Compact LITE at 60 cm will provide the perfect solution for voice and data applications. It is lighter in weight than its sister antenna the Trucker Edge Compact, weighing only 1.2 kg. The new design includes a smaller barrel which helps reduce weight and minimises vibration and subsequent damage caused by driving on corrugated roads found in remote and harsh environments.
Trucker Edge Compact LITE Feautres:
- 5G Ready*
- Streamline in design and light in weight
- Ruggedized construction for extreme conditions.
- Can be mounted to car bonnet or bullbar
- Supplied with 4 m of PT240 LSHF ultra-flex cable with a pre-fitted SMA male connector
* 5G via Dynamic Spectrum Sharing (DSS) on compatible repeaters including the CEL-FI R41.
This premium grade antenna will satisfy 3G, 4G, and 5G via DSS capabilities for all the major networks in Australia and can be used for commercial and industrial applications.
The Blackhawk Omni Trucker Edge Compact LITE at 60 cm will provide the perfect solution for voice and data applications. It is lighter in weight than its sister antenna the Trucker Edge Compact, weighing only 1.2 kg. The new design includes a smaller barrel which helps reduce weight and minimises vibration and subsequent damage caused by driving on corrugated roads found in remote and harsh environments.
Trucker Edge Compact LITE Feautres:
- 5G Ready*
- Streamline in design and light in weight
- Ruggedized construction for extreme conditions.
- Can be mounted to car bonnet or bullbar
- Supplied with 4 m of PT240 LSHF ultra-flex cable with a pre-fitted SMA male connector
* 5G via Dynamic Spectrum Sharing (DSS) on compatible repeaters including the CEL-FI R41.
This premium grade antenna will satisfy 3G, 4G, and 5G via DSS capabilities for all the major networks in Australia and can be used for commercial and industrial applications.
The Blackhawk Trucker EDGE Compact Antenna – 4/6dBi is ideal for all carrier bands Telstra, Optus and Vodafone 3G/ 4G.
Future-proof your vehicle installations with this high grade, ruggedized Omni Trucker Antenna. This premium-grade cellular antenna will satisfy 3G and 4G capabilities for all the major networks in Australia and can be used for commercial and industrial 3G and 4G applications.
Trucker EDGE Compact Features:
- 5G Ready*
- 4 dBi gain across lower bands 698-960 MHz
- 6 dBi gain across upper bands 1710-2170 MHz
- Can be mounted directly on a bullbar
- Suitable for all mobile carriers
- Included is 4 metres of LMR240 Ultra Flex cable fitted with SMA/M connector
- Made of ruggedized fibreglass to withstand 210km/h winds
- Bracket additional
*5G via Dynamic Spectrum Sharing (DSS) on compatible repeaters including the CEL-FI R41.
The Blackhawk Omni Trucker Edge Compact at 68cm will provide the perfect solution for voice and data applications where high gain antennas are required while on the move. Combine with a CEL-FI ROAM in your vehicle to never be out of contact when away from home.
The Blackhawk Trucker EDGE Compact Antenna – 4/6dBi is ideal for all carrier bands Telstra, Optus and Vodafone 3G/ 4G.
Future-proof your vehicle installations with this high grade, ruggedized Omni Trucker Antenna. This premium-grade cellular antenna will satisfy 3G and 4G capabilities for all the major networks in Australia and can be used for commercial and industrial 3G and 4G applications.
Trucker EDGE Compact Features:
- 5G Ready*
- 4 dBi gain across lower bands 698-960 MHz
- 6 dBi gain across upper bands 1710-2170 MHz
- Can be mounted directly on a bullbar
- Suitable for all mobile carriers
- Included is 4 metres of LMR240 Ultra Flex cable fitted with SMA/M connector
- Made of ruggedized fibreglass to withstand 210km/h winds
- Bracket additional
*5G via Dynamic Spectrum Sharing (DSS) on compatible repeaters including the CEL-FI R41.
The Blackhawk Omni Trucker Edge Compact at 68cm will provide the perfect solution for voice and data applications where high gain antennas are required while on the move. Combine with a CEL-FI ROAM in your vehicle to never be out of contact when away from home.
The Powertec Trucker Edge Antenna is designed to provide optimal gain across 3G, 4G and 5G via DSS bands used when travelling throughout Australia & abroad. This powerful bullbar antenna provides the optimum 6 dBi gain, providing best performance in both flat remote areas and when travelling amongst hills and tall trees.
As a bullbar mounted antenna the Trucker Edge sports an extra-heavy-duty stainless-steel bell-spring for rough corrugations and a strong tapered fibreglass radome that provides consistent radiative performance in all directions. The antenna has a 4.5 metre PTL-240 Ultra-Flex cable which is an industry-standard for high vibration mining machinery and industrial plant and provides the lowest per-metre loss of all similar sized coaxial cables.
The antenna has been optimised for the cellular Low Band (700 to 960 MHz) which is used by all network operators as the primary band for voice & data services. With the coming 3G switch-off, Trucker Edge is built ready for 5G (NR850).
This antenna has been developed by the Powertec team as the ideal companion for CEL-FI ROAM. The antenna is supplied pre-terminated and pre-tuned, simply unpack and go.
Trucker Edge Features:
- 5G Ready*
- Optimum 6 dBi gain for flat and hilly areas
- Extra heavy-duty stainless steel spring
- High-vibration PTL-240 Ultra-Flex cabling
- 4.5 metres of cable with an industry-standard SMA Male connector.
