Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A
The Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.
Model: S1890A
NX Remote Control Kit with 2 x Stainless steel remotes
RSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,
It can be set to work with NX/Reliance alarm panels to operate Arm (away/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door
Specifications
Remote
- Operating Range: A minimum of 50m (open air)
- 433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+/- 75KHz)
- Transmitting power: <10mW
- Operating Voltage: 6 V powered by 2 x 3 VDC lithium batteries
- Battery Life: 3 years under normal operating conditions
- Current: <1uA standby; 12mA max.
- Low battery indication: LED on the remote flashes when the button is pressed
- Auto shutoff: the remote stops transmitting if a button gets pressed for 25s.
Receiver
- Operating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.
Outputs:
- Data – Arm (away/stay), Disarm and Panic. 4-wire harness provided
- Two programmable relay outputs; SPDT; rating 1A 24VDC/120VAC
- Chirp & Flash “Switch to Ground” outputs for Arm and Disarm notification
- Standard capacity: 25 remotes
- Mounting plate provided for quick receiver installation
Warranty Information
LIMITED WARRANTIES
Limited Warranties are non-transferable. The following Limited Warranties are given to the original retail purchaser of the following Ashley Furniture Industries, Inc.Products:
Frames Used In Upholstered and Leather Products
Limited Lifetime Warranty
A Limited Lifetime Warranty applies to all frames used in sofas, couches, love seats, upholstered chairs, ottomans, sectionals, and sleepers. Ashley Furniture Industries,Inc. warrants these components to you, the original retail purchaser, to be free from material manufacturing defects.
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
-
{"id":7683082616921,"title":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","handle":"hills-reliance-nx-remote-control-kit-with-2-x-stainless-steel-remotes-s1890a","description":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-06-13T22:53:27+10:00","created_at":"2024-05-27T11:56:47+10:00","vendor":"Hills Reliance","type":"Hills Reliance","tags":["Hills Reliance","NX Series","Remote Control Kit"],"price":13200,"price_min":13200,"price_max":13200,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41533930537049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSI-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","public_title":null,"options":["Default Title"],"price":13200,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","options":["Title"],"media":[{"alt":null,"id":25271276503129,"position":1,"preview_image":{"aspect_ratio":1.155,"height":637,"width":736,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"},"aspect_ratio":1.155,"height":637,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","width":736}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price $199.00 -
-
{"id":7683082616921,"title":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","handle":"hills-reliance-nx-remote-control-kit-with-2-x-stainless-steel-remotes-s1890a","description":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-06-13T22:53:27+10:00","created_at":"2024-05-27T11:56:47+10:00","vendor":"Hills Reliance","type":"Hills Reliance","tags":["Hills Reliance","NX Series","Remote Control Kit"],"price":13200,"price_min":13200,"price_max":13200,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41533930537049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSI-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","public_title":null,"options":["Default Title"],"price":13200,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","options":["Title"],"media":[{"alt":null,"id":25271276503129,"position":1,"preview_image":{"aspect_ratio":1.155,"height":637,"width":736,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"},"aspect_ratio":1.155,"height":637,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","width":736}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price $159.00 -
-
{"id":7683082616921,"title":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","handle":"hills-reliance-nx-remote-control-kit-with-2-x-stainless-steel-remotes-s1890a","description":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-06-13T22:53:27+10:00","created_at":"2024-05-27T11:56:47+10:00","vendor":"Hills Reliance","type":"Hills Reliance","tags":["Hills Reliance","NX Series","Remote Control Kit"],"price":13200,"price_min":13200,"price_max":13200,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41533930537049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSI-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","public_title":null,"options":["Default Title"],"price":13200,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","options":["Title"],"media":[{"alt":null,"id":25271276503129,"position":1,"preview_image":{"aspect_ratio":1.155,"height":637,"width":736,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"},"aspect_ratio":1.155,"height":637,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","width":736}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
-