*5G via Dynamic Spectrum Sharing (DSS) on compatible repeaters including the CEL-FI R41.
The Powertec Trucker Edge Antenna is designed to provide optimal gain across 3G, 4G and 5G via DSS bands used when travelling throughout Australia & abroad. This powerful bullbar antenna provides the optimum 6 dBi gain, providing best performance in both flat remote areas and when travelling amongst hills and tall trees.
As a bullbar mounted antenna the Trucker Edge sports an extra-heavy-duty stainless-steel bell-spring for rough corrugations and a strong tapered fibreglass radome that provides consistent radiative performance in all directions. The antenna has a 4.5 metre PTL-240 Ultra-Flex cable which is an industry-standard for high vibration mining machinery and industrial plant and provides the lowest per-metre loss of all similar sized coaxial cables.
The antenna has been optimised for the cellular Low Band (700 to 960 MHz) which is used by all network operators as the primary band for voice & data services. With the coming 3G switch-off, Trucker Edge is built ready for 5G (NR850).
This antenna has been developed by the Powertec team as the ideal companion for CEL-FI ROAM. The antenna is supplied pre-terminated and pre-tuned, simply unpack and go.
Trucker Edge Features:
- 5G Ready*
- Optimum 6 dBi gain for flat and hilly areas
- Extra heavy-duty stainless steel spring
- High-vibration PTL-240 Ultra-Flex cabling
- 4.5 metres of cable with an industry-standard SMA Male connector.
*5G via Dynamic Spectrum Sharing (DSS) on compatible repeaters including the CEL-FI R41.
BOSCH Solution 6000 Keypad
- Keypad Integrated Wifi IP Module (2.5Ghz only)
- Tamper
- Alphanumeric LCD
- 144 zone
- White colout
- Touch tone & backlit keys
- Suits Solution 6000 panel
Warranty: 2 Year Bosch Manufacturer Warranty
BOSCH Solution 6000 Keypad
- Keypad Integrated Wifi IP Module (2.5Ghz only)
- Tamper
- Alphanumeric LCD
- 144 zone
- White colout
- Touch tone & backlit keys
- Suits Solution 6000 panel
Warranty: 2 Year Bosch Manufacturer Warranty
BOSCH Solution 6000 Keypad
- Keypad Integrated Wifi IP Module (2.5Ghz only)
- Tamper
- Alphanumeric LCD
- 144 zone
- White colout
- Touch tone & backlit keys
- Suits Solution 6000 panel
Warranty: 2 Year Bosch Manufacturer Warranty
BOSCH Solution 6000 Keypad
- Keypad Integrated Wifi IP Module (2.5Ghz only)
- Tamper
- Alphanumeric LCD
- 144 zone
- White colout
- Touch tone & backlit keys
- Suits Solution 6000 panel
Warranty: 2 Year Bosch Manufacturer Warranty
The 2J UHF 4G-5G WiFi X-Ultraband Embedded Adhesive Antenna is optimized for full-range signal strength and exceptional signal quality within 410MHz - 5925MHz frequencies. This compact antenna offers superior data transmission at low latencies, higher bit rate and advanced multiplexing techniques that result in maximum throughput while maintaining stable peak gains and efficiency across all bands.
FEATURES:
- Ultra Wide band Antenna
- Rigid Internal Antenna
- 410-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 4.2 dBi 5G NR Peak Gain
- High Performance
- Fiberglass Material
- Self-Adhesive
- Customizable Cable and Connector
2J UHF 4G-5G WiFi X-Ultraband Embedded Adhesive Antenna (2JP1180P)
The 2JP1180P comes with a standard U.FL connector and 1.37mm Mini-Coax cable measuring 180mm in length. 2J Antennas supports the health of our environment and production staff by manufacturing all our products without hazardous materials while maintaining full REACH and RoHS compliance.
The 2J UHF 4G-5G WiFi X-Ultraband Embedded Adhesive Antenna is optimized for full-range signal strength and exceptional signal quality within 410MHz - 5925MHz frequencies. This compact antenna offers superior data transmission at low latencies, higher bit rate and advanced multiplexing techniques that result in maximum throughput while maintaining stable peak gains and efficiency across all bands.
FEATURES:
- Ultra Wide band Antenna
- Rigid Internal Antenna
- 410-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 4.2 dBi 5G NR Peak Gain
- High Performance
- Fiberglass Material
- Self-Adhesive
- Customizable Cable and Connector
2J UHF 4G-5G WiFi X-Ultraband Embedded Adhesive Antenna (2JP1180P)
The 2JP1180P comes with a standard U.FL connector and 1.37mm Mini-Coax cable measuring 180mm in length. 2J Antennas supports the health of our environment and production staff by manufacturing all our products without hazardous materials while maintaining full REACH and RoHS compliance.
This 2-in-1 ultra-compact, fully waterproof adhesive mount external antenna combines enhanced mobile broadband (eMBB), high performance, ultra-reliable low-latency communication (URLLC) and navigation capabilities for the next generation MIMO devices, base station technology, carrier aggregation (CA) and global positioning systems (GPS).
FEATURES:
- Dipole antenna
- Ground plane independent
- Ultra-Wideband antenna: 619-5925MHz
- Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 1.6 dBi 5G NR peak gain
- High performance
- Hinged Connector
2J Sparrow 4G-5G WiFi Ultraband + GNSS 2-Port Combo Adhesive Antenna (2J4884PGF)
Manufactured with high-quality ABS UV stable material and IP67/ IP69 compliant design with additional sealer protection against external moisture and humidity which provides maximum protection in extreme outdoor applications The ground plane independent, small form factor, bar shape dimensions of 83 x 35 x 13.3 mm and high-grade adhesive mounting allow for easy installation on any non–metal surfaces. Cable 1 and Cable 2 come with standard SMA-Male connector and 300 cm long LL100 (Low Loss coaxial) cable known for good return loss, insertion loss and amplitude stability. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
This 2-in-1 ultra-compact, fully waterproof adhesive mount external antenna combines enhanced mobile broadband (eMBB), high performance, ultra-reliable low-latency communication (URLLC) and navigation capabilities for the next generation MIMO devices, base station technology, carrier aggregation (CA) and global positioning systems (GPS).
FEATURES:
- Dipole antenna
- Ground plane independent
- Ultra-Wideband antenna: 619-5925MHz
- Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 1.6 dBi 5G NR peak gain
- High performance
- Hinged Connector
2J Sparrow 4G-5G WiFi Ultraband + GNSS 2-Port Combo Adhesive Antenna (2J4884PGF)
Manufactured with high-quality ABS UV stable material and IP67/ IP69 compliant design with additional sealer protection against external moisture and humidity which provides maximum protection in extreme outdoor applications The ground plane independent, small form factor, bar shape dimensions of 83 x 35 x 13.3 mm and high-grade adhesive mounting allow for easy installation on any non–metal surfaces. Cable 1 and Cable 2 come with standard SMA-Male connector and 300 cm long LL100 (Low Loss coaxial) cable known for good return loss, insertion loss and amplitude stability. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
The 2J Phoenix 4G-5G Ultraband MIMO + Dual-Band WiFi-6E + GNSS 4-Port Combo Stud Antenna is a powerful and cost-effective antenna. This antenna is the ideal solution for industrial, commercial, and residential applications that operate on 617 MHz – 7125 MHz/ sub 6 GHz bands and where high performance, reliability, high data throughput and precision is high priority.
FEATURES:
- 4-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 3.2 dBi 5G NR Peak Gain
- 1.7 dBi WiFi Peak Gain
- High Performace
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range 1.5 - 3.6 V
- Low Profile
- Anti-Rotation Mounting
- Customizable Cable and Connector
2J Phoenix 4G-5G Ultraband MIMO + Dual-Band WiFi-6E + GNSS 4-Port Combo Stud Antenna (2J6986BGFc)
The low-profile 2J6986BGFc measures 80 x 74 x 25.6 mm and is fully IP67 and IP69 certified and the perfect antenna solution for external permanent outdoor installations. The boxed shaped antenna housing is manufactured with durable PC/ASA material available in black and white housing colours. 2J6986BGFc is ground plane independent and designed with an anti-rotation screw mount allowing installation to a wide range of surfaces without the need for grounding or free space. This antenna comes with standard SMA-Male (RP) connectors and 300 cm long D302 (cellular/ISM)/ D100 (GNSS) cables.
The 2J Phoenix 4G-5G Ultraband MIMO + Dual-Band WiFi-6E + GNSS 4-Port Combo Stud Antenna is a powerful and cost-effective antenna. This antenna is the ideal solution for industrial, commercial, and residential applications that operate on 617 MHz – 7125 MHz/ sub 6 GHz bands and where high performance, reliability, high data throughput and precision is high priority.
FEATURES:
- 4-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 3.2 dBi 5G NR Peak Gain
- 1.7 dBi WiFi Peak Gain
- High Performace
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range 1.5 - 3.6 V
- Low Profile
- Anti-Rotation Mounting
- Customizable Cable and Connector
2J Phoenix 4G-5G Ultraband MIMO + Dual-Band WiFi-6E + GNSS 4-Port Combo Stud Antenna (2J6986BGFc)
The low-profile 2J6986BGFc measures 80 x 74 x 25.6 mm and is fully IP67 and IP69 certified and the perfect antenna solution for external permanent outdoor installations. The boxed shaped antenna housing is manufactured with durable PC/ASA material available in black and white housing colours. 2J6986BGFc is ground plane independent and designed with an anti-rotation screw mount allowing installation to a wide range of surfaces without the need for grounding or free space. This antenna comes with standard SMA-Male (RP) connectors and 300 cm long D302 (cellular/ISM)/ D100 (GNSS) cables.
The 2J6983Ba antenna has been designed to operate between 617-5925 MHz frequencies, and will support 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-x, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G and CDMA standards. This antenna is a great solution to be well prepared for future technology worldwide such as NR (New Radio) and offers a reliable signal quality while taking advantage of the MIMO option.
FEATURES:
- 2-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 5.6 dBi 5G NR Peak Gain
- Anti-Rotation Mounting
- Low Profile
- Customizable Cable and Connector
2J Phoenix 4G-5G WiFi Ultraband 2x2 MIMO Stud Antenna (2J6983Ba)
The 2J6983Ba housing is IP67 and IP69 certified and manufactured from black or white PC / ASA material offering exceptional durability at a low cost for maximum protection from extreme outdoor applications. It comes with standard SMA-Male connector and 300 cm long D302 Coaxial cable, a popular choice for automotive applications due to its environmental properties. With a compact design (80 × 74 × 25.6 mm), ground plane independence and designed with a heavy-duty anti-rotation screw mount, this antenna can be securely and easily installed on vertical or horizontal surfaces without the need for grounding. . 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
The 2J6983Ba antenna has been designed to operate between 617-5925 MHz frequencies, and will support 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-x, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G and CDMA standards. This antenna is a great solution to be well prepared for future technology worldwide such as NR (New Radio) and offers a reliable signal quality while taking advantage of the MIMO option.