{"id":7683082616921,"title":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","handle":"hills-reliance-nx-remote-control-kit-with-2-x-stainless-steel-remotes-s1890a","description":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-06-13T22:53:27+10:00","created_at":"2024-05-27T11:56:47+10:00","vendor":"Hills Reliance","type":"Hills Reliance","tags":["Hills Reliance","NX Series","Remote Control Kit"],"price":13200,"price_min":13200,"price_max":13200,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41533930537049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSI-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","public_title":null,"options":["Default Title"],"price":13200,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","options":["Title"],"media":[{"alt":null,"id":25271276503129,"position":1,"preview_image":{"aspect_ratio":1.155,"height":637,"width":736,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"},"aspect_ratio":1.155,"height":637,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","width":736}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price $95.00 -
-
{"id":7683082616921,"title":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","handle":"hills-reliance-nx-remote-control-kit-with-2-x-stainless-steel-remotes-s1890a","description":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-06-13T22:53:27+10:00","created_at":"2024-05-27T11:56:47+10:00","vendor":"Hills Reliance","type":"Hills Reliance","tags":["Hills Reliance","NX Series","Remote Control Kit"],"price":13200,"price_min":13200,"price_max":13200,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41533930537049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSI-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","public_title":null,"options":["Default Title"],"price":13200,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","options":["Title"],"media":[{"alt":null,"id":25271276503129,"position":1,"preview_image":{"aspect_ratio":1.155,"height":637,"width":736,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"},"aspect_ratio":1.155,"height":637,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","width":736}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price $139.00 -
-
{"id":7683082616921,"title":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","handle":"hills-reliance-nx-remote-control-kit-with-2-x-stainless-steel-remotes-s1890a","description":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-06-13T22:53:27+10:00","created_at":"2024-05-27T11:56:47+10:00","vendor":"Hills Reliance","type":"Hills Reliance","tags":["Hills Reliance","NX Series","Remote Control Kit"],"price":13200,"price_min":13200,"price_max":13200,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41533930537049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSI-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hills Reliance NX Remote Control Kit with 2 x Stainless steel remotes, S1890A","public_title":null,"options":["Default Title"],"price":13200,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"],"featured_image":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","options":["Title"],"media":[{"alt":null,"id":25271276503129,"position":1,"preview_image":{"aspect_ratio":1.155,"height":637,"width":736,"src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007"},"aspect_ratio":1.155,"height":637,"media_type":"image","src":"\/\/tekcart.com.au\/cdn\/shop\/files\/Hills-Reliance-NX-Remote-Control-Kit-with-2-x-Stainless-steel-remotes--S1890A.png?v=1716775007","width":736}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\u003cspan\u003eThe Hills Reliance NX Remote Control Kit comes complete with wireless receiver and two x stainless steel remotes with slide cover. Compatible with the Hills alarm control panels.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003eModel: S1890A\u003c\/h3\u003e\n\u003ch3\u003eNX Remote Control Kit with 2 x Stainless steel remotes\u003c\/h3\u003e\n\u003cp\u003eRSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting plate. Through Jumper Setting,\u003c\/p\u003e\n\u003cp\u003eIt can be set to work with NX\/Reliance alarm panels to operate Arm (away\/stay), Disarm and Panic via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other devices such as garage door\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRemote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: A minimum of 50m (open air)\u003c\/li\u003e\n\u003cli\u003e433.92 MHz Keeloq rolling code: 4.3 billion combination; SAW resonator (filter) locked (+\/- 75KHz)\u003c\/li\u003e\n\u003cli\u003eTransmitting power: \u0026lt;10mW\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6 V powered by 2 x 3 VDC lithium batteries\u003c\/li\u003e\n\u003cli\u003eBattery Life: 3 years under normal operating conditions\u003c\/li\u003e\n\u003cli\u003eCurrent: \u0026lt;1uA standby; 12mA max.\u003c\/li\u003e\n\u003cli\u003eLow battery indication: LED on the remote flashes when the button is pressed\u003c\/li\u003e\n\u003cli\u003eAuto shutoff: the remote stops transmitting if a button gets pressed for 25s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 9-15VDC; Current: 10mA Standby; 100mA max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eData – Arm (away\/stay), Disarm and Panic. 4-wire harness provided\u003c\/li\u003e\n\u003cli\u003eTwo programmable relay outputs; SPDT; rating 1A 24VDC\/120VAC\u003c\/li\u003e\n\u003cli\u003eChirp \u0026amp; Flash “Switch to Ground” outputs for Arm and Disarm notification\u003c\/li\u003e\n\u003cli\u003eStandard capacity: 25 remotes\u003c\/li\u003e\n\u003cli\u003eMounting plate provided for quick receiver installation\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price $269.00
Stock Availability
- Online: ❌ Out of Stock
- In-Store: ❌ Out of Stock