FEATURES:
- 2-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 5.6 dBi 5G NR Peak Gain
- Anti-Rotation Mounting
- Low Profile
- Customizable Cable and Connector
2J Phoenix 4G-5G WiFi Ultraband 2x2 MIMO Stud Antenna (2J6983Ba)
The 2J6983Ba housing is IP67 and IP69 certified and manufactured from black or white PC / ASA material offering exceptional durability at a low cost for maximum protection from extreme outdoor applications. It comes with standard SMA-Male connector and 300 cm long D302 Coaxial cable, a popular choice for automotive applications due to its environmental properties. With a compact design (80 × 74 × 25.6 mm), ground plane independence and designed with a heavy-duty anti-rotation screw mount, this antenna can be securely and easily installed on vertical or horizontal surfaces without the need for grounding. . 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
The 2J Phoenix 4G-5G WiFi Ultraband 2x2 MIMO + GNSS 3-Port Combo Stud Antenna is a cost-effective solution for industrial, commercial, and residential applications that rely on high performance, reliability, high data throughput and precision.
FEATURES:
- 3-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 5.1 dBi 5G NR Peak Gain
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range .5 - 3.6 V
- Low Profile
- Anti-Rotation Mounting
- Customizable Cable and Connector
2J Phoenix 4G-5G WiFi Ultraband 2x2 MIMO + GNSS 3-Port Combo Stud Antenna (2J6984BGFa)
The 2J Phoenix 4G-5G WiFi Ultraband 2x2 MIMO + GNSS 3-Port Combo Stud Antenna comes in a low-profile box shape antenna housing measures 80 x 74 x 25.6 mm and is manufactured with highly durable ASA UV stable material (available in black and white). Fully IP67 and IP69 certified, give this antenna full protection to water and dust in the harshest environments. Designed with a heavy-duty anti-rotation screw mount, this antenna can be securely and easily installed on vertical or horizontal surfaces without the need for grounding. With an omni-directional radiation pattern, the antenna position should be aligned in 360-degree line of sight for optimal and uninterrupted signal strength.
The 2J Phoenix 4G-5G WiFi Ultraband 2x2 MIMO + GNSS 3-Port Combo Stud Antenna is a cost-effective solution for industrial, commercial, and residential applications that rely on high performance, reliability, high data throughput and precision.
FEATURES:
- 3-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 5.1 dBi 5G NR Peak Gain
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range .5 - 3.6 V
- Low Profile
- Anti-Rotation Mounting
- Customizable Cable and Connector
2J Phoenix 4G-5G WiFi Ultraband 2x2 MIMO + GNSS 3-Port Combo Stud Antenna (2J6984BGFa)
The 2J Phoenix 4G-5G WiFi Ultraband 2x2 MIMO + GNSS 3-Port Combo Stud Antenna comes in a low-profile box shape antenna housing measures 80 x 74 x 25.6 mm and is manufactured with highly durable ASA UV stable material (available in black and white). Fully IP67 and IP69 certified, give this antenna full protection to water and dust in the harshest environments. Designed with a heavy-duty anti-rotation screw mount, this antenna can be securely and easily installed on vertical or horizontal surfaces without the need for grounding. With an omni-directional radiation pattern, the antenna position should be aligned in 360-degree line of sight for optimal and uninterrupted signal strength.
The 2J Mini-Shaker 4G Stud Mount Antenna (2J7624B) is designed to fit a wide range of installation requirements while keeping cost-effectiveness and reliable connectivity in mind. Designed with a low-profile housing, this antenna is ideal for high quality data and voice throughput for mobile, NB-IoT, LPWA, CAT-X/M and FirstNet applications that operate within 698 MHz to 2700 MHz frequencies.
FEATURES:
- Ground Plane Independent
- Wide Band Antenna
- 698-2700 MHz 4GLTE Bands
- 3.2 dBi 4G LTE Peak Gain
- Customizable Cable and Connector
2J Mini-Shaker 4G Stud Mount Antenna (2J7624B)
The 2J Mini-Shaker 4G Stud Mount Antenna is fully IP67 and IP69 rated with protection against ingress of moisture, water, dust, and high temperatures (-40C - +85C) without any compromise to antenna operations. The antenna housing is manufactured with commercial grade ASA material with a Zamak antenna base and double-sided foam gasket for extra protection. With compact measurements of Ø 50 x 50.8 mm make this ground plane independent antenna ideal for indoor or outdoor installations without restrictions. This antenna is tuned with a single 300 cm long DACAR100 cable that feeds through the anti-rotation screw mount and an SMA-Male end connection.
The 2J Mini-Shaker 4G Stud Mount Antenna (2J7624B) is designed to fit a wide range of installation requirements while keeping cost-effectiveness and reliable connectivity in mind. Designed with a low-profile housing, this antenna is ideal for high quality data and voice throughput for mobile, NB-IoT, LPWA, CAT-X/M and FirstNet applications that operate within 698 MHz to 2700 MHz frequencies.
FEATURES:
- Ground Plane Independent
- Wide Band Antenna
- 698-2700 MHz 4GLTE Bands
- 3.2 dBi 4G LTE Peak Gain
- Customizable Cable and Connector
2J Mini-Shaker 4G Stud Mount Antenna (2J7624B)
The 2J Mini-Shaker 4G Stud Mount Antenna is fully IP67 and IP69 rated with protection against ingress of moisture, water, dust, and high temperatures (-40C - +85C) without any compromise to antenna operations. The antenna housing is manufactured with commercial grade ASA material with a Zamak antenna base and double-sided foam gasket for extra protection. With compact measurements of Ø 50 x 50.8 mm make this ground plane independent antenna ideal for indoor or outdoor installations without restrictions. This antenna is tuned with a single 300 cm long DACAR100 cable that feeds through the anti-rotation screw mount and an SMA-Male end connection.
The 2J Medusa 4G-5G Ultraband MIMO + Dual-Band WiFi MIMO + GNSS 5-Port Combo Stud Antenna is the next-generation antenna that integrates durability, high performance, efficiency and ultra-reliable low-latency communication (URLLC) into a low-cost and permanent solution for medical emergency, construction, agriculture and transportation industries.
This Antenna offers 5 high-performance antennas that support 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G, WiFi, BT, ZigBee, ISM, GPS and GLONASS standards making it the most reliable antenna on the market.
FEATURES:
- 5-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 4.7 dBi 5G NR Peak Gain
- 5.3 dBi WiFi Peak Gain
- High Performance
- Active GNSS Antenna
- 24 dB GNSS Active Gain
- Post Filter GNSS
- GNSS Voltage Range 2.7 - 5.5 V
- Heavy Duty Antenna
- Lightweight Plastic Base
- Anti-Rotation Mounting
- Customizable Cable and Connector
2J Medusa 4G-5G Ultraband MIMO + Dual-Band WiFi MIMO + GNSS 5-Port Combo Stud Antenna (2J7B86BGFa)
The 2J Medusa 4G-5G Ultraband MIMO + Dual-Band WiFi MIMO + GNSS 5-Port Combo Stud Antenna is protected with a robust and heavy-duty housing made with high-quality acrylonitrile styrene acrylate (ASA) UV stable material, known for its thermal resistant properties, and a Zamak plastic antenna base as an alternative low-cost solution to the metal base options. This antenna is impact resistant, dust resistant and waterproof with full IP67, IP69 and IK09 certification making it ideal for external applications in harsh environmental conditions. Ground plane independence and reliable screw mount installation offer easy, permanent installations on a wide range of surfaces. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
The 2J Medusa 4G-5G Ultraband MIMO + Dual-Band WiFi MIMO + GNSS 5-Port Combo Stud Antenna is the next-generation antenna that integrates durability, high performance, efficiency and ultra-reliable low-latency communication (URLLC) into a low-cost and permanent solution for medical emergency, construction, agriculture and transportation industries.
This Antenna offers 5 high-performance antennas that support 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G, WiFi, BT, ZigBee, ISM, GPS and GLONASS standards making it the most reliable antenna on the market.
FEATURES:
- 5-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 4.7 dBi 5G NR Peak Gain
- 5.3 dBi WiFi Peak Gain
- High Performance
- Active GNSS Antenna
- 24 dB GNSS Active Gain
- Post Filter GNSS
- GNSS Voltage Range 2.7 - 5.5 V
- Heavy Duty Antenna
- Lightweight Plastic Base
- Anti-Rotation Mounting
- Customizable Cable and Connector
2J Medusa 4G-5G Ultraband MIMO + Dual-Band WiFi MIMO + GNSS 5-Port Combo Stud Antenna (2J7B86BGFa)
The 2J Medusa 4G-5G Ultraband MIMO + Dual-Band WiFi MIMO + GNSS 5-Port Combo Stud Antenna is protected with a robust and heavy-duty housing made with high-quality acrylonitrile styrene acrylate (ASA) UV stable material, known for its thermal resistant properties, and a Zamak plastic antenna base as an alternative low-cost solution to the metal base options. This antenna is impact resistant, dust resistant and waterproof with full IP67, IP69 and IK09 certification making it ideal for external applications in harsh environmental conditions. Ground plane independence and reliable screw mount installation offer easy, permanent installations on a wide range of surfaces. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
This versatile antenna combines high performance with full bandwidth coverage for 5G New Radio, UHF, 4G LTE and 3G/2G/CDMA cellular spectrums (617-5925 MHz). Available in black or white, the innovative hinged swivel design allows the antenna to be positioned in a straight, right or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
FEATURES:
- Dipole Antenna
- Ground Plane Independent
- Ultra Wide band Antenna
- 410-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 2.5 dBi 5G NR Peak Gain
- High Performance
- Hinged Connector
2J Machete UHF 4G-5G WiFi X-Ultraband Hinged Antenna (2JW0180z-C868B)
The antenna housing is manufactured from a PC/ABS UV Stable protective material, allowing it to withstand extreme temperatures ranging between -40C to +85C and making it ideal for outdoor applications. The design dimensions are 171 × 38 × 13.8 mm. This antenna is ground plane independent allowing for a wide range of installation options with minimal restrictions. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
This versatile antenna combines high performance with full bandwidth coverage for 5G New Radio, UHF, 4G LTE and 3G/2G/CDMA cellular spectrums (617-5925 MHz). Available in black or white, the innovative hinged swivel design allows the antenna to be positioned in a straight, right or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
FEATURES:
- Dipole Antenna
- Ground Plane Independent
- Ultra Wide band Antenna
- 410-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 2.5 dBi 5G NR Peak Gain
- High Performance
- Hinged Connector
2J Machete UHF 4G-5G WiFi X-Ultraband Hinged Antenna (2JW0180z-C868B)
The antenna housing is manufactured from a PC/ABS UV Stable protective material, allowing it to withstand extreme temperatures ranging between -40C to +85C and making it ideal for outdoor applications. The design dimensions are 171 × 38 × 13.8 mm. This antenna is ground plane independent allowing for a wide range of installation options with minimal restrictions. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
The 2J5083P brings exceptional signal strength and quality in a 360-degree radiation pattern due to its omni-directional design while maintaining high peak gains and efficiencies. This antenna is designed with CAT-M technology taking LTE into the next generation of IoT applications making it fully compatible with existing LTE networks and reducing implementation costs for carriers via backward-compatibility.
In addition, this antenna is a great solution to prepare for worldwide future technology such as NR (New Radio). 2J5083P offers NB-IoT (CAT-M2) designed to send data directly to primary servers eliminating the need for a gateway and keeping implementation costs low.
FEATURES:
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 3.6 dBi 5G NR Peak Gain
- Low Profile
- Customizable Cable and Connector
2J I-Bar 4G-5G WiFi Ultraband Adhesive Antenna (2J5083P)
With overall dimensions of only 116 x 22 x 6.7 mm, high-quality adhesive tape and PC/ABS UV stable housing, the 2J5083P can be installed on any glass or ABS surfaces found in the most extreme outdoor environments without any risk of failure. The 2J5083P features a standard SMA-Male connector and a 300 cm long LL100 cable.
As an added measure, this antenna was designed with ground plane independence in order to eliminate any grounding restrictions during the installation process. The health of the environment is important to 2J Antennas; therefore, all our products are manufactured without hazardous materials making us fully REACH and RoHS compliant.
The 2J5083P brings exceptional signal strength and quality in a 360-degree radiation pattern due to its omni-directional design while maintaining high peak gains and efficiencies. This antenna is designed with CAT-M technology taking LTE into the next generation of IoT applications making it fully compatible with existing LTE networks and reducing implementation costs for carriers via backward-compatibility.
In addition, this antenna is a great solution to prepare for worldwide future technology such as NR (New Radio). 2J5083P offers NB-IoT (CAT-M2) designed to send data directly to primary servers eliminating the need for a gateway and keeping implementation costs low.
FEATURES:
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 3.6 dBi 5G NR Peak Gain
- Low Profile
- Customizable Cable and Connector
2J I-Bar 4G-5G WiFi Ultraband Adhesive Antenna (2J5083P)
With overall dimensions of only 116 x 22 x 6.7 mm, high-quality adhesive tape and PC/ABS UV stable housing, the 2J5083P can be installed on any glass or ABS surfaces found in the most extreme outdoor environments without any risk of failure. The 2J5083P features a standard SMA-Male connector and a 300 cm long LL100 cable.
As an added measure, this antenna was designed with ground plane independence in order to eliminate any grounding restrictions during the installation process. The health of the environment is important to 2J Antennas; therefore, all our products are manufactured without hazardous materials making us fully REACH and RoHS compliant.
The 2J Falcon 4G-5G WiFi Ultraband MIMO + GNSS Adhesive Antenna is designed for MIMO devices operating within 617-5925 MHz frequencies serving 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-x, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G,CDMA as well as GPS/QZSS/Galileo GNSS standards. The low-profile compact design and high-quality adhesive mount make this antenna an ideal solution for outdoor applications with quick and easy installation on a wide range of surfaces.
FEATURES:
- 3-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 4.9 dBi 5G NR Peak Gain
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range 1.5 - 3.6 V
- Low Profile
- Customisable Cable and Connector
2J Falcon 4G-5G WiFi Ultraband MIMO + GNSS Adhesive Antenna (2J6084PGFa)
The 2J6084PGFa housing is IP67 certified and manufactured from black or white ABS / UV stable material offering exceptional durability at a low cost for maximum protection from extreme outdoor applications. Cable 1 and 2 come with standard SMA-Male connector and 300 cm long DACAR302 Coaxial cable, a popular choice for automotive applications due to its environmental properties, best coupling resistance and stable impedance. Cable 3 comes with standard SMA-Male connector and 300 cm long LMR100 Low Loss Coaxial cable offering an economical solution with excellent performance for short antenna runs. With a compact design (80 x 76 x 16 mm), ground plane independence and high-grade adhesive mounting allow for easy installation on any non-metal surfaces. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully RoHS compliant.
The 2J Falcon 4G-5G WiFi Ultraband MIMO + GNSS Adhesive Antenna is designed for MIMO devices operating within 617-5925 MHz frequencies serving 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-x, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G,CDMA as well as GPS/QZSS/Galileo GNSS standards. The low-profile compact design and high-quality adhesive mount make this antenna an ideal solution for outdoor applications with quick and easy installation on a wide range of surfaces.
FEATURES:
- 3-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 4.9 dBi 5G NR Peak Gain
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range 1.5 - 3.6 V
- Low Profile
- Customisable Cable and Connector
2J Falcon 4G-5G WiFi Ultraband MIMO + GNSS Adhesive Antenna (2J6084PGFa)
The 2J6084PGFa housing is IP67 certified and manufactured from black or white ABS / UV stable material offering exceptional durability at a low cost for maximum protection from extreme outdoor applications. Cable 1 and 2 come with standard SMA-Male connector and 300 cm long DACAR302 Coaxial cable, a popular choice for automotive applications due to its environmental properties, best coupling resistance and stable impedance. Cable 3 comes with standard SMA-Male connector and 300 cm long LMR100 Low Loss Coaxial cable offering an economical solution with excellent performance for short antenna runs. With a compact design (80 x 76 x 16 mm), ground plane independence and high-grade adhesive mounting allow for easy installation on any non-metal surfaces. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully RoHS compliant.
This versatile antenna combines high performance with full bandwidth coverage for 5G NR, 4G LTE and 3G/2G/CDMA cellular spectrums and the smallest antenna design on the market. The innovative hinged swivel design allows the antenna to be positioned in a straight, right or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
FEATURES:
- Dipole antenna
- Ground plane independent
- Ultra-Wideband antenna:
- 617-3800 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 0.6 dBi 5G NR peak gain
- High performance
- Waterproof antenna
2J Dagger 4G-5G Weatherproof Terminal Antenna 2JW1483
The slim design (192 x 20 x 18 mm), SMA-Male connector and dipole topology allow for easy direct installation to any NEMA rated, plastic or metal enclosures. Manufactured with PC/ ABS UV stable materials, this antenna is the most durable on the market with full IP67 and IP69 certification. The 2JW1483 is ground plane independent eliminating any grounding restrictions during the installation process. The health of the environment is important to 2J Antennas; therefore, all our products are manufactured without hazardous materials making us fully REACH and RoHS compliant.
This versatile antenna combines high performance with full bandwidth coverage for 5G NR, 4G LTE and 3G/2G/CDMA cellular spectrums and the smallest antenna design on the market. The innovative hinged swivel design allows the antenna to be positioned in a straight, right or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
FEATURES:
- Dipole antenna
- Ground plane independent
- Ultra-Wideband antenna:
- 617-3800 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 0.6 dBi 5G NR peak gain
- High performance
- Waterproof antenna
2J Dagger 4G-5G Weatherproof Terminal Antenna 2JW1483
The slim design (192 x 20 x 18 mm), SMA-Male connector and dipole topology allow for easy direct installation to any NEMA rated, plastic or metal enclosures. Manufactured with PC/ ABS UV stable materials, this antenna is the most durable on the market with full IP67 and IP69 certification. The 2JW1483 is ground plane independent eliminating any grounding restrictions during the installation process. The health of the environment is important to 2J Antennas; therefore, all our products are manufactured without hazardous materials making us fully REACH and RoHS compliant.
The 2J Condor Antenna comes with compact bar shape housing (58.7 x 157.6 x 14.4 mm) and a separate double-adhesive pad, and can be securely and safely installed on any type of surfaces such as windshields, dashboards, plastics, etc.
FEATURES:
- 5-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 1.7 dBi 5G NR Peak Gain
- 4.9 dBi WiFi Peak Gain
- High Performance
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range 1.5 - 3.6 V
- Low Profile
- Customizable Cable and Connector
2J Condor 4G-5G MIMO + Dual-Band WiFi MIMO + GNSS 5-Port Combo Adhesive Antenna (2J4A86PCFa)
The 2J Condor offers a 5-in-1 cable selection in the same enclosure covering a wide bandwidth (617 – 5925 MHz). The 2J4A86PCFa supports 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G, WiFi, BT, ZigBee, ISM, GPS, QZSS, Galileo and GLONASS standards making it the most reliable antenna on the market for the following suggested applications:
| Typical applications - 5G Networks - Intelligent Machine Control - WiFi hotspot - HD video transmission - First Responders and Emergency Services - GPS-enabled IoT Applications - Self-driving cars - V2V, V2X and Fleet management - Gateways - Routers - Public transportation - Logistics | Compatibility Standards 5GNR Cables - 5GNR, 4GLTE, FirstNet, CBRS, LPWA - CAT 1 2 3 4 5 6 7 8 9 10 11 12 - NB-IoT, LTE-NB1, CAT-M1, CAT-M2, WCDMA, UMTS, HSPA, - EDGE GRPS, GSM, CDMA 2.4/5.0 Cables - WiFi, Bluetooth, BLE, ISM - DSRC, V2V, V2X - Sigfox, LoRa, ZigBee, RPMA, LPWAN GPS/GLO/BEI Cable - GPS, GLONASS, BeiDou - Galileo, QZSS, L1, E1, B1 |
The 2J Condor Antenna comes with compact bar shape housing (58.7 x 157.6 x 14.4 mm) and a separate double-adhesive pad, and can be securely and safely installed on any type of surfaces such as windshields, dashboards, plastics, etc.
FEATURES:
- 5-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 1.7 dBi 5G NR Peak Gain
- 4.9 dBi WiFi Peak Gain
- High Performance
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range 1.5 - 3.6 V
- Low Profile
- Customizable Cable and Connector
2J Condor 4G-5G MIMO + Dual-Band WiFi MIMO + GNSS 5-Port Combo Adhesive Antenna (2J4A86PCFa)
The 2J Condor offers a 5-in-1 cable selection in the same enclosure covering a wide bandwidth (617 – 5925 MHz). The 2J4A86PCFa supports 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G, 2G, WiFi, BT, ZigBee, ISM, GPS, QZSS, Galileo and GLONASS standards making it the most reliable antenna on the market for the following suggested applications:
| Typical applications - 5G Networks - Intelligent Machine Control - WiFi hotspot - HD video transmission - First Responders and Emergency Services - GPS-enabled IoT Applications - Self-driving cars - V2V, V2X and Fleet management - Gateways - Routers - Public transportation - Logistics | Compatibility Standards 5GNR Cables - 5GNR, 4GLTE, FirstNet, CBRS, LPWA - CAT 1 2 3 4 5 6 7 8 9 10 11 12 - NB-IoT, LTE-NB1, CAT-M1, CAT-M2, WCDMA, UMTS, HSPA, - EDGE GRPS, GSM, CDMA 2.4/5.0 Cables - WiFi, Bluetooth, BLE, ISM - DSRC, V2V, V2X - Sigfox, LoRa, ZigBee, RPMA, LPWAN GPS/GLO/BEI Cable - GPS, GLONASS, BeiDou - Galileo, QZSS, L1, E1, B1 |
The 2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna offers a ground plane dependent internal antenna designed with a compact form factor ideal for space-restricted device integration. This antenna is manufactured out of high-grade fiberglass, a material known for durability and resistance to extreme temperatures ranging between -40C and +85C. Proper antenna placement is fundamental for optimal performance and ideal for extremely small PCB application requirements by taking up minimal space without compromising performance.
FEATURES:
- Ultra Wide band Antenna
- SMT Brick Embedded Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Dependent
- 3.1 dBi 5G NR Peak Gain
- High Performance
- Fiberglass Material
- Compact Size
- Easy to Integrate
2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna 2JE71
The 2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna is designed with omni-directional coverage and is optimized for 360-degree signal strength while maintaining stable gains and efficiency across all bands. The new 5GNR technology enhances mobile broadband and ultra-reliable low-latency communications. Edge and EV-DO are designed for digital mobile phone technology and wireless internet access improving data transmission while maintaining higher bit rates and advanced multiplexing techniques resulting in increased capacity and maximum throughput.
The 2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna offers a ground plane dependent internal antenna designed with a compact form factor ideal for space-restricted device integration. This antenna is manufactured out of high-grade fiberglass, a material known for durability and resistance to extreme temperatures ranging between -40C and +85C. Proper antenna placement is fundamental for optimal performance and ideal for extremely small PCB application requirements by taking up minimal space without compromising performance.
FEATURES:
- Ultra Wide band Antenna
- SMT Brick Embedded Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Dependent
- 3.1 dBi 5G NR Peak Gain
- High Performance
- Fiberglass Material
- Compact Size
- Easy to Integrate
2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna 2JE71
The 2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna is designed with omni-directional coverage and is optimized for 360-degree signal strength while maintaining stable gains and efficiency across all bands. The new 5GNR technology enhances mobile broadband and ultra-reliable low-latency communications. Edge and EV-DO are designed for digital mobile phone technology and wireless internet access improving data transmission while maintaining higher bit rates and advanced multiplexing techniques resulting in increased capacity and maximum throughput.
This versatile antenna combines high performance with full bandwidth coverage for 5G NR, 4G LTE, and 3G/2G/CDMA cellular spectrums and the smallest antenna design on the market. The innovative hinged swivel design allows the antenna to be positioned in a straight, right, or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
Features:
- Dipole antenna
- Ground plane independent
- Ultra-Wideband antenna: 619-5925MHz
- Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 1.6 dBi 5G NR peak gain
- High performance
- Hinged Connector
Suggested Applications:
- Terminals, Base Stations and Routers
- High Traffic MIMO Device Connectivity
- Industrial, Commercial and Residential IoT
- Industrial, Commercial and Residential Smart Home / Office
- ATM Machines
- IoT Dispensers
- Vending Machines
- Electrical Metering
The antenna housing is manufactured from a PC/ABS UV protective material, allowing it to withstand extreme temperatures ranging between -40C to +85C and making it ideal for outdoor applications. The design dimensions are 135 x 19 x 10 mm (straight angle), 110 x 42 x 10 mm (right angle) and 88 x 112 x 10 mm (45-degree angle). This antenna is ground plane independent allowing for a wide range of installation options with minimal restrictions.
This versatile antenna combines high performance with full bandwidth coverage for 5G NR, 4G LTE, and 3G/2G/CDMA cellular spectrums and the smallest antenna design on the market. The innovative hinged swivel design allows the antenna to be positioned in a straight, right, or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
Features:
- Dipole antenna
- Ground plane independent
- Ultra-Wideband antenna: 619-5925MHz
- Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 1.6 dBi 5G NR peak gain
- High performance
- Hinged Connector
Suggested Applications:
- Terminals, Base Stations and Routers
- High Traffic MIMO Device Connectivity
- Industrial, Commercial and Residential IoT
- Industrial, Commercial and Residential Smart Home / Office
- ATM Machines
- IoT Dispensers
- Vending Machines
- Electrical Metering
The antenna housing is manufactured from a PC/ABS UV protective material, allowing it to withstand extreme temperatures ranging between -40C to +85C and making it ideal for outdoor applications. The design dimensions are 135 x 19 x 10 mm (straight angle), 110 x 42 x 10 mm (right angle) and 88 x 112 x 10 mm (45-degree angle). This antenna is ground plane independent allowing for a wide range of installation options with minimal restrictions.